HomeMy WebLinkAboutSUB201700187 Review Comments Road Plan and Comps. 2019-10-30COUNTY OF ALBEMARLE
Department of Community Development
401 McIntire Road, Room 227
Charlottesville, Virginia 22902-4596
Phone (434) 296-5832 Fax (434) 972-4126
Road and Drainage plan review
Project title:
Crozet Court
Project file number:
SUB201700187
Plan preparer:
Shimp Engineering [Justin@shimp-engineering.com]
Owner or rep.:
Stony Point Design/Build LLC
Chris Henry [chenry@stonypointdb.com]
Date Received:
1 November 2017
(Rev. 1)
5 Jul 2018
(Rev. 2)
5 Feb 2019 (Rev. 2)
(Rev. 3)
1 Apr 2019
(Rev. 4)
31 Jul 2019
(Rev. 5)
25 Sep 2019
Date of comments:
15 December 2017
(Rev. 1)
31 Jul 2018
(Rev. 2)
9 Mar 2019 (Rev. 2)
(Rev. 3)
22 May 2019
(Rev. 4)
1 Aug 2019
(Rev. 5)
30 Oct 2019 — No objection; Also. Pg. 6
Reviewer:
Matt Wentland
John Anderson (Rev. 1 - 5)
Keane, we have reviewed the road plans and have the following comments:
Engineering
1. It is not clear how the flow from the 15" CMP under Claudius Ct. next to the proposed entrance will reach
the inlet on Lot 17. Provide more detailed grading in this area to verify the neighboring property will be
unaffected by the Jamestown Road construction. (Rev. 1) Pending. Met with Applicant on 7/12/18 to
discuss bypass flow. See Engineering email: 7/18/2018 8:30 AM. (Rev. 2) Not addressed. Grading Plan,
C5, must include entire development and likely requires a separate grading sheet with drawing scale needed
to construct ditch 4A to eliminate development or drainage impact to TMP #56D-A-5, Ralston (recommend
F-0" contours; 1"=10' scale inset drawing). Ditch 1 must be included in the grading plan, not just C8,
Landscape Plan. (Rev. 3) Partially addressed. As follow-up: Show proposed grading at 1' intervals to
avoid potential impact to Ralston parcel. Options: Provide 1' proposed contours for Ditch 4A, C5 inset,
along boundary of TMP #56D-A-5, or a series of Ditch 4A spot elevations at 3 or more points to define
ditch cross section (left, right, center) so that adequate design elevations inform construction to help
minimize offsite design event storm impact to an adjacent property owner who has contacted Albemarle
County throughout the design process. This request for design elevations is required for plan approval.
(Rev. 4) Partially addressed. As follow-up: Please label 38 LF 18" DIA culvert pipe beneath pedestrian
/emergency vehicle connection between cul-de-sac and Claudius Court. Please provide storm line profile
for grate inlet, VDOT ES-1, and 38' pipe. Note: Engineering appreciates SE coordinating SSAR waiver
request with VDOT (design provides turnaround). VDOT approved SSAR connection waiver request via
letter d. 7/25/19. ACF&R may request revision to 30' R cul-de-sac to accommodate fire rescue vehicles.
Engineering defers to Fire Marshal /ACF&R /VDOT on cul-de-sac turnaround minimum radius. (Rev. 5)
Addressed. Applicant response: `Noted. 38 LF 18" HDPE Culvert now labelled as Culvert F. Profile
provided on C13. We designed the turnaround for Jamestown Road as 30'R based on the through
connection provided for emergency vehicles, and Fire Rescue & VDOT have accepted this solution.'
Engineering Review Comments
Page 2 of 6
Show easements on all the proposed ditches and pipes. (Rev. 1) Addressed. As follow-up, provide sight
distance and segmental block retaining wall maintenance easement (portion of wall is in Open Space Parcel
A). Engineering recommends Maintenance Easement cover entire wall, as this wall ensures no disturbance
to existing cemetery, a prerequisite to development. (Rev. 2) Partially addressed. As follow-up: Wall
Easement, C3, is slightly outside physical face of wall, but so limited as to provide inadequate access for
virtually any required maintenance or replacement. Increase wall easement width to provide normal access,
and to accommodate typical routine repair, maintenance, or replacement. Estimate need 12'f space either
side of the 8' segmental block retaining wall (but less at known limits of cemetery, and to exclude
cemetery). (Rev. 3) Partially addressed. Applicant response: `We looked into retaining wall easements
for other subdivisions and found that maintenance for retaining walls is covered in HOA bylaws.
Otherwise, the developer would be unable to sell lots containing retaining walls because no single
homeowner would want the financial responsibility of wall maintenance. As such, we removed the
retaining wall easement. The Crozet Ct. HOA bylaws will grant full access for maintenance of this wall.
We added a note about Maintenance on Sheet C1, "Subdivision and Road Notes," #I I.' As follow-up:
a. Provide copy of (draft) Crozet Court bylaws. Engineering retains interest in public safety aspect of
retaining walls on residential lots, especially during construction. (Rev. 4) Withdrawn.
Engineering defers to Planning.
b. Not strictly related, provide access easement for descendants of the interred at existing cemetery
(Lot 22) as required by Virginia state law (§ 57-27.1). Access must extend from public R/W to
cemetery. (Rev. 4) Addressed.
c. Engineering appreciates Applicant's level of research and rationale.
Provide Deed Book references or copies of signed agreements for any off -site construction easements (such
as on the 960 Claudius Ct. property). (Rev. 1) Addressed. Applicant response: No off -site construction is
proposed.
New
4. Revise Road Plan title to include SUB201700187. (Rev. 2) Addressed.
5. Title /C1: Revise Subdivision and Road Note #2 to reference Open Space labeled as A on sheet 3. (Rev. 2)
Addressed.
6. Title /C1: Reference Subdivision and Road Note #9: Revise design to reflect 25 mph. Delete reference to
20 mph design. Revise accordingly, Min. K,ag, etc. (Rev. 2) Not addressed. Applicant response:
`Jamestown road will function primarily as an emergency access road. We predict that almost no residents
will use this road because it does not directly connect to Park Road, the access road to the entire
neighborhood, therefore, Jamestown Road is out of the way and would cause a longer trip for each house in
the proposed Crozet Court subdivision. This road serves as a secondary connection for emergency vehicles,
and thus we have designed it with a design speed of 15 mph.' Engineering rejects this rationale.
Jamestown is a public road. Future development in the Crozet area may make Jamestown a preferred route
for subdivision access to or from points east (with construction of the eastern connector, for example).
Delivery vehicles may use Jamestown Road with high frequency. VDOT design standards apply. Please
consider initial review comment, and design for 25mph speed, minimum. (Rev. 3) Not addressed.
Applicant response: `Jamestown Road now has a design speed of 25 mph. We kept the sag curve with an
advisory speed of 15 mph, as design constraints hinder a 25mph design speed for this vertical curve. Since
this is a sag curve, the limited sight distance will only prove a hindrance at night, and to add to that there
will be almost no traffic using that stretch of road, an advisory speed will be sufficient to provide adequate
safety at the sag. See note 30, below for additional detail.' Asefollow-up: Engineering principles ensure
safety, consider typical and unusual circumstance, and specify standards that consider a range of factors,
including visibility under varying conditions. Rev. 2 review comments reject rationale that repeats with this
revision. VDOT standards for a proposed public road do not, to our knowledge, provide exception that if
allowed may compromise safety only at night. Albemarle restates requirement for Min. K,ag for approval.
(Rev. 4) Withdrawn. A pedestrian /emergency vehicle connection will be built. Revised design provides
Fire Apparatus Road section and Concrete Grid Paver Fire -lane detail (C9).
C3
7. Label roadway PC, PT, radius of horizontal curvature. (Rev. 2) Not addressed. Show requested design
information on C3, Layout Plan. (Rev. 3) Partially addressed. Asefollow-up: Please provide conventional
Engineering Review Comments
Page 3 of 6
PC labels on roadway centerlines, and adopt convention and list horizontal curvature on roadway centerline,
especially 752.9' R, Agatha Lane. (Rev. 4) Addressed.
8. Provide roadway stationing. (Rev. 2) Not addressed. Provide on C3. Appreciate stationing on C6 and
C7, but stationing on C3 is required. (Rev. 3) Addressed.
9. Label CG-6 turndowns at intersection with Park Street and Claudius Court. (Rev. 2) Not addressed. Show
on C31 even if shown elsewhere. (Rev. 3) Addressed.
10. Provide detail for CG-6 taper from 6" height to flush (0" height /turndown). (Rev. 2) Not addressed.
Applicant response: `Additional detail added.' Cannot locate detail on plans. Specify sheet with this detail.
(Rev. 3) Addressed.
11. Show residential driveway entrance aprons accurately (CG-913). Entrances shown are inaccurate, and may
be misleading. (Rev. 2) Not addressed. (Rev. 3) Not addressed. Applicant response: `We have left the
curb cuts like this to allow for variability within each lot's final house plans and because it is easier for us to
make changes to plans with the driveways drawn as shown. The plan as shown lets the road contractor
know where to place curb cuts, but allows the individual home builder the option to choose 8' or 16'
driveway widths. We understand this is a rough graphical estimate but have shown curb cut estimates like
this in other approved plans, eg. Sparrow Hill & Chesterfield Landing, and contractors will know by
individual lot plans, and via inclusion of CG-9B detail, where to build the radius for each entrance.' As
follow-up: While response appears reasonable, in practical terms it has failed. The subdivisions mentioned
were visited by problems during construction that may relate in part to less than definite design elements.
Chesterfield Landing (contractor) relocated a drive entrance that eliminated a CG-12 ramp and street tree/s.
Also at Chesterfield, drainage elements were revised or not built in accordance with approved plans.
Taking lessons from these subdivisions, it appears important to provide sufficient graphic detail of
applicable standards to ensure design intent is not lost on contractors who at times may inadvertently revise
design to the point it obscures or compromises standards during construction. While it may be easier to
leave certain details off plans, experience guides that design should reflect standards, clearly if possible.
Revise driveway entrances shown on C3 to reflect VDOT standard geometries, including width and radius.
Pg. 21, ACDSM may be helpful: (Rev. 4) Addressed.
I. Driveways: Driveways in the rural areas must meet requirements of the Zoning
Ordinance, section 184.6.6. Driveways follow the VDOT standards in the right-of-way, and
general safety and access provisions of the zoning ordinance and building code as
administered by the agent, the zoning administrator and the building official. The Zoning
Administrator has a policy regarding adequate access before certificates of occupancy can be
issued, and this policy is available from zoning officials.
12. Provide 6" wide solid white pavement markings with VDOT spec. for pavement markings, at each proposed
CG-12 crosswalk (5, total). (Rev. 2) Comment withdrawn. Applicant response: `VDOT did not request
this, we do not typically see this in subdivision street crosswalks.' Ref. Albemarle County Engineer email
to plan review staff, 3/8/2019 9:47 AM: "The road plan for Out of Bounds showed crosswalk striping where
the short private roads intersected the main public road and at a crossing that crossed the public road. VDOT
accepted the public road without requiring the striping for their road. [NAME) asked if the striping was
required for the short private road connections, stating there is very little traffic. I agreed and it appears
VDOT agrees striping isn't required or preferred for small developments."
13. Show and label extents of cemetery. Provide and show permanent barrier protection on VSMP /WPO and
across road plan sheets to avoid mishap. Clearly label cemetery boundary. (Rev. 2) Addressed.
14. Show sight distance triangles. Provide sight distance easement/s, as needed. (Rev. 2) Partially addressed.
Label sight distance lines on C6 and C8 (Park Rd. -Park Place Int.). Provide and label sight distance lines
at intersection Jamestown Road and Park Place, C6. Provide and label sight distance lines at intersection
Jamestown Road and Claudius Court, C7. (Rev. 3) Partially addressed. Asfollow-up: C9/10 sight line
profile for Agatha Lane — Park Road Int. shows 280' sight line touching existing Park Road at Sta. 13+50.
Similarly, Jamestown Road — Claudius Court Int. 280' sight distance line is within 2"-3" of Claudius Ct.
roadway surface. Confirm via field survey that sight line profiles in neither instance is obstructed by
existing terrain (Park Road /Claudius Ct.). Last: Show parcel boundaries of lots fronting Claudius Ct.
Provide sight line easements for portions of sight line/s that cross boundaries as appears to be the case at
both intersections. Sight distance easements must be recorded with (or prior to) the final plat (approval).
Last, renumber second sheet C9 as sheet C10. (Rev. 4) Comment substantially withdrawn (follow-up).
Engineering Review Comments
Page 4 of 6
Design revised to provide pedestrian /emergency vehicle access only at Jamestown Road points in question.
As follow-up: Please provide sight distance easement (Agatha Ridge Lane /Park Road Int. with subdivision
plat) as condition of final Road Plan approval. (Rev. 5) Addressed. Applicant response: `Noted. Sight
Distance easement at Agatha Ridge /Park Road intersection will be included in subdivision plat. However,
all other agencies require road plan approval before subdivision plat approval. Since sight distance
easements are shown on road plan, and since plat must have all easements shown on the road plan, this
requirement for easements is still enforceable for total project approval, so we hope the road plan can be
approved with this submittal.'
C4
15. Label A2 — Al pipe diameter /pipe material. (Rev. 2) Addressed.
16. Label E2 — E1 pipe diameter /pipe material. (Rev. 2) Addressed.
17. Revise E3 — E2 pipe diameter to 18". LD-229 shows this pipe at 98.3% of capacity, too close to capacity
threshold. (Rev. 2) Comment withdrawn. Note to designer; from Drainage Plan checklist: "A drainage
plans is typically a component of a road plan, site plan, or stormwater management plan." Applicant
response: `Biofilter outlet pipe is dependent on biofilter design per HydroCAD model. This is not governed
by VDOT pipe requirements since it does not convey water from the street, therefore size will be kept.' It
appears that with this road plan, and recent site plan, county review comments have elicited a striking
response. While fair to question authority, purpose of comments is largely to ensure compliance with
standards designed to protect life and property. If design wishes to proceed at 98.3% of capacity against
Engineering request, if P.E. is willing to seal plans and transfer repair responsibility to the development
community (HOA), so be it, but please be advised: Drainage Plan checklist specifically cites VDOT
drainage manual (Drainage, item 2) in context of road, site, and SWM plans. Design is not free to reject
VDOT requirements, review checklists, or safe and reliable performance. If designer insists on design at
98.3% of Qio_y, pipe capacity, Engineering cautions against avoidable risk. (Rev 3) Addressed. Applicant
response: `Addressed, hydraulics for the biofilter spillway system was designed and reviewed using the
HydroCAD software, which has more detail and nuance for basin design than the LD-229. The HydroCAD
model had showed that 15" barrels were sufficient. Nonetheless, the outlet pipes have been increased to
,811.1
18. Revise E2 — E 1 pipe diameter to 18", consistent with sheet C 12, outlet table, and storm line profile. Also,
LD-229 shows this pipe at 98.3% of capacity, which is unacceptable. With no margin of error, apply
conservative design principles. (Rev. 2) Comment withdrawn. Ref. item 17, above.
19. Revise B2 — B 1 pipe diameter to 18", consistent with sheet C12, outlet table. (Rev. 2) Comment NA.
20. Revise design at Str. A4: Departing pipe to Str. A3 forms acute angle with inlet pipe from Str. A4A. (Ref.
Drainage Checklist Drainage item #9 —direction of flow change.) (Rev. 2) Addressed.
21. Overreliance on 15" DIA drainage pipes violates drainage computation checklist item #1: "All proposed
systems are designed within open channel flow capacities. (HGL computations are not necessary, and
should not be relied upon unless the entire system is to be watertight)." If system is to be watertight,
provide necessary specifications and details for pipe and MH joints; gasket material, installation guidelines
and inspection, etc. The following structures have inlet water elevation higher than top of pipe: A5, A4, A2,
B5, B4, B3, B2. (Rev. 2) Addressed.
22. VDOT Drainage Calculation Packet: provide LD-347 for C-series pipes. (Rev. 2) Pending. Please submit
.PDF of revised VDOT Drainage Calculation Packet. Print copy may have become separated from print
plans. Engineering will review within 3 days of receipt, and update comments. Regret any inconvenience.
(Rev. 3) Addressed.
23. LD-204 shows inlet depth, Str. A5—0.91'. If accurate, revise so that depth at curb <0.375'. (Rev. 2)
Pending. Please submit .PDF of revised VDOT Drainage Calculation Packet. Print copy may have
become separated from print plans. Engineering will review within 3 days of receipt, and update comments.
Regret any inconvenience. (Rev. 3) Addressed. As follow-up: Compare Calc. packet Modified LD-268
(tables, last 2 pp. of packet) with each other, and with Detail 9, C13. The tables appear to be identical, but
there are slight variations in values. Please clarify why values differ. Tables are also inconsistent with
Detail 9, C13, Typical Ditch Details (Lining /10-year flow depth). Revise packet /plan for consistency.
(Rev. 4) Addressed.
24. Show graded ditch line on north side of Jamestown Road between Claudius Court and Lot 17 (also, item #1,
Engineering Review Comments
Page 5 of 6
above), per 7/12 discussion, and 7/18 Engineering email. (Rev. 2) Not addressed. Insufficient detail.
Also, please see item 1, above. (Rev. 3) Not addressed. Also, please see item 1, above. (Rev. 4)
Addressed.
C5:
25. Ref. item #24; show grading. (Rev. 2) Not addressed. Also, item 1, above. (Rev. 3) Not addressed.
Also, item 1, above. (Rev. 4) Addressed.
26. Extend existing terrain contours at least 50' beyond property lines. (Rev. 2) Comment withdrawn.
Applicant response: `We do not have this survey data. We do not typically have this as it is on other
properties which we do not have access to.' Reviewer unable to cite requirement supporting request.
27. Ditch 1 may not cross more than 3 lots. Provide yard inlet on parcel line between lot 3 and 4, and on parcel
line between lot 6 and 7. Provide storm collection system from Lot 3 yard inlet to BMP A. (Ref. Drainage
Checklist /Drainage item #11 —provisions and easements for drainage across 3 or more lots). (Rev. 2) Not
addressed. Applicant response: `Plans revised. Ditches are in private easements.' Ref. Drainage Plan
checklist, Drainage, last item: "provisions and easements for drainage across 3 or more lots. Dense
development where fencing, decking, etc is expected should provide yard inlets and pipes in easements,
rather than ditches." This is a standard review item; a checklist item. Provisions implies collection.
Appreciate easements. Provide collection (yard inlets); revise design. (Rev. 3) Partially addressed.
Applicant response: `Plans revised. Ditches only cross 2 lots now. If needed, developer can always provide
additional yard drains n the easements to keep the proposed drainage, but the current plan complies with
county ordinance and accomplishes proper drainage.' As follow-up: Ref. Drainage plan checklist /pg.1:
`Provisions and easements for drainage across 3 or more lots. Dense development where fencing, decking,
etc. is expected should provide yard inlets and pipes in easements, rather than ditches.' Checklist
requirement applies to drainage, and while ditch has been revised to cross only two lots, design must
provide easements for drainage, which, with proposed grading, crosses four lots. Please revise as requested
with initial review. (Rev. 4) Addressed.
28. Label streets. (Rev. 2) Addressed.
29. C6, Crozet Court Profile: Provide VDOT underdrain near Int. Jamestown Rd. at Int. proposed -Ex. grade.
(Rev. 2) Not addressed. County checklist requirement. Please provide underdrain at Crozet Court Sta.
13+80 and 15+00(t), else specific VDOT 2016 Road and Bridge Standard or Specification at odds with
county checklist requirement. Applicant response: `Underdrains are typically not provided for streets with
such low traffic per VDOT standards.' Ref. Road Plan review checklist, .44: "cross drain locations shown
and labeied with VDOT designations (CD-1,2) at ever major cut and tilt transition or sag curve." Design that
inadequately addresses or rejects checklist requirements may have a delayed or more difficult path to approval.
(Rev. 3) Addressed.
30. CT Revise Jamestown Road profile to meet minimum Ksag value for 25 mph, AASHTO Table 3-36 /image,
below. Ksag-Min.(25 MPH) =26. Note: K-value label is incorrect; proposed K —9.71. (Rev. 2) Not addressed.
Applicant response: `Jamestown Road designed with speed — 15 mph, Kmin —9.4, see note 6 above.'
Engineering does not accept this rationale. See item 6, above. (Rev. 3) Not addressed. Also, please see
item 6, above. (Rev. 4) Addressed.
Table 3-36. Design Controls for Sag Vertical Curves
Met
U.S. Customary
Design
Speed
(km/h)
Stopping
Sight Dis-
tance(m)
Rate of Vertical
Curvature, K°
Design
Speed
(mph)
Stopping
Sight Dis-
tance (ft)
Rate of Vertical
Curvature, K°
Calculated
Design
Calculated
Design
20
20
2.1
3
15
80
9.4
10
30
35
5.1
6
20
115
16.5
17
40
50
8.5
9
25
155
25.5
26
50
65
12.2
13
30
200
36.4
37
31. C8: Relocate tree in front of Lot 8-9, which is too close to storm drain pipe. (Rev. 2) Addressed.
C12:
32. Provide Typ. details for IS-1, SL-1. (Rev. 2) Addressed.
33. Check Str. 132A against Table LD-347, HGL. Compare inlet WSE=624.82 with profile Inv. Elev. 629.50'.
Engineering Review Comments
Page 6 of 6
Revise, as necessary. (Rev. 2) Pending. Please submit .PDF of revised VDOT Drainage Calculation
Packet. Print copy may have become separated from print plans. Engineering will review within 3 days of
receipt, and update comments. Regret any inconvenience. (Rev. 3) Addressed.
34. Label Str. B3 in profile view as requiring SL-1. (Rev. 2) Addressed.
35. Outlet protection table: La pipe outfall D1 is listed as 9' in calculation packet. Revise as necessary. (Rev.
2) Addressed. Applicant response: `It is now 34' provided to pass over the ex. sanitary pipe per ACSA
request.'
36. New: Label roads, sheets C6, C7. (Rev. 3) Partially addressed. As follow-up, provide Agatha Lane label,
C7. Please note County GIS request for revised road name. GIS review comment, below. (Rev. 4)
Partially addressed. As follow-up, please revise C9 detail to ref. Agatha Ridge Lane.
37. New, Rev. 3 — Engineering recommends eliminate Lot 22. Design proposes to include a cemetery within
this residential lot. (Rev. 4) Withdrawn. Design /developer elect to retain Lot 22.
Fire Rescue / CDD GIS (Andrew Slack) / ACSA (Richard Nelson) review comments will be forwarded, once
received. Engineering will check in with agencies. If Applicant receives direct approval of the road plan or a
statement of `No objection' to the road plan, please notify Engineering.
Engineering plan review staff are available 2-4 PM on Thursdays, should you request meeting to discuss this review.
Process
After approval, plans will need to be bonded.
County forms /checklists can be found on the county website forms center under engineering;
htW://www.albemarle.oriz/deptforms.asp?department--cdengmTo
If you have questions or concerns, please contact me at janderson2C&albemarle.org, or at 434-296-5832 ext. 3069.
Thank you
J. Anderson
SUB201700187 Crozet Court Road Plans 102519rcv5