The URL can be used to link to this page

Home My WebLink AboutARB201800146 Application 2018-11-08Albemarle County Planning Application CC MMLnity Development Departmerd 431 r.eintire Road Charlottesville-VA22-002-4596 Voice: (4341, 29S-5832 Fax: 1434) 972-4126 TMP j 045BI-06-00-001BO Owner(s) -'JEFFERSON REALTY PARTNERS LLC Application #I ARS20180014 Legal Description CARFSBROOKJD PARCEL 0-18 Magisterial Dist, Rio Land Use Primary Commercial Current AFD r Not In A/F District Current Zoning Primary Highway Commercial APPLICATION INFORKATI[ON StreetAddress 1 2331 SEMINOLE LN CHARLOTTESVILLE, 22901 Entered By Application Type Architectural Review Board . Buck Smith IVZ12016 174 Project FAYER PT INSTITUTE - SIGN Rec"d Date 11/01/18 Received Date Final Submittal Date JL Total Fees Closing File Date J Submittal Date Finals I Total Paid Revision Number Comments Legal Ad SUB APPLICATION(s) Type- %bii tioL-----CorrTrarA SIGN APPLICANT J CONTACT INFORMATION — C~Type I Na re Address CityState Zip %me J. PtwoCell Signature of Contractor or Authorized Agent Date Application and Checklist for Sign Permittt. Part A: Applicant and Parcel Information project Name: Drayer PT Institute Address: 2331 Seminole Ln. Ste 103 Charlottesville, Va Tax map and parcel(s): 045B1 -06-00-001B0 zoning: HC Contact Person (Who should we cal/write concerning this project?): Casey Kilmartin Address 1766 Scottsville Rd Ste A City Charlottesville State VA zip 22902 Daytime Phone L_) 434-295-1924 Fax # C__) 434-295-1926 E-mail ckilmartin@gropen.com Owner of Record: Jefferson Realty Partners LLC ® Address 2123 Ivy Rd Ste A City Charlottesville State Va Zip 22903 Daytime Phone L_) 434-284-8184 Fax # L_) 434-284-8183 E-mail normb@ntbrinkmanco.com Contractor Name/Business Name: Gropen 2. Address 1766 Scottsville Rd Ste A City Charlottesville State Va Zip 22902 Daytime Phone L ) 434-295-1924 Fax# C__) 434-295-1926 E-mail Iroutson@gropen.eom Part B: Determining. application requirements and fees 1. Sign Permit — Please indicate which sign type you are applying for: ❑ Freestanding or Monument Sign: $91.64 ❑ If a footing is required, an additional fee is required: $32.64 ® Wall Sign (Including property, awning, fuel pump canopy signs): $91.64 ❑ Sign Refacing: $59.00 2. Electrical Permit — Will the sign be illuminated? ® Yes (Illuminated signs require an electrical permit and an electrical schematic.) $48.96 ❑ No $ 0.00 3. ARE Review — Will the permanent sign(s) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages) ® Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages.) ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $140.60 f FOR OFFICE USE.ONLY 13p#P# 1 I / ARB# , �] l �� C� r Fee Amount $ v - 1 U Date P.4/1-7/ By who? �f Zae 14- Receipt # 116TV Check 42M By 004 - County of Albemarle Department of Community Development 401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 972-4126 11/1/2015 Page 1 of 4- 2A of Part C: Submittal Items Required Note: Submittal packages must contain 4 collated copies of all information unless otherwise indicated.. Additional submittal materials may be mquh-ed if review by the Architectural Review Board is necessary. Applicants will be notified if additional materials or ARB review are required. ' SECTION 1: FREESTANDING, SUBDIVISION OR DIRECTORY SIGNS A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way. ❑ A footing/foundation diagram showing how the base or pole will be anchored in the ground. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot he detected nor can objects be seen through it.) o Identification of proposed materials and colors. Include standard color id numbers (Panton, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. o Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) B. Inspection Requirements for Freestanding, Subdivision or Directory Signs ❑ Applicant must mark the location of the property lines and the location of the sign with stakes in preparation for a preliminary zoning inspection. (All four corners of the sign must be marked with stakes that are easily visible to all inspectors.) ❑ A preliminary zoning inspection must be completed to verify the location of the sign before the permit can be issued. ❑ Freestanding signs are required to have footing inspections. (scheduled by applicant) ❑ Freestanding signs are required to have electrical inspections if illuminated. (scheduled by applicant) ❑ Freestanding signs are required to have final building and zoning inspections. (scheduled by applicant) 11/1/2015 Page 2 of SECTION 2: WALL SIGNS I I A. Submittal Requirements i ® A drawing, to scale, showing dimensions of the sign (length, height, depth). m Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ® The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B_) ® Sign lettering and/or graphics in their proposed location. ® Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: o Indication of sign type (channel letters, cabinet, panel, etc.). o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Panton, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. o Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Location of proposed light futures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. o. For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it. Internally illuminated cabinets must have ovaaue backgrounds.) B. Inspection Requirements for Wall or Projecting Signs ® Wall and projecting signs are required to have electrical inspections if illuminated. (Scheduled by applicant) Q� Wall and projecting signs are required to have final buildiE& and zoning inspections.(Scheduled by a licdnt) SECTION 3. ILLUMINATION REQUIREMENTS I I A. If the proposed sign is to be illuminated, the applicant must provide the following: I ® Electrical permit ® Electrical schematic ® The location of proposed light fixtures identified on a plan and/or elevation m Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zonina Ordinance. SECTION 4: WORK VALUATION 11/1/2015 Page 3 of 4 A. Work Valuation $ Part D: Applicant Agreement Applicant must read and sign • Each application package must contain 4 folded copies of all plans and documents being submitted. Only 1 set of material/color samples is required. All submittal items become the property of Albemarle County. Applicants are encouraged to maintain duplicate copies in their own files. • The application package is not complete without this checklist, completed, signed, and included with the required submittal materials indicated on the checklist. I hereby certify that the information provided on this application and accompanying information is accurate, true and correct to the best of my knowledge and belief and contains all information required by these checklists fil I 104A AA 10-26-18 Signature of person completing checklist Date Lauren Routsonl Administrative Assistant 434-295-1924 Ext 100 Printed Name / Title Daytime phone number of Signatory County of Albemarle Department of Community Development 401 McIntire Road, North Wing, Charlottesville, VA 22902-4596 (434) 296-5832 Tel, (434) 972-4126 Fax www.albemarle.org I 1/1/2015 Page 4 of 4 Sign Diagrams Sign Dimensions Sign Height 10 Distance to property line or edge of right-of-way Sign Height = Sign Dimensions Pole -Mounted Sign — Diagram 1 (Generally not acceptable in the ECs) j L t Sign Sign Dimensions Height Building Frontage Building Frontage = 50 ft Sign Height = 163 112 " Sign Dimensions =12 9/16 " by 157 11116" Wall Sign — Diagram 3 Sign 2 Height = Sign 2 Dimensions = Sign 3 Height = Sign 3 Dimensions = Sign Dimensions Sign Height Distance to property line or edge of right-of-way Sign Height = Sign Dimensions = Monument Sign — Diagram 2 If multiple wall signs are proposed, list dimensions here: Sign 4 Height = Sign 4 Dimensions = Sign 5 Height = Sign 5 Dimensions= _ Sign Diagrams revised 712009 — t