Loading...
HomeMy WebLinkAboutARB201900104 Checklist 2019-10-02 SIGN REVIEW CHECKLIST with REFERENCES—Wall Sign, Single Business October 2, 2019 ARB 2019-104, Move Better Sign - REF CHECKLIST ITEM NOTES TYPE X 9.b For internally illuminated signs, channel lettering OK—meets approved CSC (mounted on a raceway or individual letters) is preferred to cabinet signs. X 5.b When channel letters cannot be adequately accommodated, OK—meets approved CSC internally illuminated cabinet signs may be considered. X 6. Reader boards are discouraged. Not proposed MATERIALS X 4.c Materials used in the sign should complement the building OK—meets approved CSC being served by the sign. COLOR X 4.e Color for raceway-mounted channel letters, the raceway No raceway proposed. shall match the wall color. Sign colors must be harmonious with each other. Sign colors must not clash with the site, when viewed in daylight and at night. Overly intense color, (such as dayglo or fluorescent colors), are prohibited. Use of three colors or less (black and white considered as colors) Additional colors may be approved if they contribute to the sign balance/unity. SIZE, SCALE,PROPORTION,AND LOCATION X 4.b Signs may not exceed the size, height and setback OK—per Jeff Baker CLE2019-28 requirements as outlined in Section 4.15 of the Albemarle Max allowed: 100 sq.ft County Zoning Ordinance(unless sign has a variance). Proposed: 24.5 sq.ft 1 REF CHECKLIST ITEM NOTES X Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall OK—meets approved CSC A.A area is a good working proportioning system for placing a sign. X Appendix Color, form, surface pattern, shape, and disposition of OK—meets approved CSC A.A.4 elements and openings in an architectural design can affect our perception of scale and can impact the appearance of a sign on a building. X 9.d The wall sign's size must coordinate with the architectural OK—meets approved CSC element's size. The sign should not over-crowd the architectural element, the wall, or the sign area. Buildings and building elements should not be used as billboards. X 9.a Wall signs must integrate with the building's architecture. OK—meets approved CSC The sign placement should not obscure architectural OK—meets approved CSC features or details, (such as cornices, windows, columns, pilasters and paneling). X 9.d An appropriate height for channel letters in a 30" high sign N/A band is 18". This allows 6" of unoccupied space above and below the letters. 4" of clear space above, below, and to the sides of a channel letter sign is considered a minimum, with larger clearances required for larger sign bands. Degree of visibility, the distance from the Entrance Corridor, and the architectural design of the building/area will determine sign size,placement, and proportions. 2 REF CHECKLIST ITEM NOTES X 4.d Lettering should be in proportion (font size and typeface OK—meets approved CSC style)to the sign and the building. Use of three typefaces or less. Additional typefaces may be approved if they contribute to a balanced/legible/unified sign design. X 9.e.iv The width of the outline must be in proportion to the width None proposed of the letter. An outline width of 1/8" has been found to be an appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS AND GRAPHICS X 4.f The ARB may require that the color and scale of standard None proposed templates for trademarks, service marks, corporate logos and graphics be modified. When used, trademarks, service marks, corporate logos and/or graphics should be incorporated as an integral part of the overall sign. ❑ 5.a External (or no) illumination is preferred for approved graphics/logos; o 5.b internal illumination may be considered for approval on a case-by-case basis. LIGHTING X 9.e.i External (or no) illumination is preferred for wall signs. None proposed X 5.f Any internal illumination is considered to contribute to visual clutter and will be limited. X 5.c Internal illumination design approval will be evaluated on size, balance, complexity, and distance from the Entrance Corridor. X 9.e.iv The backgrounds of such cabinet signs must be made 3 REF CHECKLIST ITEM NOTES opaque(zero light transmission). X 5.e External illumination should be shielded and not create glare. All external light sources shall be white. X 9 ii Sign lighting (external) should be shielded so that it illuminates only face of the sign and does not shine beyond the edge of the sign. X 9.iii Channel letters with translucent faces must have no light None proposed spilling outward from the top,bottom, sides or back. Faces and returns of channel letters shall be opaque when back-lit(halo-lit). X 9.iv Cabinet signs shall have a non-illuminated background, or None proposed an opaque(zero light transmission)background. Cabinet signs shall be constructed such that no light spills outward from the top, bottom, sides or back. _ X 5.g All illumination shall be non-blinking. None proposed X 5.h An exposed light source that forms the body of a sign, None proposed (such as exposed neon signs), shall not be used in the Entrance Corridors. ARB ACTIONS X Deleted If LED lighting is proposed the sign drawing must state following The level of llung ..tio. .id. l 1 y t e T t n 1i, 1 ss will 6/3/19not-exeeed-the-illuminalion-predueed-by-ci-single-st-reke-ef ARB 30 nzilliamp (ma) neon. action X Action on ARB-P Red acrylic#2283 has been determined to be an None proposed (BP)2001-12 inappropriate color for signs. Pantone color match Wood Grill for 2283 is 485C. Red#2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. (See below.) 4 REF CHECKLIST ITEM NOTES X 12/21/15 action on Generally, for signs in the Entrance Corridors,red 485 ARB 2015-114 & - may be acceptable on a case-by-case basis as a 115 Shell Signs secondary color. X ARB Visual clutter resulting from adjacency, for example at the None proposed Action Hardee's locations, is a reasonable basis for not allowing Memo: • illumination of the graphic. 5/7/12 X ARB Accent color letters can be used in a sign when portrayed None proposed. Action as a graphic,up to 33%of the length of the sign. Memo: 8/3/2015 5