HomeMy WebLinkAboutARB201700059 Checklist 2017-06-12 Completeness Check fore=Signs
1 (ini CS /"..2
Project#/Name: g- /7 " ej/t c g1c 4 ( 5
Date Received at County: /-/1 767
Date Received in Design Planning:
Date of Checklist Check: 6,// v// 7 Assigned to/Date: ,4i r./4
FEES t 1s ' ;i. _ ,
,,
( _J> _- ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00
Comprehensive Sign Review. See ARB requirements next pages.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked in sections 1—3): $
FREESTANDING SIGNS
A. ubmittal Requirements
0110ite plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. ,t`/ l_ > L
i. Distance from the sign to the property lines and/or edge of the VDOT right-of-way. �'"'
LiErIf the sign will be located in an easement,a letter of approval from the easement holder will be required.
St6K IS -..ettt CrS
��Q`A to-scale c5.or illustration of the proposed sign showing e,i/Sli rt
'Dim sions of the sign, including overall height fro the ground;ca t size,length,
bmth,width and de th;base
size,etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
Xi Proposed lettering and/or graphics in their proposed location. 1
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor,also provide co ar" for
illustration of the front and side elevations of the sign showing:
k If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque backgrounds.(Opaque materials don't allow light to pass through.
When lit only from behind,the co r of an opaque material cannot be detected nor can objects be seen through it.)
identification of proposed rials and colors.Include standard color id numbers(Pantone,Benjamin More,
Acrylic,etc.)for all materials,text,graphics,base,faces,trim caps,returns,etc. l4tn c// a At. AM rW ) / /bl S Z..; 3c./C
�,-6` Provide accurate physical samples of all colors proposed,preferably in the mat r'al proposed.(Paint chips that
accurately reflect the proposed colors are acceptable.) t` A d yP
Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. C>,./„O./
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
400
WALL SIGNS
AffA drawing,to scale,showing dimensions of the sign(length,height,depth).
elevation drawing(s)or modified ph t raph of thee building,toQand in c'Slor,showing
The sign 1 ation on the building,sign 1ht above grade,and the 1ief of building frontage.(Be sure to also
include these dimensions on the diagrams provided in Appendix B)
] Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Indication of sign type(channel le ,cabinet,panel,etc.).
Indicate on the drawings the proposed m* rt'als and coltedsi Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps, etc.For channel letter
signs,indicate on the drawing that the ra y color shall match the color of the wall to which the raceway is
attached.
e.06- Provide accurate physical samples of all colors proposed in the sign?preferably in the material proposed.(Paint
i/' chips that accurately reflect the proposed colors are acceptable.) el-tAXd /.
t iKLocation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity,style,
shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
(,Jcl or internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated.(Opaque
�`' materials don't allow light to pass through.When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
t]Ir''I'he location of proposed light fixtures identified on a plan and/or elevation
1, "Manufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: