Loading...
HomeMy WebLinkAboutARB201900114 Checklist 2019-10-08 411111111111r- SIGN REVIEW CHECKLIST WITH REFERENCES-Freestanding Signs REF CHECKLIST ITEM NOTES TYPE p/8.a Monument signs are preferred to pole-mounted signs. A1c /1,1„��.,1. Pole signs may be considered if existing site conditions rule Alf A''' out the ability to use a monument sign, and only when the pole is in proportion to the sign cabinet or panel. MATERIALS jam' 8.b Materials used in both the sign and support structures should 0 _w be complementary. * fi AA)/ e)/ 4"�' They should also support the aesthetics of the building/complex being served by the sign. p' 8.b It is preferred that the base material match one of the primary6/ building materials unless the sign design represents itself as a freestanding L element complementing the building. COLORS 0 4.e Colors must be harmonious with each other. iveIA4 In G,dYk -11,rad 6-4,4Y id A t3/ Colors must not clash with other elements on the site, both 64-4 when viewed in daylight and at night.Q Overly intense color, (such as dayglo or fluorescent colors), r� are prohibited. /Y�. 1 • r , Use of three colors or less V Black and white are colors. 44,t, a`_41. c.-"' o-,..1- Updated: 08-19-2019 1 REF CHECKLIST ITEM NOTES Additional colors may be approved if they contribute to a balanced/unified sign design. 4- vu 9.c For raceway-mounted channel letters, raceways shall match �� A- the wall color. �'C LANDSCAPING ❑ 8.d Use ground cover, shrubs and/or trees to integrate freestanding signs into the overall site landscape. Use plants from the Albemarle County Recommended Plants List. NI SCALE AND SIZE ❑ 4.b Signs may not exceed the size, height and setback requirements as outlined in Section 4.15 of the Albemarle Q1/`fiLs�-L� County Zoning Ordinance (unless the sign has received a variance). ❑ 8.c The structure of a monument sign shall not overwhelm the / sign. .1.1/ �/ The structure and the sign that it supports must be in proportion to each other. IGN LETTERING AND TYPEFACE L7S 4.d Lettering should be in proportion(font size and typeface style) to the sign and the building. %� � Use of three typefaces or less. 3 !Ir AZ/Y` Updated: 08-19-2019 2 REF CHECKLIST ITEM NOTES Additional typefaces may be approved if they contribute to a /14 4 balanced, legible, unified sign design. 8.e.iv If outlines of letters are proposed, the outline width must be in proportion to the letter width. N I k An outline width of 1/8" is the appropriate sign dimension. I TRADEMARKS,CORPORATE LOGOS,AND GRAPHICS cyThe ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and , (74 L,1 " graphics be modified. When used,trademarks, service marks, corporate logos and/or graphics should be incorporated as an integral part of the overall sign. LIGHTING ❑� 8.e.i External illumination (or no illumination) is preferred for freestanding signs. (1/4- ❑ S.f Any internal illumination is considered to contribute to visual clutter and will be limited. The design will be evaluated for size,balance, complexity, and distance from and relationship to the Entrance Corridor. 5.e External Illumination should be shielded and not create glare. Lighting should be aimed so as not to project illumination beyond the sign. Updated: 08-19-2019 3 REF CHECKLIST ITEM NOTES All external light sources shall be white. , // /4- ❑�$.�ii Ground mounted lighting should be shielded by landscaping so that it is not visible from any adjacent property or right-of- N' A- way. c) 5.h An exposed light source that forms the body of a sign, (such as exposed neon signs), shall not be used. S.g All illumination shall be non-blinking. S.c External illumination(or no illumination) is preferred for ' 'T nJ �-x\�tyki approved graphics/logos; r"/ internal illumination may be considered for approval. (2) 8.e.iv Cabinet signs shall have a non-illuminated background, or an / _ _ Q opaque(zero light transmission)background. �'`X�'�` Cabinet signs shall be constructed such that no light spills outward from the top,bottom, sides or back. e.iii Channel letters (although not likely appropriate for freestanding signs)with translucent faces shall be constructed such that no light spills outward from the top, bottom, sides or fVf back. If back-lit(halo-lit), the faces and returns of channel letters shall be opaque. N ARB ACTIONS %a (ARB Billboards are inappropriate for the Entrance Corridors. w Action V I ' Memo: Updated: 08-19-2019 4 REF CHECKLIST ITEM NOTES 1/19/ No refacing design (no combination of colors, images, text and layout) will make the billboard an appropriate appearance. N /� Existing billboards may not increase in size and may not 1 include modifications beyond the existing sign surface. No new illumination of any kind may be added to the billboard. o Reader boards shall have an opaque background. Action Ali Memo: 1/19/10) Only the letters may be illuminated, but illumination is not required. Reader boards shall not exceed 40% of the size of the overall sign face. The background color of the reader board shall be black or some other color already on the sign face. Construction of the reader board shall be integral with the main sign. The track holding the letters shall have minimal visual impact. t❑ (ARB -�iyn etic stucco ptable f r „tea . „lid V Action surface such as concrete block and if limited to use as a flat N( "4 Memo: surface , b, .v gr,,..,a r letter;,, Updated: 08-19-2019 5 REF CHECKLIST ITEM NOTES 5/4/09) Styrofoam backing is not acceptable. (Deleted Following 8/1.9/1.9 ARB action) (ARB Synthetic stucco can be used for signs regardless of the Action material to which it is attached. However, the condition where Memo the sign meets the ground must be addressed. 8" of a durable 8/19/19) solid material (not EIFS) must be provided at the base unless NbA- the sign is located in a landscape bed whose design avoids //// potential maintenance issues of EIFS at the ground. Action on ARB- Red acrylic #2283 has been determined to be an P(BP)-2001-12 inappropriate color for signs. Wood Grill Pantone color match for 2283 is 485C. Red#2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. (See below.) 12/21/15 action on Generally, for signs in the Entrance Corridors, red 485 ARB 2015-114 & may be acceptable on a case-by-case basis as a secondary J( -115 Shell Signs color. o (ARB Scale, location,proximity to existing building(s), quality of Action sign materials, and sign height and other pre-existing Memo: conditions determine how much planting is required at the 5!t-/yn 10/5/09) base of the freestanding sign. ❑ Deleted following level of illumination provided by the LED lights will not t / 6/3/19 exceed the illumination produced by a single stroke of 30 V ARB action ❑ Internal LED for the gas pricing: Daytime intensity limited to 70% of maximum intensity;Nighttime intensity limited to /,41 t-f-' 16%of maximum intensity with automatic dimming at dusk. ARB _ Visual clutter resulting from adjacency, for example at the Updated: 08-19-2019 6 V REF CHECKLIST ITEM NOTES Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. ,� l /� 5/7/12 (mil / �J Updated:08-19-2019 7 Completeness Check for signs lit g_. / 4— / 4Project #/Name: f)CXUN St 64.) £/20tAc.W 2(.I€ , Avz+��-'r Date Received at County: f I Z.? IL 9 Date Received in Design Planning: 4 Date of Checklist Check: 1 0 C �i Assigned to/Date: FEES 3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages.) ❑ No (This sign will not be constructed in an Entrance Corridor) ��,g, f $0.00 FEE TOTAL(Please add all the amounts checked in sections 1—3): $ FREESTANDING SIGNS Submittal Requirements ..� •• plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. p 7 r� i istance from the sign to the property lines and/or edge of the VDOT right-of-way. COf the sign will be located in an easement,a letter of approval from the easement holder will be required. I [].-A to-scale color illustration of the proposed sign showing Dimensions ions of the sign, including overall height from the ground;cabinet size, length,width and depth;base size,etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ton `Proposed leifering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor,also provide a color ' lustration of the front and side elevations of the sign showing: illpf internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds.(Opaque materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) o Identification of proposed materials and colors.Include standard color id numbers(Pantone,Benjamin Moore, Acrylic,etc.)for all materials,text,graphics,base,faces,trim caps,returns,etc. 5-- provide accurate physical samples of all colors proposed,preferably in the material proposed.(Paint chips that accurately reflect the,proposed colors are acceptable.) Provide a site plan showing proposed landscaping around the sign,including botanical names and planting sizes. Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The N applicant will be notified if this requirement applies.) �rYY-,tt 't c--01-ea l 'fit 1, WALL SIGNS ❑ A drawing,to scale,showing dimensions of the sign(length,height,depth). ❑ Elevation drawing s)or modified photograph of the entire building,to scale and in color,showing ❑ The sign locatio on the building,sign height above grade,and the length of building frontage.(Be sure to also include these dimens'.ns on the dia•rams provided in Appendix B) «� e ❑ Sign lettering and/or g : •hics in their proposed locati• ❑ Entrance Corridor Requirements: he sign i • •e constructed in an Entrance Corridor also provide a color illustration of the front and side elevations : e sign showing: o Indication of sign type(channel : ers,cabin- sane,etc.). o Indicate on the drawings •- proposed materials and • ors. Include standard color identification numbers (Pantone,Benjamin t•re,Acrylic,etc.)for all materials,texlz graphics,faces,trim caps,etc.For channel letter signs,indicate on .- drawing that the raceway color shall match the color of the wall to which the raceway is attached. o Provide . urate physical samples of all colors proposed in the sign,prefe bly in the material proposed. (Paint chip at accurately reflect the proposed colors are acceptable.) o ocation of proposed light fixtures and manufacturer cut sheets describing illumination type,intensity,style, shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17. • For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated.(Opaque materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION QUIREMENTS ❑ The location of proposed light fix identified on a plan and/or elevation ❑ Manufacturer cut sheets de i ing illu ion type, intensity,style,shielding,color,and height. All lighting must meet ordinance require nts as outlined in Section 4.17 of the Zoning Ordinance. NOTES: