HomeMy WebLinkAboutZMA197800008 Approval - County 1978-06-21ROBERT W. TUCKER, JR.
DIRECTOR OF PLANNING
a
)..A
Or AL�`�M
Planning Department
(804)296-5823
414EASTMARKETS REET
CHA,RLOTTESVILLE, VIRGINIA 22901
June 29, 1978
Messrs. Frank Kessler and J. W. Wright, Jr.
Real Estate III
Post Office Box 7000
Charlottesville, Virginia 22901
Dear Sirs:
RONALDS.KEELER
ASSISTANT DIRECTOR OF PLANNING
MARYJOY SCALA
SENIOR PLANNER.
CARLOS M. MONTENEGRO
PLANNER
Re: Board of Supervisors Action
Request for ZMA-78-08
This is to advise you that the Albemarle County Board of Supervisors at
its meeting June 21, 1978, approved your request for ZmA-78-08 ( County Tax Map
61, Parcels 198, 199, 200 and 201)subject to the following conditions:
1. No dwelling units are to be built on slopes of 25% or greater without
County Engineering Department approval of site work;
2. Water and sewer facilities to be approved by, and dedicated to, the Albemarle
County Service Authority;
3. County Engineering Department approval of private road specifications and
inspection to insure specifications are met;
4. County Attorney approval of maintenance agreement for common spaces,
recreational facilities and private roads;
5. Grading permit required prior to subdivision approval;
6. Dedication to Albemarle County of a 15-foot wide strip for future constuction
of a bicycle and pedestrian trail as shown on plan received September 12, 1977;
7. Uses in the flood plain of Meadow Creek shall comply to Article 9A of the Zoning
Ordinance;
8. Removal of cul-de-sac at Cottonwood Road and restoration of disturbed areas;
9. Wildwood Court and Cottonwood Road shall have street lights similar to those on the
existing Cottonwood Road;
10. All utilities are to be located underground;
11. Connection of roadways and sidewalks to Cottonwood !load as well as removal of the
existing cul-de-sac shall be done at the apolicant's expense;
12. Staff approval of tot lot location and equipment;
13. Raods to be constructed to Virginia Department of Highways standards as to width,
pavement depth and curve requirements.
Sincerely,
artmc11t