HomeMy WebLinkAboutARB201800042 Checklist 2018-03-28 ARB2018-42: Kelly Services wall sign HNM 3/28/18
•
REF CHECKLIST ITEM NOTES
9.iv Cabinet signs shall have a non-illuminated background, or an OK: cabinet is aluminum + opaque
opaque(zero light transmission)background.
Cabinet signs shall be constructed such that no light spills OK: cabinet is aluminum - opaque
outward from the top,bottom, sides or back.
5.g All illumination shall be non-blinking. OK
5.h An exposed light source that forms the body of a sign, (such N/A
as exposed neon signs), shall not be used in the Entrance
Corridors.
ARB ACTIONS
If LED lighting is proposed the sign drawing must state The OK: not initialed on template
level of illumination provided by the LED lights will not
exceed the illumination produced by a single stroke of30
milliamp (ma) neon.
Action on ARB-P (BP)2001-12 Red acrylic#2283 has been determined N/A: no color red proposed
Wood Grill to be an inappropriate color for signs.
Pantone color match for 2283 is 485C.
Red#2793 has been approved as an
acceptable substitute. Pantone color
match for 2793 is 187C. (See below.)
12/21/15 action on ARB 2015-114 &- Generally, for signs in the
115 Shell Signs Entrance Corridors, red 485
may be acceptable on a case-
by-case basis as a secondary
color.
ARB Action Memo: 5/7/12 Visual clutter resulting from adjacency, for OK
example at the Hardee's locations, is a
reasonable basis for not allowing
illumination of the graphic.
ARB Action Memo: 8/3/15 Accent color letters can be used in a sign N/A: no accent colors proposed
when portrayed as a graphic,up to 33% of
the length of the sign.
4
ARB2018-42: Kelly Services wall sign HNM 3/28/18
REF CHECKLIST ITEM NOTES
An outline width of 1/8" has been found to be an appropriate
sign dimension.
TRADEMARKS, CORPORATE LOGOS AND GRAPHICS
4.f 'The ARB may require that the color and scale of standard N/A: none proposed
templates for trademarks, service marks, corporate logos and
graphics be modified.
When used,trademarks, service marks, corporate logos and/or N/A: none proposed
graphics should be incorporated as an integral part of the
overall sign.
La External (or no) illumination is preferred for approved N/A: no external illumination proposed
graphics/logos;
5.b internal illumination may be considered for approval on a OK: internal illumination proposed
case-by-case basis.
LIGHTING
9.e.i External (or no) illumination is preferred for wall signs. N/A: no external illumination proposed
5.f Any internal illumination is considered to contribute to visual OK: internal illumination proposed
clutter and will be limited.
5.c Internal illumination design approval will be evaluated on OK: intemal.illumination proposed
size, balance, complexity, and distance from the Entrance
Corridor.
9.e.iv The backgrounds of such cabinet signs must be made opaque OK: channel letters are aluminum -* opaque
(zero light transmission).
5.e External illumination should be shielded and not create glare. N/A: no external illumination proposed
All external light sources shall be white. N/A: no external illumination proposed
9.11 Sign lighting (external) should be shielded so that it N/A: no external illumination proposed
illuminates only face of the sign and does not shine beyond
the edge of the sign.
9.iii Channel letters with translucent faces must have no light OK: channel letters are aluminum -) opaque
spilling outward from the top,bottom, sides or back.
Faces and returns of channel letters shall be opaque when N/A: halo-lighting not proposed
back-lit(halo-lit).
3
=e ,
ARB2018-42: Kelly Services wall sign HNM 3/28/18
REF CHECKLIST ITEM NOTES
Appendix Color, form, surface pattern, shape, and disposition of 4"break between the two elements),in'a 48"tall sign band.
A.A.4 elements and openings in an architectural design can affect That leaves 4.5" clearance between the sign and the top/bottom
our perception of scale and can impact the appearance of a of the sign band.
sign on a building.
9.d The wall sign's size must coordinate with the architectural OK: as per CSP, signs shall be centered vertically in sign band
element's size. area, which this is. Also centered horizontally
The sign should not over-crowd the architectural element, the
wall, or the sign area.
Buildings and building elements should not be used as OK
billboards.
9.a Wall signs must integrate with the building's architecture. OK
The sign placement should not obscure architectural features OK
or details, (such as cornices, windows, columns, pilasters and
paneling).
9.d An appropriate height for channel letters in a 30" high sign OK
band is 18".
This allows 6" of unoccupied space above and below the OK: Although the height of the channel letters and the height
letters. of the cabinet are not given, the total assemblage=39" (with a
4" of clear space above,-below, and to the sides of a channel 4"break between the two elements), in a 48"tall sign band.
letter sign is considered a minimum, with larger clearances That leaves 4.5" clearance between the sign and the top/bottom
required for larger sign bands. of the sign band.
Degree of visibility, the distance from the Entrance Corridor, OK
and the architectural design of the building/area will
determine sign size,placement, and proportions.
4.d Lettering should be in proportion (font size and typeface OK
style) to the sign and the building.
Use of three typefaces or less. OK: 2 typefaces proposed
Additional typefaces may be approved if they contribute to a
balanced/legible/unified sign design.
9.e.iv The width of the outline must be in proportion to the width of N/A
the letter.
2
- ARB2018-42: Kelly Services wall sign HNM 3/28/18
SIGN REVIEW CHECKLIST with REFERENCES—Wall Sign, Single Business
REF CHECKLIST ITEM NOTES
TYPE
9.b For internally illuminated signs, channel lettering (mounted OK: illuminated channel letters proposed as primary signage
on a raceway or individual letters) is preferred to cabinet
signs.
5.b When channel letters cannot be adequately accommodated, OK: a cabinet sign also proposed as secondary; compliant with
internally illuminated cabinet signs may be considered. CSP
6 Reader boards are discouraged. N/A
MATERIALS
4.c Materials used in the sign should complement the building OK: aluminum with acrylic faces
being served by the sign.
COLOR
4.e Color for raceway-mounted channel letters, the raceway shall OK: no raceway color given,but note that color of the raceway
match the wall color. must match the color of the wall (MAKE A CONDITION)
Sign colors must be harmonious with each other. OK: white acrylic faces +white cabinet with black lettering
Sign colors must not clash with the site, when viewed in
daylight and at night.
Overly intense color, (such as dayglo or fluorescent colors),
are prohibited.
Use of three colors or less (black and white considered as OK: two colors proposed (black and white); question about
colors) whether this is compliant with the CSP,which says only"Red
Additional colors maybe approved if they contribute to the =PMS 187, white" and"No third color as of 7/19/014". Black
sign balance/unity. would be considered a third color,but it was approved on the
Which Wich cabinet sign in 2011. Also, given location,
visibility will be minimal from the EC...
SIZE, SCALE, PROPORTION,AND LOCATION
4.6 Signs may not exceed the size, height and setback OK
requirements as outlined in Section 4.15 of the Albemarle
County Zoning Ordinance(unless sign has a variance).
Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall area OK: Although the height of the channel letters and the height
A.A is a good working proportioning system for placing a sign. of the cabinet are not given, the total assemblage= 39" (with a
1
ARB COMPR ,NSIVE SIGN REVIEW APPROVE DNDITIONS
PROJECT#/NAME: Hollymead Town Center—Area B
TAX MAP/PARCEL#: Tax Map 32,Parcel 43,42B,42C,42D,42E,43A
SIGN FEATURE APPROVED CONDITION NOJES
SIGN TYPE x/cabinet signs considered only as
Channel letters secondary signs(with opaque
backgrounds)
LETTER FACE COLOR Red=P 187(gxcept Target,Red=PMS No third color as of 7/19/04. See note
186 ite 1,below. +317-c k j to trd co-lew
TRIM CAP COLOR/RETURN Bronze o ✓ Limit to a single color throughout the
COLOR _'_ center.
RACEWAY COLOR To match wall surface behind < C{
CABINET FACE COLORS N/A fox signs'aitly approved as secoryiary
signs with opaque background
SIZE LIMITATIONS Signs shall be mounted within sign band area {e a.•v� •g i�ht_
specified on ARB approved drawings. Signs
shall not extend beyond designated sign band
area. Window signs limited to 9sf/building
frontage.
LOCATION(S) Signs shall be centered vertically within sign 0 ve-ez. I vt 6yi
band. All sign bands shall be contained within
a single material/color. Sign bands shall be -
coordinated with the architecture of the See notes 2 and 3,below.
building. Buildings G and H shall have no
window signs visible from the Entrance
Corridor.
MOUNTING DETAILS At least 4"of clear space shall be provided q"S l ki Ltd' i n �$
above and below each sign,within the single 1 x = l Mau y . `�U • Ana.
material/color. r
LOGO/GRAPHICS DETAILS Logos/graphics visible from Route 29 may not Symmetry must be maintained with
be illuminated(with the exception of the signs Target bullseyes on Entrance Corn;/
approved for Target). side.See note 4,below. V
ILLUMINATION DETAILS No illumination of window signs visible from Logos/graphics visible from Route 29
29. Internal white neon for channel letters.*** may not be illuminated. /.fp
TEXT N/A U f
LETTER TYPE/FONT Not specified,see guidelines. p /�
MATERIALS Not specified,see guidelines. p
This form outlines the specific design criteria established for signs at this location.
All standard ARB Sign Guidelines also apply.
NOTES:
1. One sign color permitted per building grouping. Building grouping:B&C,G&H,F. Buildings D,E,and K may
have both red and white sign faces as of 7/19/2004. (B&C have wh to faces. F has white faces. G&H have red faces.)
2. To-scale drawings are required with building permits to confirm sizes and locations.
3. No window signs on Entrance Corridor side of TGI Fridays(9/7/2004 ARB Review).
4. For out-parcel H,logos are limited to the west side of the building.
***At its October 6,2014 meeting,it was the consensus of the ARB that neon could be replaced with LED lights in all
previously approved Comprehensive Sign Criteria.
FREESTANDING SIGN—TENANT PANELS
ARB 2003-167
1. The sign shall be externally illuminated.
2. Tenant panel background color shall be white and lettering shall be red.
All standard ARB Sign Guidelines also apply.
ni
f
IT::- .•AIWHOR ' nn e 612nsrrtrm�rnriitimY itmt- — t 7 :f
�1 `+ • f i7., �1 ,Ui�#iill!u �Jliill.#i##IJQIII#)�j�111iili{igi�iu e 1-� iif' ..s:. 4�
1 �n; ".:iI�1�1ii
ii , - - ; ¢N#l#ftilhplplfi!}H ;#N{#iin.NNf}Nu :it,
1
.fBl
a t m. i ij rtrf(tltfiuCl+ir'•—nni +nYn fi a751rt _
_ ( � I c U TIFiin ninn'nznmwiu u •
I h#NlgN1l#tAN#lillillillNi1111011111 ° TC�'`1H�y 77�� r,<
Sri Et r' , i r:- d �Vl l�.lt , t.r '.
:- ` �' p lilibilil#1Hi#N(li#C I llllliHliMR t A. r,
m-m?m r 1lHl#UfMhwinnnHHND 1 y",
" I "". ' s ri WMMIHH WHiuQiIR1 I L. '
rr t
i
K. EY P LAN _ „
S.0 A L,E: N.TS..
Completeness Check for Signs
Project it/Name: ARB2018-42:Kelly Services wall sign
Date Received at County:_3/23/18
•
Date Received in Design Planning:_3/27/18
Date of Checklist Check:_3/28/18 Assigned to/Date:_HNM 3/27/18
•
FEES
3. ARB Review—Will the permanentsign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00
Comprehensive Sign Review.See ARB requirements next pages.)
® Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review.See ARB requirements next pages.)
❑ No (This sign will not be committed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked in sections I—3): •
$
WALL SIGNS
® A drawing,to scale,showing dimensions of the sign(length,height,bep)1d. --,�..-- Commented[HMI]:Profile shown but depth dimension not
given
Z Elevation drawing(s)or modified photograph of the entire building,to scale and in color,showing
® The sign location on the building,'sign height abovi grad_el and the length of building frontage.(Be sure to also -.—{Commented[NM2]:Not provided
include these dimensions on the diagrams provided in Appendix B.)
® Sign lettering and/or graphics in their proposed location.
® Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
o Indication of sign type(channel letters,cabinet,panel,etc.).
o Indicate on the drawings the proposed materials and colors.Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps,etc.For channel letter
signs,indicate on the drawing that the acewaylcolor shall match the color of the wall to which the raceway is --{Commented[BM3]:.Color not provided
attached.
o Provide accurate physical'sample4 of all colorsgroposed in the sign preferably in the materialproposed.(Paint ..--{commented[MM4]:Not provided
chips that accurately reflect the proposed colors are acceptable.)
•
o Location of proposed light fixtures and manufacturer cut sheets describing illumination type,intensity,style,
shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
o For internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated.(Opaque
materials don't allow light to pass through.When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures identified on a plan and/or elevation ,I
❑,Manufacturer cut sheets describing illumination type intensity,style,shielding,color,and height.All lighting must ! —{Commented[HM5):Not provided _ J
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
If �
•
•
NOTES:
•
Application is sufficient
•
•
•
•
•
1
•