HomeMy WebLinkAboutARB201900058 Review Comments 2020-01-17 (2) the Nelllie Stevens holly should be replaced with an ornamental tree with an upright form.
(The upright Princeton Sentry Gingko was suggested.)
tic a ca //9y/ ?
/Aiz,n,‘e-a /L. 6 -? I -4"----Y-t1 I 4Al2"--
The greenscreens are acceptable if spacing is coordinated with the ornamental trees and
V2. d
if the screens are fixed to the wall.
qL - l .g�Z GG�p i tLôwv� G¢�' -��//
(
•
he greenscreen detail must include information on attachment showing that the screens
will be fixed to the wall.
l
•
1. Provide architectural elevations and details that correspond to the renderings submitted and
reviewed on 7/15/2019.
Windows in end bays on the north, west, and east elevations don't extend down to the
• stringcourses as in the 7/15/2019 drawings.
Gn.-t.---a
On the north elevation,the,proportion of the door to the canopy is different than what was
illustrated in thej 7/15//2019 drawings.
/�/% �A �
�
l� _
7� G7uk %---1-'(-cin.
2. evise the material schedule to indicate the color of the metal canopy, the color name/number of
the standing seam metal roof,the glass type, and the retaining wall material.
a. Some of the material specifications have changed since the material/color board was
submitted. Provide samples of the metal canopy(ash gray),the"light stone"metal panels,
and the ground face block(Martinsville#9316).
•
0. 1 Revise the glass to significantly reduce the tint. Choose one glass spec. Show that VLT will not
-- drop below 40% a�d-VLR will not Eee-d 30%. Add the standard window glass note to the
architectural plans.
a. No revised glass sample was submitted. The elevation sheets confirm that glass is still
tinted. rovide a glass sample (with manufacturer information and specs) with a
significantly re�uced�int
. Show the• locations of all ground- and building-mounted equipment on the plans. Show how
visibility from the ECs will be eliminated. Note that roof-mounted equipment will be difficult•to
incorporate into a cohesive design.
a. Include a note on.the site plan stating that the equipment screen wall material will match
the building wall material. �, e . S
. Revise the lighting plan to either include the canopy mount fixture on the plan and in the schedule,
and add the corresponding cut sheet, or eliminate the reference in note 4 on sheet C9.
a. e//This was not addressed. ,j
/ 77z4ATo
-6-7_, - 1/-7 ( .
4
6. Revise the lighting plan to limit illumination at the ground to 20 fc.
a. This was not addressed.
glii/( j,a)l/t).-- 023, VY(---- z
&),/ A
hi.,,,," .
.i(x v G�
7. Revise the plan to provide sufficient planting area and trees along the west side of the building to
help soften the building's appearance.Planting along the west side of the base of the building wall
should correspond to the planting shown in the submitted rendering on 7/15/19. In addition,
planting along the base of the retaining wall that corresponds to the building should be 40' on center
with planting size of 2'/2"caliper.Add an interior parking lot tree along the west side of the parking
lot.
a. The plants shown on the landscape plan do not correspond to the 7/15/19 illustration.Those
shown at the top of the wall appear to be too large for the 5.5' deep planting area. Green
screens with vines are provided along portions of the lower wall instead of trees/shrubs.
, _________L_j[,‘w 4 A-i.--—-) ,2 4 et 1 I---- 1-e I ,1_ i I-YeA ,7 2 7-‘A G 1 r 7/-- C-e k--e-I 4--I/1 7 2-2'''
sign location is shown on the plan.Note that sign location is not approved with the
U,, CA,monument/ site plan.It will be reviewed and approved with the separate sign application.