The URL can be used to link to this page

Home My WebLink AboutARB201800077 Checklist 2019-01-31HNM 1/31/19 RESUBMITTAL REVIEW CHECKLIST ARB 2018-77: Northtown Center Comprehensive Sign Plan and ULC Sign Previous ARB Comment 8-10-18 1-31-19 Review 1. Revise the Comprehensive Sign Plan mounting details OK, "mounting details" = "Channel letters mounted on raceway." criterion to state all channel letter signs shall be mounted on a raceway. 2. Revise the Comprehensive Sign Plan raceway color OK, "raceway color" = "to match the color of the wall to which it is criterion to state "to match the color of the wall to which it attached." is attached." 3. Revise drawing A1.4 so that the proposed height of the sign Done, but now the position is not centered vertically in the 4' sign on the south end unit is 18'-0" from grade. band. 4. Revise the architectural elevations to depict the buildings OK as built; rectify the discrepancy between the canopy cables shown on the elevations and the appearances of the storefronts as built. 5. Revise the Comprehensive Sign Plan location criterion to OK, "location" = "centered horizontally within the sign areas state: centered horizontally within the sign areas as outlined outlined on the approved drawings on the west & south elevation on the approved drawings on the west and south elevations of Building A; on the west elevation of Building B; & on the north & of Building A; on the west elevation of Building B; and on west elevation of Building C." the north and west elevations of Building C. 6. Provide drawings of the Gander Mountain building OK (Building C, 440 Gander Drive) which show proposed sign placement, size and sin type. 7. Revise the Comprehensive Sign Plan size limit criterion so OK, "size limit" = "Letters: Building A — 27"; Building B — 15-18"; no proposed letter shall exceed 27 inches in height for Building C — 48"." individual letters on Buildings A. OK, "graphic details" = "Maximum Graphic: Building A — 84"; 8. Revise the Comprehensive Sign Plan size limit criterion so that the appropriate letter height for signs on Building B is Building B — 30"; Building C — 72"." between 15 and 18 inches and the logo/graphic height shall not exceed 30 inches. 9. Revise the Comprehensive Sign Plan size limit criterion to establish an appropriate letter height for proposed signs on Building C. 10. Revise the Comprehensive Sign Plan size limit criterion to specify the maximum height of proposed logos and graphics on Buildings A and C. HNM 1/31/19 Previous ARB Comment 8-10-18 1-31-19 Review 11. Revise the Comprehensive Sign Plan to name approved OK, "material" _ "acrylic, plexiglass or similar for letter faces & materials: acrylic, plexiglass or similar for letter faces and aluminum return." aluminum returns. 12. Revise the Comprehensive Sign Plan trim cap/return color OK, "trim cap/return color" _ "black, bronze, brushed aluminum or criterion to state black, bronze, brushed aluminum, or to to match the letter face color." match the letter face color. 13. Revise the Comprehensive Sign Plan letter type font OK, "letter type font" _ "maximum limit of three typefaces. criterion to state a maximum limit of three typefaces. Additional typefaces may be approved only if they contribute to a Additional typefaces may be approved only if they balanced, legible, unified sign design." contribute to a balanced, legible, unified sign design. 14. Revise the Comprehensive Sign Plan logo graphics details Not done. to limit the logo colors as per the EC Sin Guidelines. 15. Revise the Comprehensive Sign Plan illumination details They excised "Illumination details" as a criterion from this revised criterion to propose internal illumination preferred with CSP --> the internal illumination of the letters (as opposed to the external illumination as an option. illumination of the graphics) is now unspecified. 16. Revise the Comprehensive Sign Plan logo graphics details OK, "graphics details" _ "Internal illumination of graphics is not to specify illumination details. approved except for the ULC graphic that is being moved from an existing location. External illumination of graphics acceptable." Previous ARB Comment 1-7-19 1-31-19 Review 1. Red, white and blue are approved colors. Black can be OK, the CSP states "letter face color" = white, red, or blue with used as an accent color. black as an accent. 2. Internal illumination of graphics is not approved, except OK, "graphics details" _ "Internal illumination of graphics is not for the ULC graphic that is being moved from an existing approved except for the ULC graphic that is being moved from an location. External illumination of graphics is acceptable. existing location. External illumination of graphics acceptable." 3. The 4' letter height for Goodwill is acceptable. OK, the Building C letter size criterion = 48" height maximum Completeness Check for Signs Project #/Name• > - / f - 7 Date Received at County: 5_f l Date Received in Design Planning: Date of Checklist Check: 7// Assigned to/Date: FEES 3. ARB Review —Will the permanent signs) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a Comprehensive Sign Review. See ARB requirements next pages) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Comprehensive Sign Review. See ARB requirements next pages) ❑ No ('Phis sign will not be constructed in an Entrance Corridor) FEE TOTAL (Please add all the amounts checked in sections 1— 3): FREESTANDING SIGNS P-,'e- /9t $1f.00 Waive Fee A. Submittal Requiremepts ❑ Site plan or latest approved p t showing, to scale, the proposed I ation of the sign(s) with dimensions. ❑ Distance from the sign to the p perty lines and/or edge of the DOT right-of-way. ❑ If the sign will be located in an a ement, a letter of approv from the easement holder will be required. ❑ A to -scale color illustration of the pro osed sign ❑ Dimensions of the sign, including o rall he. size, etc. (Be sure to also include these di ensiof ❑ Proposed lettering and/or graphics in th it ❑ Entrance Corridor Requirements: If the sign illustration of the front and side elevations of e $ 0.00 5-om the ground; cabinet size, length, width and depth; base the diagrams provided in the Sign Permit Application packet.) sed location. to be constructed in an Entrance Corridor, also provide a color Sign showing: o If internally illuminated, indicate which reas o the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have o que back ounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color f an opaque aterial cannot be detected nor can objects be seen through it.) o Identification of proposed materia and colors. Incl e standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, tex , graphics, base, face trim caps, returns, etc. o Provide accurate physical samples of all colors proposed, referably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around th&sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS ❑ A drawing, to scale, showing dimensions of the sign (length, height, depth). ❑ Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ❑ The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B.) ❑ Sign lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: Indication of sign ty e (channel loars, cabinet, panel, etc.). o Indicate on the drawings the proposed materials a d e r . Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all in text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: 7 - 57- I d - I :� 43011-Vu1 lriereA)