HomeMy WebLinkAboutARB201900027 Checklist 2019-03-07 Completeness Check for Signs 64
Project#/Name: AZ6 -I?`�7 //1/74, / Ci-7 1
Date Received at County: 212—ls /9
Date Received in Design Planning:
3/.
Date of Checklist Check: 3/ // y Assigned to/Date:
FEES
3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor? AO G(�t,.e
P`�-
(See the Entrance Corridor mapin the Sign Permit A licationpacketfor a list of Entrance Corridors.)
PP �
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00
Comprehensive Sign Review. See ARB requirements next pages.) '
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) 1$0.00
FEE TOTAL(Please add all the amounts checked in sections 1—3): $
FREESTAND G SIGNS
A. Submittal Requi ents /
❑ Site plan or latest approvelat showing,to scale,the proposed 1 c{ation of the sign(s)with dimensions.
❑ Distance from the sign to the property lines and/or edge of the DOT right-of-way.
❑ If the sign will be located in an ea ement,a letter of approv from the easement holder will be required.
❑ A to-scale color illustration of the pro osed sign showing
❑ Dimensions of the sign,including ov all heigh from the ground;cabinet size, length,width and depth;base
size,etc. (Be sure to also include these dim t sion on the diagrams provided in the Sign Permit Application packet.)
❑ Proposed lettering and/or graphics in then• roposed location.
❑ Entrance Corridor Requirements: If the si is be constructed in an Entrance Corridor,also provide a color
illustration of the front and side elevations f the si showing:
o If internally illuminated, indicate whi h areas of th sign are opaque and which are illuminated.Internally
illuminated-cabinet signs must hav- opaque backgro ds.(Opaque materials don't allow light to pass through.
When lit only from behind,the co or of an opaque mate 'al cannot be detected nor can objects be seen through it.)
o Identification of proposed ma •rials and colors.Include sard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for all materia ,text,graphics,base,faces,tri caps,returns,etc.
o Provide accurate physica amples of all colors proposed,prefe ably in the material proposed.(Paint chips that
accurately'reflect the p a posed colors are acceptable.)
o Provide a site plan s e owing proposed landscaping around the sign, ' cluding botanical names and planting sizes.
o Additional subm' al materials may be required if review by the ArchNctural Review Board is necessary.(The
applicant will be notified if this requirement applies.)
•
WALL SIGNS L.-7
vAdrawing,to scale,showing dirt'nsions of the sign(length,height,depth).
Elevation drawing(s)or modified photograph of the entire building,to scale and i or,show. g
❑ The sign location on the building,sign height abo_Ye grade,and the length of bui inrd g frontage.(Be sure to also
include these dimensions on the diagrams provided in App ix B)IZE o,,,
Sign le ter' g and/or ics in their proposed location. 0 r i c
Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
I// illustration of the front and side elevations of the sign showing:
c% Indication of sign pe(ch nnel lette ,cabinet,panel,etc.).
/o Indicate on the drawings the proposed mat als and c ors. Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps, etc.For channel letter
signs,indicate on the drawing that the race color shall match the color of the wall to which the raceway is
attached.
Provide accurate physical safes of all colors proposed in the sign,preferably in the material proposed.(Paint
chips that accurately reflect the proposed colors are acceptable.)
Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity,style,
vshielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
0 or internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated.(Opaque
materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
The location of proposed light fixtures identified on a plan and/or elevation
anufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height.All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: