HomeMy WebLinkAboutWPO201900003 Review Comments WPO VSMP 2019-09-05COUNTY OF ALBEMARLE
Department of Community Development
401 McIntire Road, Room 227
Charlottesville, Virginia 22902-4596
Phone (434) 296-5832 Fax (434) 972-4126
VSMP Permit plan review
Project title: Pleasant Green Phase 1 — Burrow Area
Project file number: WP0201900003 — amendment 1
Plan preparer: Collins Engineering [scott@collins-engineering.com]
Owner or rep.: SM Charlottesville LLC
Plan received date: 02 Aug 2019
Date of comments: 05 Sept 2019
Reviewers: Emily Cox
County Code section 17-410 and Virginia Code §62.1-44.15:34 requires the VSMP authority to
act on any VSMP permit by issuing a project approval or denial. This project is denied. The
rationale is given in the comments below. The application may be resubmitted for approval if all
of the items below are satisfactorily addressed. The VSMP application content requirements can
be found in County Code section 17-401.
A. Stormwater Pollution Prevention Plan (SWPPP)
The SWPPP content requirements can be found in County Code section 17-405. A SWPPP must
contain (1) a PPP, (2) an ESCP, (3) a SWMP, and (4) any TMDL measures necessary.
1. Registration statement must be updated to include the increased area. Original registration
statement was provided.
B. Pollution Prevention Plan (PPP)
The PPP content requirements can be found in County Code section 17-404.
1. Ensure this plan shows all items of a PPP. It must be inserted in the SWPPP book on site once it is
approved.
C. Stormwater Management Plan (SWMP)
VSMP Regulation 9VAC25-870-108 requires the VSMP authority to approve or disapprove a
SWMP. This plan is disapproved, and the reasons are provided in the comments below. The
stormwater management plan content requirements can be found in County Code section 17-403.
1. Before this WPO Plan can be approved, this area must be shown on the final site plan,
SDP201900009, and the final site plan must be approved. Please show the final plans for this area
including all improvements such as final grading and sidewalk along Orchard Drive and Jarmans
Gap Rd.
2. Clearly label the floodplain and WPO buffer lines.
3. Stormwater quantity and quality must be addressed for the change in land cover.
4. Permit from VDOT is required for use of the construction entrance on Orchard Drive.
5. Show final grading/final stabilization plan for when project is complete.
Engineering Review Comments
Page 2 of 3
D. Erosion and Sediment Control Plan (ESOP)
Virginia Code §62.1-44.15:55 requires the VESCP authority to approve or disapprove an ESCP.
This plan is disapproved, and the reasons are provided in the comments below. The erosion control
plan content requirements can be found in County Code section 17-402.
1. Include all notes from County Code 18- 5.1.28 BORROW, FILL OR WASTE AREAS on the
plan.
2. The outfall of the trap goes outside of the limits of construction. Please revise limits or move all
disturbance within the current limits shown.
3. Show a wash rack for the construction entrance.
4. Show the mulch symbol anywhere TS or PS is shown.
5. Provide narrative/construction sequence stating that no work shall be completed until perimeter
controls are in place.
The VSMP permit application and all plans may be resubmitted for approval when all comments have
been satisfactorily addressed. For re -submittals please provide 2 copies of the complete permit package
with a completed application form.
Engineering plan review staff are available from 2-4 PM on Thursdays, should you require a meeting to
discuss this review.
Process:
After approval, plans will need to be bonded. The bonding process is begun by submitting a bond estimate
request form and fee to the Department of Community Development. One of the plan reviewers will
prepare estimates and check parcel and easement information based on the approved plans. The County's
Management Analyst will prepare bond agreement forms, which will need to be completed by the owner
and submitted along with cash, certificates or sureties for the amounts specified. The agreements will need
to be approved and signed by the County Attorney and County Engineer. This may take 2-4 weeks to
obtain all the correct signatures and forms.
Stormwater Management Facilities Maintenance agreements will also need to be completed and recorded.
The County's Management Analyst or other staff will prepare the forms and check for ownership and
signature information. The completed forms will need to be submitted along with court recording fees.
After bonding and agreements are complete, county staff will need to enter project information in a DEQ
database for state application processing. DEQ will review the application information based on local
VSMP authority approval. At this time, the DEQ portion of the application fees will need to be paid
directly to the state. For fastest processing, this is done electronically with the emails provided on the
application. DEQ should notify applicants with instructions on how to pay fees. When DEQ approves the
application, they will issue a permit coverage letter. This should be copied to the county.
After DEQ coverage is issued, via the coverage letter, the County can hold a pre -construction conference.
Applicants will need to complete the request for a pre -construction conference form, and pay the remainder
of the application fee. The form identifies the contractor and responsible land disturber, and the fee
remaining to be paid. This will be checked by county staff, and upon approval, a pre -construction
conference will be scheduled with the County inspector. At the pre -construction conference, should
everything proceed satisfactorily, a joint VSMP and grading permit will be issued by the County so that
Engineering Review Comments
Page 3 of 3
work may begin.
County forms can be found on the county website forms center under engineering;
hl!p://www.albemarle.org/deptfonns.asp?department=cdengMTo