HomeMy WebLinkAboutARB201700122 Application 2017-11-06 (3) Niwro
Part C: Submittal Items Required
Note:Submittal packages must contain 4 collated copies of all information unless otherwise indicated. Additional submittal
materials may be required if review by the Architectural Review Board is necessary. Applicants will be notified if additional
materials or ARB review are required.
SECTION 1: FREESTANDING, SUBDIVISION OR DIRECTORY SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ A footing/foundation diagram showing how the base or pole will be anchored in the ground.
❑ If the sign will be located in an easement,a letter of approval from the easement holder will be required.
Q A to-scale color illustration of the proposed sign showing
❑ Dimensions of the sign,including overall height from the ground;cabinet size,length,width and depth;base
size,etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
❑ Proposed lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor,also provide a color
illustration of the front and side elevations of the sign showing:
o If internally illuminated,indicate which areas of the sign are opaque and which are illuminated.Internally
illuminated cabinet signs must have opaque backgrounds.(Opaque materials don't allow light to pass through.
When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of proposed materials and colors. Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for all materials,text,graphics,base,faces,trim caps,returns,etc.
o Provide accurate physical samples of all colors proposed,preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign,including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
B. Inspection Requirements for Freestanding, Subdivision or Directory Signs
❑ Applicant must mark the location of the property lines and the location of the sign with stakes in preparation for a
preliminary zoning inspection. (All four corners of the sign must be marked with stakes that are easily visible to all
inspectors.)
❑ A preliminary zoning inspection must be completed to verify the location of the sign before the permit can be
issued.
❑ Freestanding signs are required to have footing inspections. (scheduled by applicant)
❑ Freestanding signs are required to have electrical inspections if illuminated. (scheduled by applicant)
❑ Freestanding signs are required to have final building and zoning inspections. (scheduled by applicant)
11/1/2015 Page 2 of4
. ...
No 10`
%MO