The URL can be used to link to this page

Home My WebLink AboutARB201900075 Checklist 2019-08-15 Completeness Check for- aigns Project#/Name: 1 L 14 `" - V ``�J FPily Date Received at County: Date Received in Design Planning: Date of Checklist Check: Assigned to/Date: FEES 3. ARB Review— Will the permanent sign(s) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See ARB requirements next pages.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages.) ❑ No (This sign will not be constructed in an Entrance Corridor) $0.00 FEE TOTAL(Please add all the amounts checked in sections 1—3): $ FREESTANDING SIGNS A. Submittal Requirements ❑ Site plan or latest approve plat showing,to scale,the pr osed location of the sign(s)with dimensions. ❑ Distance from the sign to th, property lines and/or edg the VDOT right-of-way. ❑ If the sign will be located in an •asement,a letter of..proval from the easement holder will be required. ❑ A to-scale color illustration of the pro••sed sign howing ❑ Dimensions of the sign, including ove : 1 -ight from the ground;cabinet size,length,width and depth;base size,etc. (Be sure to also include these dime .'•ns on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in t•eir p ..osed location. ❑ Entrance Corridor Requirements: If the.ign is to be onstructed in an Entrance Corridor,also provide a color illustration of the front and side elevatio s of the sign sho ' g: o If internally illuminated,indicate w ich areas of the sign . - opaque and which are illuminated. Internally illuminated cabinet signs must hav opaque backgrounds. (Op.a ue materials don't allow light to pass through. When lit only from behind,the c.,or of an opaque material canno .e detected nor can objects be seen through it.) o Identification of proposed mate, als and colors. Include standard co . id numbers(Pantone,Benjamin Moore, Acrylic,etc.)for all materials,t xt,graphics,base,faces,trim caps,re •s,etc. o Provide accurate physical sa Iles of all colors proposed,preferably in the .aterial proposed.(Paint chips that accurately reflect the propose colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign,including botanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The applicant will be notified if this requirement applies.) WALL SIGNS tr❑ A drawing,to scale,showing dim sions of the sign(length,heigh depth). ❑ Elevation drawing(s)//or modified photograph of the entire building,to scale and in coloring The sign lo4dion on the building,sign height above grade,and the length of building frontage.(Be sure to also include these dimensions on the diagrams provided in Appendix B) opo Sign lettering and/or graphics in their proposed location. ❑(/Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: 1...."/Iiidication of sign type(channel letters,c.•'I-•,pan,,e ��C 14,_ o dicate on the drawings the propose• and colo sf Include standard color iden�on numbers I/ (Pantone,Benjamin Moore,Acrylic,etc. • all materials,text,graphics,faces,trim caps,etc.For channel letter signs,indicate on the drawing that the : • 'color shall match the color of the wall to which the raceway is attached. o Provide accurate physical samples o all colors proposed in the sign,preferably in the material proposed.(Paint chips that accurately reflec imposed colors are acceptable.) o Location of proposed light fi:(rfures and manufacturer cut sheets describing illumination type, intensity,style, shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17. For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated.(Opaque C' materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS r O...The location of•r•.osed light fixtures identified on a plan and/or elevation Manufactur, P describing illumination type,intensity,style,shielding,color,and height.All lighting must C.) meet ordinan - equirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: \/c)9 AL...., qualm. 7 ,_,77,c,-,1,-,-,:„L„'- .,,_,) 4 ,yam SIGN REVIEW CHECKLIST with REFERENCES-Wall Sign, Single Business Updated: 6-17-2016 REF CHECKLIST ITEM NOTES TYPE 9.b For internally illuminated signs, channel lettering(mounted on a raceway or individual letters) is preferred to � � di„.„),/' cabinet signs. v a, .5.b When channel letters cannot be adequately accommodated, Ai/ internally illuminated cabinet signs may be considered. Lo--4- Reader boards are discouraged. /(l. MATERIALS ❑ .c Materials used in the sign should complement the building I �. / , .-Pn .<. 6t/ being served by the sign. rti ,-( /l t_-! `d (CA li COLOR 0 4.e Color for raceway-mounted channel letters, the raceway p /� shall match the wall color. / /' Sign colors must be harmonious with each other. -c 6()O (//te Sign colors must not clash with the site,when viewed in 1/- daylight and at night. / , i/. D Overly intense color, (such as dayglo or fluorescent /(.� �/ —,rir��-o�.<.Q • 7�?> colors), are prohibited. Use of three colors or less (black and white considered as ;"-- `,- colors) Additional colors may be approved if they contribute to the /' sign balance/unity. /y IZE, SCALE, PROPORTION,AND LOCATION Vz(l.b Signs may not exceed the size, height and setback �/� requirements as outlined in Section 4.15 of the Albemarle ‘7 ?a),,Aff II , /' ,.4c ' h /T'Lt-t ,2 1 REF CHECKLIST ITEM NOTES County Zoning Ordinance(unless sign has a variance). Vb Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall p A.A area is a good working proportioning system for placing a l2"A"A-, fv`-<,(''` N IA sign. ❑i Appendix Color, form, surface pattern, shape, and disposition of �J A.A.4 elements and openings in an architectural design can affect our perception of scale and can impact the appearance of a sign on a building. 12)/ ❑ 9.d The wall sign's size must coordinate with the architectural element's size. The sign should not over-crowd the architectural element, the wall, or the sign area. Buildings and building elements should not be used as �� billboards. 4 9.a Wall signs must integrate with the building's architecture. yui / The sign placement should not obscure architectural features or details, (such as cornices, windows, columns, /14,4%.1 4(34S pilasters and paneling). ❑ , 9.d An appropriate height for channel letters in a 30" high sign �� band is 18". This allows 6" of unoccupied space above and below the i! ,k letters. Nl 4" of clear space above, below, and to the sides of a .� channel letter sign is considered a minimum, with larger clearances required for larger sign bands. _ Degree of visibility, the distance from the Entrance GiiiQ'aitj l/idj,G _i , Corridor, and the architectural design of the building/area 2 • REF CHECKLIST ITEM NOTES will determine sign size, placement, and proportions. o 4.d Lettering should be in proportion (font size and typeface style)to the sign and the building. Use of three typefaces or less. Additional typefaces may be approved if they contribute to �/� a balanced/legible/unified sign design. ❑ 9.e ' The width of the outline must be in proportion to the width of the letter. Alf An outline width of 1/8" has been found to be an 1(4- TRADEMARKS,appropriate sign dimension. N CORPORATE LOGOS AND GRAPHICS o 4.f The ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and graphics be modified. When used,trademarks, service marks, corporate logos )20 G -• and/or graphics should be incorporated as an integral part d of the overall sign. 5.a External (or no) illumination is preferred for approved graphics/logos; (13./S.b internal illumination may be considered for approval on a �/� case-by-case basis. LIGHTING ❑ 9.e.i External(or no) illumination is preferred for wall signs. oN ❑/S.f Any internal illumination is considered to contribute to L./ visual clutter and will be limited. /C4/, 3 REF CHECKLIST ITEM NOTES ❑ 5.c Internal illumination design approval will be evaluated on size, balance, complexity, and distance from the Entrance //f ,/� Corridor. `� ❑ 9.e.iv The backgrounds of such cabinet signs must be made opaque(zero light transmission). "' / ❑ 5.e External illumination should be shielded and not create glare. All external light sources shall be white. !/— ❑ Sign lighting (external) should be shielded so that it ✓illuminates only face of the sign and does not shine beyond /79.ii the edge of the sign. �" �G ❑ 9.iii Channel letters with translucent faces must have no light spilling outward from the top, bottom, sides or back. Faces and returns of channel letters shall be opaque when back-lit(halo-lit). N '/6'i ❑ 9.iv Cabinet signs shall have a non-illuminated background, or an opaque(zero light transmission)background. Cabinet signs shall be constructed such that no light spills outward from the top, bottom, sides or back. ` 4 ❑ 5.g All illumination shall be non-blinking. ❑ 5.h An exposed light source that forms the body of a sign, (such as exposed neon signs), shall not be used in the / Entrance Corridors. ARB ACTIONS ❑ Deleted following 6/3/19 no _ ---`� ARB action ❑ Action on ARB-P Red acrylic#2283 has been determined to bean tii/C' M �' �fiL LJ / Ji4f, 71�' /// / i J 7 •' �vz" , Gv2 / o�iCJ 4 REF CHECKLIST ITEM NOTES (BP)2001-12 inappropriate color for signs. Pantone color match Wood Grill for 2283 is 485C. Red#2793 has been approved as an acceptable substitute. Pantone color match !/ for 2793 is 187C. (See below.) v/ 12/21/15 action on Generally, for signs in the Entrance Corridors, red 485 ARB 2015-114 &- may be acceptable on a case-by-case basis as a d A- 115 Shell Signs secondary color. ARB Visual clutter resulting from adjacency, for example at the Action Hardee's locations, is a reasonable basis for not allowing �,i A Memo: illumination of the graphic. 5 /12 ARB Accent color letters can be used in a sign when portrayed Action as a graphic,up to 33%of the length of the sign. - i ., Memo: 8/3/2015 5