HomeMy WebLinkAboutARB201900135 Checklist 2019-11-15 (2)Completeness Check forigns
Project #/Name: f (3 Zc�Iq S` 61GI
Date Received at County: It j rz ( �
Date Received in Design Planning:
Date of Checklist Check: 1 Its-liq Assigned to/Date:
FEES
3. ARB Review — Will the permanent sign(s) be constructed in an Entrance Corridor? 00
'a See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
D❑ es (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a �$I�01
Comprehensive Sign Review. See ARB requirements next pages)
❑ Yes ('This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No ('Phis sign will not be constructed in an Entrance Corridor) $ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3): $
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plan or lat t approved plat showing, to scale, the p/val
ocation of the sign(s) with dimensions.
❑ Distance from the ' n to the property lines and/or edgeDOT right-of-way.
❑ If the sign will be locate - n an easement, a letter of apm the easement holder will be required.
❑ A to -scale color illustration of the prop sed sign
❑ Dimensions of the sign, including overa e
u
size, etc. (Be sure to also include these
❑ Proposed lettering and/or graphics
from the ground; cabinet size, length, width and depth; base
the diagrams provided in the Sign Permit Application packet)
Entrance Corridor Requirements: IfAhe sign is to be const ed in an Entrance Corridor, also provide a color
illustration of the front and side eleyfitions of the sign showing:
o If internally illuminated, indte which areas of the sign are opaqu nd which are illuminated. Internally
illuminated cabinet signs ►Ast have opaque backgrounds. (Opaque mat 'als don't allow light to pass through.
When lit only from behi , the color of an opaque material cannot be detec nor can objects be seen through it.)
o Identification of prop ed materials and colors. Include standard color id num s (Pantone, Benjamin Moore,
Acrylic, etc.) for all aterials, text, graphics, base, faces, trim caps, returns, etc.
o Provide accurate ph sical samples of all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
M
n
�c
WALL SIGNS
A drawing, to scale, showing dimensions of the sign (length, height, depth).
Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing
The sign location on the building, sign height above grade, and the length of build' rontage. (Be sure to also
include these dimensions on the diagrams provided in Appendix B.)
Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
0---rndication of sign type (channel letters, cabine pan , et
C/ Indicate on the drawings the proposed m erials and colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached. /�
L,c>-- Provide accurate physical sa4d-, o all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
�-KFor internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
Me location of proposed light fixtures identified on a plan and/or elevation
anufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: