HomeMy WebLinkAboutARB201900091 Checklist 2019-07-26 Completeness Check for Signs-(c_ /
Project#/Name: /2'1O(/� 1 / '', )• / /c.`2/7_, %2 r is:,-:,/ '��f
Date Received at County: 1 1 1f
/q
Date Received in Design Planning: -7 /,94.A
Date of Checklist Check: `7/ z4,f 1 01 Assigned to/Date:
FEES
3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.01 9-','"-("`/
Comprehensive Sign Review. See ARB requirements next pages.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked in sections 1—3): $
FREESTANDING SIGNS
A. Submittal Requirements
ElSite plan or latest arirpved plat showing,to scale,the proposed location�of t e sign(s)with dimensions.
❑ Distance from the sign toe property lines and/or edge of the VDOTA ht-of-way.
❑ If the sign will be located in a asement,a letter of approval fro 'the easement holder will be required.
❑ A to-scale color illustration of the propos sign showing
❑ Dimensions of the sign,including overall ' ht fr-m the ground;cabinet size,length,width and depth;base
size, etc. (Be sure to also include these dimensions o e diagrams provided in the Sign Permit Application packet.)
❑ Proposed lettering and/or graphics in their o osed ocation.
❑ Entrance Corridor Requirements: If the sig is to be cons ted in an Entrance Corridor,also provide a color
illustration of the front and side elevations the sign showing:
o If internally illuminated, indicate wh' areas of the sign are opaque uiwhich are illuminated.Internally
illuminated cabinet signs must hav opaque backgrounds. (Opaque materi &don't allow light to pass through.
When lit only from behind,the for of an opaque material cannot be detectedher can objects be seen through it.)
o Identification of proposed m erials and colors.Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for all materi s,text,graphics,base,faces,trim caps,returns,etc.
o Provide accurate physica samples of all colors proposed,preferably in the material proposed. (Paint chips that
accurately reflect the pro osed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
[�A-drawing,to scale,showing dimensions of the sign(length,height,depth).
�'Ele�dtion drawing(s)or modified photograph of the entire building,to scale and in color,showing
❑ The sign loc i the building,sign heIgh at bove grade,and the length of buildi g fh rontage.(Be sure to also
include thesee dimensions .)on the diagrams provided in Appendix B
❑ Sign Iettt�Fing-and/or gr ics in their proposed location.
Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
o Indication of sign ttchannel letters, cabinet,panel,etc.).
ls
r Indicate on the drawings the proposed mate/la and colors.Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps, etc.For channel letter
signs,indicate on the drawing that the rl.,m6y color shall match the color of the wall to which the raceway is
attached.
o�Provide accurate physical sam of all colors proposed in the sign,preferably in the material proposed. (Paint
/chips that accurately reflect a proposed colors are acceptable.)
( Location of proposed light u et s and manufacturer cut sheets describing illumination type, intensity,style,
shielding, color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
(o or internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
VI materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
IILLLUMINATION REQUIREMENTS
9'The location of proposed light fixtures identified on a plan and/or elevation
El anufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height.All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
/