The URL can be used to link to this page

Home My WebLink AboutARB201900117 Application 2019-10-1711 Application and Checklist for Sign Permit 0. ar erin.nyng Epp c on regiu�ro#nents and feed: 1. Sign Permit -- Please indicate 1phlch sign type you are applying for: ❑ Freestanding or Monument sign: $91.64 E If a footing is required, an additional fee is required; '$32.64 Wall Sign (Includingproperty, awning, frel pump canopysigns); $91.64 ❑ Sign Refacing; $59.00 2. Electrical Permit -- Will the sign be illuminated? 2/' Yes (lllunrinoled signs require an electrical permit and an electrical schematic.) $48.96 0 No $ 0.00 3. ARD Review — Will the permanent signs) be constructed In an Entrance Corridor? (See the Entrance Corridor map in the Sign Permil Application packet far a list ofEntrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions ofa $129.00 Comprehensive Sign Review_ See ARB requirements next pages) Yes (7►rissign will he constructed in an Entrance Corridor and it does meet the conditions ofa Waive Fee Comprehensive Sign Review. See ARE requirements next pages.) ❑ No (7his sign will not be constructed in an Entrance Corridor) $ 0:00 FEE TOTAL (Please add all the amounts checked in sections 1— 3): $` FOR OFFICE USE ONLY BPII (irr�® G ARM Fee Amount'$ i .O Date Paid` � l� r eipttt Check#AZZ By1::;� •� County of Albemarle Department of Community Development 401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 972-4126 I I/InD15 Page l of 4 Palm C Submrttal-ItemP :Required. Nute. 5ubmitfal.packages mGstcontain 4 collated copses of all usformation unless othtkMii in icated. AddfioRl subr t(al rnaterialg inay Mbe:requiied ii'review by the Architectural Review Board 1s necessary. Applicants will beimbfiel.if additional materials or AR8 review ale required: SECTION i. FREESTANDING, SUBDIVISION OR DIRECTORY SIGNS E A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way, ❑ A footing/foundation diagram showing how the base or pole will be anchored in the ground. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit dpplication packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs musthave opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) o Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. o Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies,) B. Inspection Requirements for Freestanding, Subdivision or Directory Signs ❑ Applicant must mark the location of the property lines and the location of the sign with stakes in preparation for a preliminary zoning inspection. (All four corners of the sign must be marked with stakes that are easily visible to all inspectoow.) ❑ A preliminary zoning inspection must be completed to verify the location of the sign before the permit can be issued. ❑ Freestanding signs are required to have footing inspections. (scheduled by applicant) ❑ Freestanding signs are required to have electrical inspections if illuminated, (scheduled by applicant) ❑ Freestanding signs are required to have final building and zoning inspections. (scheduledbyapplicant) 11/1/2015 Page 2 of SECTION 2: WALL SIGNS A. Submittal Requirements kJ A drawing, to scale, showing dimensions of the sign (length, height, depth). [Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these d&P e s o s on the diag a s provided in flppendu B.) E2/Sign lettering and/or graphics in their proposed location. eintrance Corridor Requirements; If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: ol" Indication of sign type (channel letters, cabinet, panel, etc.). o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached, o Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable,) o Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it, Internally illuminated cabinets must have opaque backgrounds.) B. Inspection Requirements for Wall or Wall and projecting signs are required to have electrical inspections if illuminated. (scheduled by applicant) Wall and projecting signs are required to have final building and SIaCTioN 3: ILLUMINATION REQUIREMENTS A. If the proposed sign is to be ilhsminated, the applicant must provide the following; Lff Electrical permit ❑ Electrical schematic ❑ The location of proposed light fixtures identified on a plan and/or elevation ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. SECTION 4: WORK VALUATION ��, 8� 1 11/I/24I5 Page 3 of A. Work Valuation $ Part D .A' leant Agreement Applicant must read and sign . Each application package must contain 4 folded copies of all plans and documents being submitted. Only 1 set of material/color samples is required. All submittal items become the property of Albemarle County. Applicants are encouraged to maintain duplicate copies in their own files. • The application package is not complete without this checklist, completed, signed, and included with the required submittal materials indicated on the checklist. I hereby certify that the information provided on this application and accompanying information is accurate, true and correct to the best of my knowledge an lef and contains all information required by these checklists Signal erson completing checklist Date j.��-- Printed Name / Title Daytime phone number of Signatory County of Albemarle Department of Community Development 401 McIntire Road, North Wing, Charlottesville, VA 22902-4596 (434) 296-5832 Tel, (434) 972-4126 Fax www.albemarle.om 1111/2015 Page 4 of CERTIFICATION THAT NOTICE OF THE APPLICATION HAS BEEN PROVIDED TO THE LANDOWNER This form must accompany zoning applications (Homy Occupation, Zoning Clearance, Zoning Admfnistratar Determinations or Appeals, Sign Permits, BuflrlingPermits) if the application is not life owner. a I certify that notice of the application, o" 00VNN,ti-+ touilty application darfie and number] was provided to I7tri. "64A,+Fvl Pw CS the owner of record of Tax Map [name(s) of the record owhers of the parcel] and Parcel Number mannefidentifed below - by delivering a copy of the application in the Hand delivering a copy of the application to (Name ofthe record owner if the record owner is a person; if the owner of record is an entity, identify the recipient of the record and the recipient's title or office for that entity] on Date Y Mailing a copy of the application to T>AAv%taAAA-" A-'� �itS [Name of the record owner if the record owner is a person; if the owner of record is an entity, identify the recipient of the record and the recipient's title or office for that entity) on 12-S 1 Zo l 'l to the following address: Date ea Ae_ e, duunba av► r., c,�{s . c.aw� [address; written notice mailed to the owner at the last known address of the owner as shown on the current real estate tax assessment books or current real estate tax assessment records satisfies this requirement]. Signature of Applicant Print Applicant xame Date