The URL can be used to link to this page

Home My WebLink AboutARB201900110 Application 2019-12-09Application and Checklist for Sign Permit 611.1's M 0 Part Y. Determining application requirements and fees 1. Sign Permit — Please indicate which sign type you are applying for: ❑ Freestanding or Monument Sign: ❑ If a footing is required, an additional fee is required: S91.64 Wall Sign (Including property, awning, fuel pump canopysigns): $32.64 $91 64 Sign Refacing: $59.00 2. Electrical Permit — Will the sign be illuminated? ❑ Yes (Illuminated signs require an electrical permit and an electrical schematic.) $48.96 No $ 0.00 3. ARB Review — Will the permanent sign(s) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will he constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages.) Yes (This sign will be constructed in an -Entrance Corridor and it does meet the conditions ofa Waive Fee Comprehensive Sign Review. See ARB requirements next pages,) ❑ No (This sign will not he constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): S FOR OFFICE USE ONLY BP# ARB# Fee Amount S Date Paid By who? Receipt # Check # By County of Albemarle Department of Community Development 401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 972-4126 11!1/2015 Page I of Part C: Submittal Items Required 'dote: Submittal packages must contain 4 collated copies of all information unless otherwise indicated. Additional submittal materials may be required ifreview by the Architectural Review Board is necessary. Applicants will be notified if additional materials or ARB review are required. SECTION 1: FREESTANDING, SUBDIVISION OR DIRECTORY SIGNS A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way. ❑ A footing/foundation diagram showing how the base or pole will be anchored in the ground. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) o Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. o Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) B. Inspection Requirements for Freestanding, Subdivision or Directory Signs ❑ Applicant must mark the location of the property lines and the location of the sign with stapes in preparation for a preliminary zoning inspection. (All four corners of the sign must be marked with slakes that are easily visible to all inspectors.) ❑ A preliminary zoning inspection must be completed to verify the location of the sign before the permit can be issued. ❑ Freestanding signs are required to have footing inspections. (scheduled by applicant) ❑ Freestanding signs are required to have electrical inspections if illuminated. (scheduled by applicant) ❑ Freestanding signs are required to have final building and zoning inspections. (scheduled by applicant) 11/1/2015 Page 2 of A. Work Valuation Part D: Applicant Agreement Applicant must read and sign • Each application package must contain 4 folded copies of all plans and documents being submitted. Only 1 set of material/color samples is required. All submittal items become the property of Albemarle County. Applicants are encouraged to maintain duplicate copies in their own files. • The application package is not complete without this checklist, completed, signed, and included with the required submittal materials indicated on the checklist. 1 hereby cert! that the information provided on this application and accompanying information is accurate, true and correct to the best of my knowledge and belief and contains all information required by these checklists Signature of person completin checklist Date ` �9 --Z75 Printed Name / Title Ili Daytime phone number of Signatory County of Albemarle Department of Community Development 401 McIntire Road, North Wing, Charlottesville, VA 22902-4596 (434) 296-5832 Tel, (434) 972-4126 Fax www.albemarle.orU 1 1/1 /2015 Page 4 of 4 Sign Diagrams Sign Height Sign Disteme to property line- ar edge of right-of-way, it Sign Height= Lt it r of Sign Di ions � o C 4t 1 1.0 Pole -Mounted Sign — Diagram 1 (Generally not acceptable in the SCs) Sign Sign Dimensions Height Building Frontage K2 50 I Building Frontage= Sign Height = Sign Dimensions -_aq it t Wall Sign — Diagram 3 Sign 2 Height = Sign 2 Dimensions = Sign 3 Height = Sign 3 Dimensions = Sign Heigi .+.aim-w lv PI Uptx lr 111 JU or edge of right-of-way Sign Height = Sign Dimensions = Monument Sign — Diagram 2 If multiple wall signs are proposed, list dimensions here: Sign 4 Height = Sign 4 Dimensions = Sign 5 Height = Sign 5 Dimensions = Sign Diagrams revised 712009- t