The URL can be used to link to this page

Home My WebLink AboutARB201900018 Checklist 2019-02-19 0 CO ARB COMPREHENSIVE SIGN REVIEW APPROVED CONDITIONS PROJECT#/NAME: Timberwood Commons TAX MAP/PRACEL#: Tax Map 32, Parcel 41D1 SIGN FEATURE APPROVED CONDITION N TES N SIGN TYPE Channel letters v e GC) I( LETTER FACE COLOR ' White V Y> TRIM CAP COLOR/RETURN COLOR White—trim cap &returns k pl RACEWAY COLOR i11 � To match wall color U GRAPHICS COLORS Multiple colors allowed. Total '!�'^� a�Zyi ✓� number limited to three per sign,, / 4- plus black and white,with colorsV 74 ci 5 S 1 resulting in an overall coordinated �� `` a..earance throut out the building. 57 SIZE LIMITATIONS Letters:proportional to the sign area p p rt M .( _ (see Sign Guidelines Appendix A.A / ,- /� `� and guidelines 4.d&9.d) a��Y''"` tti(��.�-C LOCATION(S) South building,north elevation; and north Centered horizontally in brick building,northwest Mi gA40/61 facades as shown on plan elevation not visible from I ..—_.____=:_) Entrance Corridor and not subject to ARB review. G_ / ' LOGO/GRAPHICS DETAILS A3.4�- As per ARB guidelines � � ILLUMINATION DETAILS Internal illumination of letters allowed(LED as noted). Internal illumination of graphics allowed if the graphic is fully integrated with elude LED note on sign the composition of the lettering and drawings(see below). the overall sign, and if the scale of the graphic is less than that of the du4a lettering. MATERIALS Acrylic and aluminum The required LED note is: The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. This form outlines the specific design criteria established for signs at this location. All standard ARB sign guidelines also apply. Updated 3/30/2017 Completeness Check for Signs Z fq f - CO ( 6ti4loyOrProject#/Name: = S J,� Date Received at County: 4110 y Date Received in Design Plannipg: RN/%Zia/ - Date of Checklist Check: -1 )-42/ '7 Assigned to/Date: FEES 3. ARB Review- Will the permanent sign(s)be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages.) ) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages.) _ ❑ No (This sign will not be constructed in an Entrance Corridor) $0.00 FEE TOTAL(Please add all the amounts checked in sections 1-3): $ FREESTANDING SIGNS A. Submittal Retirements ❑ Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way. ❑ If the sign will be located in an easement,a letter of approval from the ease nt holder will be required. ❑ A to-scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the-ground;cabinet size,length,width and depth;base size,etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is tole constructed in an Entrance Corridor,also provide a color illustration of the front and side elevations of tlsign showing: o If internally illuminated,indicate which,afeas of the sign are opaque and which are illuminated.Internally illuminated cabinet signs must have ..ague backgro ids.(Opaque materials don't allow light to pass through. When lit only from behind,the co •r of an opaque mate 'al cannot be detected nor can objects be seen through it.) o Identification of proposed ma • ials and colors. Include st. 'dard color id numbers(Pantone,Benjamin Moore, Acrylic,etc.)for all materi. ,text,graphics,base,faces,trim ••is,returns,etc. o Provide accurate physic samples of all colors proposed,prefera i in the material proposed.(Paint chips that accurately reflect the .roposed colors are acceptable.) o Provide a site pla, showing proposed landscaping around the sign,incl sing botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The applicant will be notified if this requirement applies.) WALL SIGNS I v v A drawing,toscale,showing di sions of the sign(length,height,depth). Ele on drawing(s)or modified photograph of the a t' uilding,to scale and in color, .,� The sign liarfion on the building,signilfe t above grade,and the length of�ii lding frontage.(Be sure to also include these dimensions on the diagrams provided in Appendix B) p❑ Sign leling and/or graphicsahi s in their proposed location. Lj 3 Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color V-' illustration of the front and side elevations of the sign showing: Indication of sign type(channel letters,cabinet,panel,etc.). Indicate on the drawings the proposed mat als and colors. Include standard color identification numbers (Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps,etc.For channel letter signs,indicate on the drawing that the race, way color shall match the color of the wall to which the raceway is attached. J,,{�� oProvide accurate physical s mp bf all-Eolors proposed in the sign,preferably in the material proposed.(Paint chips that accurately reflect e proposed colors are acceptable.) Location of proposed light fixtures and manufacturer cut sheets describing illumination type,intensity,style, Lo Xshielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17. o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated.(Opaque materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS -1t1 Th location of proposed light fixtures identified on a plan and/or elevation / Manufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: