The URL can be used to link to this page

Home My WebLink AboutARB201900050 Checklist 2019-05-08 Completeness Check for Signs Project#/Name: — Ka _5 0 ` 0 v L� iisu D EX Date Received at County: 4116, !i ci Date Received in Design Planning:�y Date of Checklist Check: 6I b 11.1 Assigned to/Date: FEES 3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages.) ❑ No (This sign will not be constructed in an Entrance Corridor) $0.00 FEE TOTAL(Please add all the amounts checked in sections 1—3): $ FREESTANDING SIGNS A. Submittal Requirements ❑ Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right- ay. ❑ If the sign will be locates.in an easement,a letter of approval from the sement holder will be required. ❑ A to-scale color illustration o he proposed sign showing ❑ Dimensions of the sign,inclu•'•t overall height from e ground;cabinet size,length,width and depth;base size,etc. (Be sure to also include these :' ensions on th- diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in thei •ro.•sed location. ❑ Entrance Corridor Requirements: If the sign i o •- onstructed in an Entrance Corridor,also provide a color illustration of the front and side elevations of e sign sho • •:: o If internally illuminated, indicate whic• areas of the sign are •ague and which are illuminated.Internally illuminated cabinet signs must have •'ague backgrounds.(Opaqu- aterials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be •: ected nor can objects be seen through it.) o Identification of proposed mate als and colors.Include standard color id n•• bers(Pantone,Benjamin Moore, Acrylic, etc.)for all materials, ext,graphics,base,faces,trim caps,returns,etc. o Provide accurate physical samples of all colors proposed,preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The applicant will be notified if this requirement applies.) WALL SIGNS ❑ A drawin to scale, showing dimensions of the sign(length,height, epth) ❑ Ele ion drawing(s)or modified photograph of the entire building,to scale and in color,showing The sign pion on the building,sign ght above grade,and the length of building tage.(Be sure to also include these dimensions on the diagrams provided in Appendix B) • Sign lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front a side elevations of the sign showing: Indication of sign type(channel letters, cabinet,panel,etc.). Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps, etc.For channel letter o r signs,indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. Provide accurate physical samples of all colors proposed in the sign,preferably in the material proposed. (Paint c • s that accurately reflect the proposed colors are acceptable.) o c/ey0Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity,style, shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17. 0 For internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS The location of proposed light fixtures identified on a plan and/or elevation anufacturer cut sheets describing illumination type,intensity,style, shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: kk, - or Ku w1es/ er5 — 5 --ipL S l F `f— a L e901 I) , FD OraCiU-P 106 9( ti(d! C L17-7 vk„ SIGN REVIEW CHECKLIST with REFERENCES—Wall Sign, Single Business Updated: 6-17-2016 REF CHECKLIST ITEM NOTES TYPE I ❑ 9.b For internally illuminated signs, channel lettering c,t,k. am, itv p€ cea (mounted on a raceway or individual letters) is preferred to e,f.. ,r‘i % ki9 I (' cabinet signs. f ed1 e: 61.41 e je` 5.b When channel letters cannot be adequately accommodated, internally illuminated cabinet signs may be considered. 6 - Reader boards are discouraged. /) t41' MATERIALS ❑ 4:c Materials used in the sign should complement the building thz1vvis, %,\_, r) F,S being served by the sign. COLOR o 4.e Color for raceway-mounted channel letters, the raceway , )( k -' shall match the wall color. /v `- Sign colors must be harmonious with each other. frtk taidilvvit ()vie t k€mot ervoeti .-Sign colors must not clash with the site, when viewed in tie daylight and at night. Overly intense color, (such as dayglo or fluorescent colors), are prohibited. I01 Use of three colors or less (black and white considered as colors) 3 L/` Additional colors may be approved if they contribute to the sign balance/unity. 'SIZE, SCALE,PROPORTION,AND LOCATION 4.b Signs may not exceed the size, height and setback a requirements as outlined in Section 4.15 of the Albemarle t `k '� s REF CHECKLIST ITEM NOTES County Zoning Ordinance (unless sign has a variance). Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall , to' �— f A.A area is a good working proportioning system for placing a \- . sign. J ❑ Appendix Color, form, surface pattern, shape,and disposition of (. A.A.4 elements and openings in an architectural design can affect d...,. our perception of scale and can impact the appearance of a sign on a building. ❑ 9.d The wall sign's size must coordinate with the architectural element's size. The sign should not over-crowd the architectural element, it the wall, or the sign area. Buildings and building elements should not be used as billboards. o 9.a Wall signs must integrate with the building's architecture. tt.) :�' g _s` The sign placement should not obscure architectural i features or details, (such as cornices,windows, columns, A D ti 1f: 01 -6,,4 " / pilasters and paneling). i 9.d An appropriate height for channel letters in a 30" high sign e t ' band is 18". ;J4 eN y This allows 6" of unoccupied space above and below the letters. 4" of clear space above, below, and to the sides of a channel letter sign is considered a minimum, with larger clearances required for larger sign bands. Degree of visibility, the distance from the Entrance LA t Corridor, and the architectural design of the building/area �� ` 6``ill l ' 2 REF CHECKLIST ITEM NOTES will determine sign size, placement, and proportions. �] 4.d Lettering should be in proportion (font size and typeface ) , °t tr' Kulei,— &: r ' l/ style)to the sign and the building. Use of three typefaces or less. - 2 Additional typefaces/may be approved if they contribute to A 'I k. a balanced/legible/unified sign design. to ❑ 9.e.iv The width of the outline must be in proportion to the width of the letter. An outline width of 1/8" has been found to be an appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS AND GRAPHICS cp 4.f The ARB may require that the color and scale of standard s tom s V v templates for trademarks, service marks, corporate logos U and graphics be modified. VA' I ^jre-e) `� When used,trademarks, service marks, corporate logos and/or graphics should be incorporated as an integral part of the overall sign. 'k.,6 54 External (or no) illumination is preferred for approved \h �`A graphics/logos; 'i Y.b internal illumination may be considered for approval on a case-by-case basis. LIGHTING ❑ 9.e.i External(or no) illumination is preferred for wall signs. , 1 / 4-1,) in,$) 1,4,h,j-- q_ ..„...er,„...t.,0 C/❑/ 5.f Any internal illumination is considered to contribute to --e_AcKAJ C ..a f / visual clutter and will be limited. 3 REF CHECKLIST ITEM NOTES v'-5.c Internal illumination design approval will be evaluated on ; irli size, balance, complexity, and distance from the Entrance t I -/ VLS B 3 .. Corridor. ....„ ?C:9 9.e.iv The backgrounds of such cabinet signs must be made a i c..4,0 opaque (zero light transmission). o 5.e External illumination should be shielded and not create As1 tA-jv V glare. All external light sources shall be white. �Q 9.ii Sign lighting (external) should be shielded so that it illuminates only face of the sign and does not shine beyond o the edge of the sign. )/ ui Channel letters with translucent faces must have no light ` spilling outward from the top, bottom, sides or back. I ,I Faces and returns of channel letters shall be opaque when te- back-lit(halo-lit). � �,9.iv Cabinet signs shall have a non-illuminated background, or k� `� lc_ an opaque (zero light transmission)background. Cabinet signs shall be constructed such that no light spills outward from the top, bottom, sides or back. o 5.g All illumination shall be non-blinking. ❑ 5.h An exposed light source that forms the body of a sign, , ,� (such as exposed neon signs), shall not be used in the Entrance Corridors. _ ARB ACTIONS 0 If LED lighting is proposed the sign drawing must state - The level of illumination provided by the LED lights will k0 not exceed the illumination produced by a single stroke of l V 30 milliamp (ma) neon. Action on ARB-P Red acrylic#2283 has been determined to be an ( `0( 4147 y ff t dld1 4 REF CHECKLIST ITEM NOTES (BP)2001-12 inappropriate color for signs. Pantone color match t Wood Grill for 2283 is 485C. Red#2793 has been approved 11)r' ito 4, as an acceptable substitute. Pantone color match for 2793 is 187C. (See below.) 12/21/15 action on Generally, for signs in the Entrance Corridors, red 485 ARB 2015-114 & - may be acceptable on a case-by-case basis as a 115 Shell Signs secondary color. `ARB Visual clutter resulting from adjacency, for example at the Action Hardee's locations, is a reasonable basis for not allowingpr Memo: illumination of the graphic. ( " 5/7/12 ARB Accent color letters can be used in a sign when portrayed Action as a graphic,up to 33% of the length of the sign. Memo: 8/3/2015 5