HomeMy WebLinkAboutARB201900120 Checklist 2019-10-25SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business
Updated: 6-17-2016
REF
CHECKLIST ITEM
NOTES
TYPE
❑
9.b
For internally illuminated signs, channel lettering
N/A
(mounted on a raceway or individual letters) is preferred to
cabinet signs.
❑
S.b
When channel letters cannot be adequately accommodated,
N/A
internally illuminated cabinet signs may be considered.
❑
6
Reader boards are discouraged.
N/A
MATERIALS
❑
4.c
Materials used in the sign should complement the building
Standard sign materials
being served by the sign.
COLOR
❑
4.e
Color for raceway -mounted channel letters, the raceway
Raceway color matches wall color
shall match the wall color.
Sign colors must be harmonious with each other.
Colors are harmonious
Sign colors must not clash with the site, when viewed in
Colors do not clash with site
daylight and at night.
Overly intense color, (such as dayglo or fluorescent
No intense colors used
colors), are prohibited.
Use of three colors or less (black and white considered as
Ok, 2 colors used (green, white)
colors)
Additional colors may be approved if they contribute to the
sign balance/unity.
SIZE, SCALE, PROPORTION, AND LOCATION
❑
4.b
Signs may not exceed the size, height and setback
requirements as outlined in Section 4.15 of the Albemarle
Ok, sign is proportional
County Zoning Ordinance unless sign has a variance).
0
0
REF
CHECKLIST ITEM
NOTES
❑
Appendix
A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall
Ok, sign is proportional
A.A
area is a good working proportioning system for placing a
sign.
❑
Appendix
Color, form, surface pattern, shape, and disposition of
Ok, sign is proportional
A.A.4
elements and openings in an architectural design can affect
our perception of scale and can impact the appearance of a
sign on a building.
❑
9.d
The wall sign's size must coordinate with the architectural
Ok, sign is proportional
element's size.
The sign should not over -crowd the architectural element,
Ok, sign is proportional
the wall, or the sign area.
Buildings and building elements should not be used as
Ok building/building elements are not being used as
billboards.
billboards
❑
9.a
Wall signs must integrate with the building's architecture.
Sign is integrated with buildings architecture
The sign placement should not obscure architectural
Placement does not obscure architectural features
features or details, (such as cornices, windows, columns,
pilasters and paneling).
❑
9.d
An appropriate height for channel letters in a 30" high sign
band is 18".
OK
This allows 6" of unoccupied space above and below the
OK
letters.
4" of clear space above, below, and to the sides of a
OK
channel letter sign is considered a minimum, with larger
clearances required for larger sign bands.
Degree of visibility, the distance from the Entrance
High Visibility
Corridor, and the architectural design of the building/area
will determine sign size, placement, and proportions.
0
a
REF
CHECKLIST ITEM
NOTES
❑
4.d
Lettering should be in proportion (font size and typeface
Lettering is proportional
style) to the sign and the building.
Use of three typefaces or less.
Ok, 1 t eface used
Additional typefaces may be approved if they contribute to
N/A
a balanced/legible/unified sign design.
❑
9.e.iv
The width of the outline must be in proportion to the width
N/A
of the letter.
An outline width of 1 /8" has been found to be an
N/A
appropriate sign dimension.
TRADEMARKS, CORPORATE LOGOS AND GRAPHICS
❑
4.f
The ARB may require that the color and scale of standard
N/A
templates for trademarks, service marks, corporate logos
and graphics be modified.
When used, trademarks, service marks, corporate logos
N/A
and/or graphics should be incorporated as an integral part
of the overall sign.
❑
5.a
External (or no) illumination is preferred for approved
N/A
a hics/lo os;
❑
5.b
internal illumination may be considered for approval on a
N/A
case -by -case basis.
LIGHTING
❑
9.e.i
External or no illumination is preferred for wall signs.
N/A
❑
5.f
Any internal illumination is considered to contribute to
N/A
visual clutter and will be limited.
❑
5. c
Internal illumination design approval will be evaluated on
N/A
size, balance, complexity, and distance from the Entrance
Corridor.
❑
9.e.iv
The backgrounds of such cabinet signs must be made
N/A
opaque zero light transmission).
3
REF
CHECKLIST ITEM
NOTES
❑
5.e
External illumination should be shielded and not create
N/A
Tare.
All external light sources shall be white.
N/A
❑
9. ii
Sign lighting (external) should be shielded so that it
N/A
illuminates only face of the sign and does not shine beyond
the edge of the sign.
❑
9.iii
Channel letters with translucent faces must have no light
N/A
spilling outward from the top, bottom, sides or back.
Faces and returns of channel letters shall be opaque when
N/A
back -lit (halo -lit).
❑
9.iv
Cabinet signs shall have a non -illuminated background, or
N/A
an opaque zero light transmission background.
Cabinet signs shall be constructed such that no light spills
N/A
outward from the top, bottom, sides or back.
❑
j 5.g
All illumination shall be non -blinking.
N/A
❑
5.h
An exposed light source that forms the body of a sign,
N/A
(such as exposed neon signs), shall not be used in the
Entrance Corridors.
ARB ACTIONS
❑
Deleted
if LED i hti R is pr oa the a,._
" must st to
p sign .. --
following
The ?_ l • luniinat:_.fi.;a a �.,, the LED z,nh ts n
. ` 4 • -
r- - ✓
6/3/19
HOt y
ARB
action
❑
Action on ARB-P
Red acrylic #2283 has been determined to be an
N/A
(BP)2001-12
inappropriate color for signs. Pantone color match
Wood Grill
for 2283 is 485C. Red #2793 has been approved
as an acceptable substitute. Pantone color match
for 2793 is 187C. See below.
12/21/15 action on
Generally, for signs in the Entrance Corridors, red 485
3
a
REF
I CHECKLIST ITEM
NOTES
ARB 2015-114 & -
may be acceptable on a case -by -case basis as a
115 Shell Signs
secondary color.
ARB
Visual clutter resulting from adjacency, for example at the
N/A
Action
Hardee's locations, is a reasonable basis for not allowing
Memo:
illumination of the graphic.
5/7/12
ARB
Accent color letters can be used in a sign when portrayed
N/A
Action
as a graphic, up to 33% of the length of the sign.
Memo:
8/3/2015
3
'taw -Moe
ARB COMPREHENSIVE SIGN REVIEW APPROVED CONDITIONS
PROJECT #/NAME: Townside Shopping Center
TAX MAP/PARCEL#: Tax Map 60, Parcel 40C1
SIGN FEATURE
APPROVED CONDITION
NOTES
SIGN TYPE
Panel Signs
OK
LETTER FACE COLOR
TRIM CAP
COLOR/RETURN COLOR
RACEWAY COLOR
CABINET FACE COLORS
SIZE LIMITATIONS
LOCATION(S)
In sign band, centered above storefront
OK
MOUNTING DETAILS
LOGO/GRAPHICS
DETAILS
ILLUMINATION
DETAILS
Same as existing
N/A
TEXT
LETTER TYPE/FONT
MATERIALS
COLORS
Green on white panel signs
OK
OTHER
This form outlines the specific design criteria established for signs at this location.
All standard ARB Sign Guidelines also apply.
Completeness Check forXi ns
on
Project #/Name: _ARB-2019-120
Date Received at County: _10-16-19
Date Received in Design Planning:
Date of Checklist Check: 10-18-19
10-18-19
Assigned to/Date: _10-18-19
FEES
3. ARB Review — Will the permanent sign(s) be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00
Comprehensive Sign Review. See ARB requirements next pages.)
® Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages)
❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00
FEE TOTAL (Please add all the amounts checked in sections 1 — 3): $
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required.
❑ A to -scale color illustration of the proposed sign showing
❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base
size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
❑ Proposed lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color
illustration of the front and side elevations of the sign showing:
o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through.
When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc.
o Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
M
en
WALL SIGNS
® A drawing, to scale, showing dimensions of the sign (length, height, depth).
® Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing
® The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also
include these dimensions on the diagrams provided in Appendix B)
® Sign lettering and/or graphics in their proposed location.
® Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
o Indication of sign type (channel letters, cabinet, panel, etc.).
o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
o Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
o Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures identified on a plan and/or elevation
❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
cm
ru
APPLICATION REVIEW HISTORY
ARB #/Name ARB-2019-120_Quantum Movement Studio
County received application
10-16-19
Corresponding submittal
deadline/ARB meeting date
12-02-19
Transfer from intake to ARB Staff
10-18-19
First ARB staff review
10-18-19
Comments to applicant
N/A
Resubmittal received by staff
N/A
Resubmittal reviewed by staff
N/A
Were all comments addressed?
N/A
Comments to applicant
N/A
Resubmittal received by staff
N/A
Resubmittal reviewed by staff
N/A
Were all comments addressed?
N/A
Comments to applicant
N/A
Resubmittal received
N/A
Resubmittal reviewed
N/A
Approval letter sent
10-23-19
ARB meeting date
N/A
ARB action
N/A