HomeMy WebLinkAboutARB201700058 Checklist 2017-06-12 Completeness Check for`5igns
Project#/Name: PfIV I-7- STD g axuev Jo yob Sk k )
Date Received at County: (o l 7 /1
Date Received in Design Planning:
Date of Checklist Check: (4)f( L t 1 -7 Assigned to/Date:
FEES t 0 ' ct �2..-sue r.2.. 4« ';y - .'"�.•z ,4 t,- <-r ic. 4..
3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00
Comprehensive Sign Review. See ARB requirements next pages.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL (Please add all the amounts checked in sections 1—3): $
FREESTANDING SIGNS
. Submittal Requirements
ite plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. e '4 (A)C i
istance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ he sign will be located in an easement,a letter of approval from the easement holder will be required.
A to-scale color illustration of the proposed sign showing
Dimensions of the sign, including overall height from the ground;cabinet size, length, width and depth;base
si etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
VProposed lettering and/or graphics in their proposed location. 1
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor,also provide a or
illustration of the front and side elevations of the sign showing:
L.o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque backgrounds.(Opaque materials don't allow light to pass through.
(AS'" When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.)
oo Identification of proposed materials and colors. Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for all materials,text,graphics,base,faces,trim caps,returns, etc.
3 t
7t4E` �(� Provide accurate physical samples of all colors proposed,preferably in the material proposed. (Paint chips that
'•,,---- accurately reflect the proposed colors are acceptable.)
,• � `Provide a siteplan showingproposed landscaping around the sign, including botanical names and plantingsizes.
c: P P P. g
__)
o Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The
applicant will be notified if this requirement applies.)
)141•11 — . — i '
WALL SIGNS
❑ A drawing,to scale,showing dim• sions of the sign(length,height,depth).
❑ Elevation drawing(s)or modified ph. ograph of the entire building,to scale and in color,showing
❑ The sign location on the building, 'gn height above grade,and the length of building frontage.(Be sure to also
include these dimensions on the dia•ra ,s provided in Appendix B)
❑ Sign lettering and/or graphics in thei proposed location.
❑ Entrance Corridor Requirements: If the s . is to be .nstructed in an Entrance Corridor also provide a color
illustration of the front and side elevations oft e si: owing:
o Indication of sign type(channel letters,ca.', et,panel,etc.).
o Indicate on the drawings the proposed ateria . and colors.Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic' etc.)for all •aterials,text,graphics,faces,trim caps,etc.For channel letter
signs,indicate on the drawing that the raceway co .r shall match the color of the wall to which the raceway is
attached.
o Provide accurate physical samples of all colors propose• in the sign,preferably in the material proposed.(Paint
chips that accuratejy reflect the proposed colors are accep •ble.)
o Location of proposed light fixtures and manufacturer cut she is describing illumination type, intensity,style,
shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
o For' ernally illuminated signs,indicate which areas of the sign are opaque and which are illuminated. (Opaque
erials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be
tected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
IREMENTS Q
e location of proposed light fixtures identified on a plan and/or elevation
Manufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height.All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: