HomeMy WebLinkAboutARB201800070 Checklist 2018-05-11 0
Completeness Check for Signs
Project#/Name: pe 6 I E 'Z Atka ;41 4
Date Received at County:
Date Received in Design Planning:
Date of Checklist Check: Assigned to/Date:
FEES
3. ARB Review- Will the permanent sign(s)be constructed in an Entrance Corridor? ,A
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) % '
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00
Comprehensive Sign Review. See ARB requirements next pages.) ++ - i
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked in sections 1-3): $
FREESTANDING SIGNS
. A. Submittal Requirements
Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. ✓ `�
-•jDistance from the sign to the property lines and/or edge of the VDOT right-of-way.
..J2' If the sign will be located in an easement,a letter of approval from the easement holder will be require
❑ A to-scal o or illustration of the proposed sign showing
❑ DimeoluSs of the sign,including overall height from the ground;cabinet size,length,width and depth;base
size,etc. (Be sure� to-also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
❑ Proposed lette»rng and/or grir15<in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor,also provide a color
illustration of the front and side elevations of the sign showin ••
co) If internally illuminated, indicate which areas of the si are opaque d which are illuminated.Internally
........" illuminated cabinet signs must have opaque backgrounds. terials don't allow light to pass through.
When lit only from behind,the color of an o aque material cannot be detected nor can objects be seen through it.)
o Identification of proposed ma rats and of .Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for all materials,text,graphics, e,faces,trim caps,returns,etc.
o Provide accurate physical sanikles of all colors oposed,preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are accept le. ..e.it S TS
o Provide a site plan showing propose landsc g around the sign,including botanical names and planting sizes.
o Additional submittal materials may b requir if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requ• eme applies.)
3&30-3 3/ d
et„rd /7I 7
I
7
WALL SIGNS a . WZ
42j-e4 'vow—
A drawing,to scale,showing dimensions of the sign(length,height,depth).
❑ Elevation drawing(s)or modified photograph of the entire building,to scale and in color,showing
❑ The sign location on the building,sign height above grade,and the length of building frontage. (Be sure to also
include these dimensions on the diagrams provided in Appendix B)
❑ Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an E • .' ce Corridor also provide a color
illustration of the front and side elevations of the sign showing:
o Indication of sign type(channel letters,cabinet,panel,etc .
o Indicate on the drawings the proposed materials .• colors. Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic,etc.)for . materials,text,graphics,faces,trim caps,etc.For channel letter
signs,indicate on the drawing that the ra$eW`ay color shall match the color of the wall to which the raceway is
attached.
o Provide accurate physical samples of all colors proposed in the sign,preferably in the material proposed.(Paint
chips that accurately reflec a proposed colors are acceptable.)
o Location of propose 11(ht fixtures and manufacturer cut sheets describing illumination type, intensity,style,
shielding,color,a,. height.All lighting must meet ordinance requirements as outlined in Section 4.17.
o For internall luminated signs,indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials •.n't allow light to pass through. When lit only from behind,the color of an opaque material cannot be
detected or can objects be seen through it.)
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures identified on a plan and/or elevation
❑ Manufacturer cut sheets describing illumination type, intensity,style,shielding,color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: