The URL can be used to link to this page

Home My WebLink AboutARB201900049 Checklist 2019-04-26ARB2019-49: Burn Boot Camp tenant panel refacing (2) HNM 4/26/19 SIGN REVIEW CHECKLIST WITH REFERENCES — Freestanding Signs REF CHECKLIST ITEM TYPE 8.a Monument signs are preferred to pole -mounted signs. Pole signs may be considered if existing site conditions rule out the ability to use a monument sign, and only when the Dole is in Dronortion to the sign cabinet or nanel. MATERIALS 8.b Materials used in both the sign and support structures should be complementary. They should also support the aesthetics of the building/complex being served by the sign. 8.b It is preferred that the base material match one of the primary building materials unless the sign design represents itself as a freestanding element comDlementina the buildine. COLORS 4.e Colors must be harmonious with each other. Colors must not clash with other elements on the site, both when viewed in davlieht and at niaht. Overly intense color, (such as dayglo or fluorescent colors), are pronionea. Use of three colors or less Black and white are colors. Additional colors may be approved if they contribute to a balanced/unified sign design. 9.c For raceway -mounted channel letters, raceways shall match the wall color. LANDSCAPING 8.d Use ground cover, shrubs and/or trees to integrate freestanding signs into the overall site landscape. NOTES OK: the existing freestanding sign is a monument sign; this application is for refacing the tenant panels on an existing monument sign OK: the proposed material is applied vinyl. OK: black is proposed as the background, which complies with the CSP for TMP45-110; text and logo are white, which also complies with the CSP OK: no accent colors proposed OK: two colors proposed (black and white) N/A: no raceway -mounted channel letters proposed N/A: this request is for a tenant panel refacing on existing monument signs; therefore, additional 1 ARB2019-49: Burn Boot Camp tenant panel refacing (2) HNM 4/26/19 REF CHECKLIST ITEM NOTES Use plants from the Albemarle County Recommended Plants landscaping to what is present already is not required. List. SCALE AND SIZE 4.b Signs may not exceed the size, height and setback N/A: the existing monument sign and the tenant panels requirements as outlined in Section 4.15 of the Albemarle are pre-existing and have been previously approved for County Zoning Ordinance (unless the sign has received a size. variance). 8.c The structure of a monument sign shall not overwhelm the OK sign. The structure and the sign that it supports must be in proportion to each other. SIGN LETTERING AND TYPEFACE 4.d Lettering should be in proportion (font size and typeface OK style) to the sign and the building. Use of three typefaces or less. OK: 1 typeface proposed Additional typefaces may be approved if they contribute to a balanced, legible, unified sign design. 8.e.iv If outlines of letters are proposed, the outline width must be N/A: no outlines proposed in proportion to the letter width. An outline width of 1/8" is the appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS, AND GRAPHICS 4.f The ARB may require that the color and scale of standard OK: the logo is appropriately scaled and the color is templates for trademarks, service marks, corporate logos and white, which complies with the CSP for TMP 45-110 graphics be modified. When used, trademarks, service marks, corporate logos and/or graphics should be incorporated as an integral part of the overall sign. LIGHTING 8.e.i External illumination (or no illumination) is preferred for N/A: no external illumination proposed. freestanding signs. ARB2019-49: Burn Boot Camp tenant panel refacing (2) HNM 4/26/19 REF CHECKLIST ITEM NOTES S.f Any internal illumination is considered to contribute to visual N/A: no internal illumination proposed; internal clutter and will be limited. illumination is pre-existing The design will be evaluated for size, balance, complexity, and distance from and relationship to the Entrance Corridor. 5.e External Illumination should be shielded and not create glare. N/A: no external illumination proposed. Lighting should be aimed so as not to project illumination beyond the sign. All external light sources shall be white. 8.e.ii Ground mounted lighting should be shielded by landscaping N/A: no external illumination proposed. so that it is not visible from any adjacent property or right-of- way. 5.h An exposed light source that forms the body of a sign, (such N/A as exposed neon signs), shall not be used. S.g All illumination shall be non -blinking. OK S.c External illumination (or no illumination) is preferred for N/A: no external illumination proposed. approved graphics/logos; internal illumination may be considered for approval. N/A: no internal illumination proposed; internal illumination ispre-existing 8.e.iv Cabinet signs shall have a non -illuminated background, or an N/A: no internal illumination proposed; internal opaque (zero light transmission) background. illumination is pre-existing. This is a pre-existing cabinet sign/tenant panel refacing Cabinet signs shall be constructed such that no light spills outward from the top, bottom, sides or back. 8.e.iii Channel letters (although not likely appropriate for N/A: no internally illuminated channel letters proposed freestanding signs) with translucent faces shall be constructed such that no light spills outward from the top, bottom, sides or back. If back -lit (halo -lit), the faces and returns of channel letters N/A: no back-lit/halo-lit signs proposed. shall be opaque. ARB ACTIONS ARB2019-49: Burn Boot Camp tenant panel refacing (2) HNM 4/26/19 REF CHECKLIST ITEM NOTES (ARB Billboards are inappropriate for the Entrance Corridors. N/A: the size is appropriate and is not a billboard Action No refacing design (no combination of colors, images, text Memo: 1/19/10) and layout) will make the billboard an appropriate appearance. Existing billboards may not increase in size and may not include modifications beyond the existing sign surface. No new illumination of any kind may be added to the billboard. (ARB Reader boards shall have an opaque background. Only the N/A: no reader boards proposed. Action letters may be illuminated, but illumination is not required. Reader boards shall not exceed 40% of the size of the overall Memo: 1/19/10) sign face. The background color of the reader board shall be black or some other color already on the sign face. Construction of the reader board shall be integral with the main sign. The track holding the letters shall have minimal visual impact. (ARB Synthetic stucco is acceptable for signs if mounted on a solid N/A Action surface such as concrete block and if limited to use as a flat Memo: surface as a background for lettering. 5/4/09) Styrofoam backing is not acceptable. N/A Action on ARB- Red acrylic #2283 has been determined to be an OK: no color red proposed P(BP)-2001-12 inappropriate color for signs. Wood Grill Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. See below. 12/21/15 action on Generally, for signs in the Entrance Corridors, red 485 ARB 2015-114 & - may be acceptable on a case -by -case basis as a secondary 115 Shell Signs color. ARB2019-49: Burn Boot Camp tenant panel refacing (2) HNM 4/26/19 REF CHECKLIST ITEM NOTES (ARB Scale, location, proximity to existing building(s), quality of OK. Action sign materials, and sign height and other pre-existing Memo: conditions determine how much planting is required at the 10/5/09) base of the freestanding sign. If LED lighting is proposed the sign drawing must state The N/A: no illumination proposed; internal illumination is level of illumination provided by the LED lights will not pre-existing exceed the illumination produced by a single stroke of 30 milliam ma neon. Internal LED for the gas pricing: Daytime intensity limited to N/A 70% of maximum intensity; Nighttime intensity limited to 16% of maximum intensity with automatic dimming at dusk. ARB Action Visual clutter resulting from adjacency, for example at the OK Memo: 5/7/12 Hardee's locations, is a reasonable basis for not allowing illumination of the graphic. ARB COMPREHENSIVE SIGN REVIEW APPROVED CONDITIONS NORTHTOWN CENTER FREESTANDING SIGN - TENANT PANELS (ARB 2013-88) TAX MAP/PARCEL#: Tax Map 45, Parcel 110 SIGN FEATURE APPROVED CONDITION SIGN TYPE Freestanding Sign - Tenant Panel OK TENANT PANEL GRAPHICS Permitted, as per ARB Guidelines OK TENANT PANEL • Green: PMS 343; Red: PMS 188; Yellow: PMS 122; Black or White. BACKGROUND COLORS . Only one background color per panel OK: black background • No two tenant panels adjacent to each other shall have the same background color TENANT PANEL TEXT OK: white text COLOR White TENANT PANEL GRAPHIC Green: PMS 343; Red: PMS 188; Yellow: PMS 122; Black or White. COLORS OK: white logo TENANT PANEL ILLUMINATION DETAILS Internal fluorescent, only the text and graphics shall illuminate OK: background opaque All standard ARB Sign Guidelines also apply. Completeness Check for Signs Project #/Name: _ARB2019-49: Burn Boot Camp tenant panel refacing Date Received at County: HANAL'] Date Received in Design Planning: _4/19/19. Date of Checklist Check: _4/26/19 Assigned to/Date: _HNM 4/19/19, FEES 3. ARB Review —Will the permanent signs) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions ofa $129.00 Comprehensive Sign Review. See ARB requirements nextpages) ® Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions ofa Waive Fee Comprehensive Sign Review. See ARB requirements next pages) ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3) FREESTANDING SIGNS A. Submittal Requirements Ell Site plan or latest approved plat showing, to scale the proposed location of the sign(s) with dimensions. ❑l Distance from the sign to the property lines and/or edge of the VDOT right-of-way. Ell If the sign will be located in an easement, a letter of approval from the easement holder will be required. ® A to -scale color illustration of the proposed sign showing l❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ® Proposed lettering and/or graphics in their proposed location. ® Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) o Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. o Provide accurate physical kamplesl of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscapin around the sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) NOTES: Sufficient Commented [HMI]: N/A: tenant panel refacing on existing monument sign Commented [HM2]: N/A: tenant panel refacing on existing monument sign Commented [HM3]: N/A: tenant panel refacing on existing monument sign Commented [HM4]: Not provided Commented [HM5]: Not provided _...... � Commented [HM61: N/A: tenant panel refacing on existing monument sign