The URL can be used to link to this page

Home My WebLink AboutARB201900087 Checklist 2019-07-10 Completeness Check for Signs Project#/Name: 6 r 0 7 �� S eF%S Date Received at County: 7/0 JL1 Date Received in Design Planning: Date of Checklist Check: Assigned to/Date: FEES 3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages.) ❑ No (This sign will not be constructed in an Entrance Corridor) $0.00 FEE TOTAL(Please add all the amounts checked in sections 1—3): $ FREESTANDING SIGNS A. Submittal Requirements ❑ Site plan or latest approved plat showing,to scale,the proposed locatio' • the sign(s)with dimensions. ❑ Distance from the sign to the property lines and/or edge of the V t 0 T right-of-way. ❑ If the sign will be located in an easement,a letter of appro from the easement holder will be required. ❑ A to-scale color illustration of the proposed si._ showing ❑ Dimensions of the sign,including ove . 1 height from the ground;cabinet size,length,width and depth;base size,etc. (Be sure to also include thes, dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or gra! ics in their proposed location. ❑ Entrance Corridor Require -nts: If the sign is to be constructed in an Entrance Corridor,also provide a color illustration of the front an• ide elevations of the sign showing: o If internally ilium' : ed, indicate which areas of the sign are opaque and which are illuminated.Internally illuminated cab' et signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit onl •om behind,the color of an opaque material cannot be detected nor can objects be seen through it.) o Identific. on of proposed materials and colors. Include standard color id numbers(Pantone,Benjamin Moore, Acry ' , etc.)for all materials,text,graphics,base,faces,trim caps,returns,etc. o ' ovide accurate physical samples of all colors proposed,preferably in the material proposed.(Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign,including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS. v J r/ �A drawing,to scale,showing dimensions of the sign(length,height,depth). Elevation drawing(s)or modified photograph of the entire building,to scale and in color,showing The sign location on the building,sign height above grade,and the length of building frontage. (Be sure to also V.1.-- include these dimensions on the diagrams provided in Appendix B.) Sign lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: Vindication of sign type(channel letters, cabinet,panel,etc.). Indicate on the drawings the proposed materials and colors.Include standard color identification numbers (Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps,etc.For channel letter signs,indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. F.,22_ a-.)-:c(3 ei v t 20 S 1 o Provide accurate physical samples of all colors proposed in the sign,preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) -o cation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity,style, shielding, color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17. o *or internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated. (Opaque aterials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation ❑ Manufacturer cut sheets describing illumination type,intensity,style, shielding,color,and height. All lighting must meet ordinance requirements as outlined in Section 4217 of the Zoning Ordinance. NOTES: