HomeMy WebLinkAboutARB202000099 Checklist 2020-09-29 Jele
Completeness Check for Signs ���)"
Project#/Name: /e--6 l I
Date Received at County: 1 !l c,
Date Received in Design Planning:
Date of Checklist Check: CI I ZJ 20 Assigned to/Date: A
FEES
3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
El Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00'
Comprehensive Sign Review. See ARB requirements next pages.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a CW-
aive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked in sections 1—3): $
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing,to scale,the proposed location of the sign with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-o ay.
❑ If the sign will be located in an easement,a letter of approval from the -. ement holder will be required.
El A to-scale color illustration of the proposed sign showin_
❑ Dimensions of the sign, including overall height •om the ground;cabinet size,length,width and depth;base
size,etc. (Be sure to also include these dimensio . on the diagrams provided in the Sign Permit Application packet.)
El Proposed lettering and/or graphics in t - r proposed location.
❑ Entrance Corridor Requirements: If t sign is to be constructed in an Entrance Corridor,also provide a color
illustration of the front and side elev. ons of the sign showing:
o If internally illuminated,indi . e which areas of the sign are opaque and which are illuminated.Internally
illuminated cabinet signs 'st have opaque backgrounds.(Opaque materials don't allow light to pass through.
When lit only from behic the color of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of prop, ed materials and colors.Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for al aterials,text,graphics,base,faces,trim caps,returns,etc.
o Provide accurate .hysical samples of all colors proposed,preferably in the material proposed. (Paint chips that
accurately efl; t the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign,including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The
applicant will be notified if this requirement applies.)
WAL SIGNS
A drawing,to scale,showing dimensions of the sign(length,height,depth).
levation drawing(s)or modified photograph of the entire building,to scale and in color,showing
❑ The sign location on the building,si: height above gra.e,and the le th of buildin 3ntage.(Be sure to also
1/4)111` include these dimensions on the diagrams p••' '• 'ppendix B.)
Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
LX.--Indication of sign type(channel letters,cabinet,panel,etc.). kot_ei/r----1 4,1 d (vim`
1�7
Indicate n the drawings the proposed mat ire als and . 4nclu standard color identification numbers
(Palt4e,Benjamin Moore,Acrylic,etc.)for materia s,text,graphics, faces,trim caps,etc. For channel letter
signs, indicate on the drawing that the r way color shall match the color of the wall to which the raceway is
attached.
Provide accurate physical samples of all olors proposed in the sign,preferably in the material proposed.(Paint
chips that accurately reflect the proposed colors are acceptable.)
0 ocation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity,style,
shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
VFor internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated.(Opaque
materials don't allow light to pass through.When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures identified on a plan and/or elevation
0 Manufacturer cut sheets describing illumination type,intensity, style,shielding,color,and height.All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
SIGN REVIEW CHECKLIST with REFERENCES— Wall Sign, Single Business
Updated: 6-17-2016
REF CHECKLIST ITEM NOTES
TYPE
❑ 9.b For internally illuminated signs, channel lettering(mounted on a raceway or individual letters) is preferred toLif/e/tAtA),..,,a
cabinet signs.
❑ 5.b When channel letters cannot be adequately accommodated,
internally illuminated cabinet signs may be considered.
❑ 6 Reader boards are discouraged. /4`
MATERIALS
❑ 4.c Materials used in the sign should complement the building
being served by the sign.
COLOR
❑ 4.e Color for raceway-mounted channel letters, the raceway 1 /
shall match the wall color. N
("Sign colors must be harmonious with each other. 60-44,4 62"-C. CvL y.v
Sign colors must not clash with the site, when viewed in UtiGll
�•aylight and at night.
6 verly intense color, (such as dayglo or fluorescent l 7 7 u ._. 6 4-1 -ST Zi-t t y� �
•lors), are prohibited. ` cv. ryY�R(� /7 J
Use of three colors or less (black and white considered as /7 7 ` -a F yf
\/colors)
Additional colors may be approved if they contribute to the / .-D f3%.4J
sign balance/unity.
SIZE,SCALE, PROPORTION,AND LOCATION
yi 4 b Signs may not exceed the size, height and setback J Ot requirements as outlined in Section 4.15 of the Albemarle
County Zoning Ordinance(unless sign has a variance).
REF CHECKLIST ITEM NOTES
Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall
A.A area is a good working proportioning system for placing a ( l / y( G !�
sign.
❑ pendix Color, form, surface pattern, shape, and disposition of
A.4 elements and openings in an architectural design can affect
our perception of scale and can impact the appearance of a
sign on a building. G ;�C�fe-e-
1 ❑ .d The wall sign's size must coordinate with the architectural - yi .4
\� element's size. �� t_
The sign should not over-crowd the architectural element,
the wall, or the sign area.
Buildings and building elements should not be used as ��
billboards.
2
9.a Wall signs must integrate with the building's architecture.
The sign placement should not obscure architectural QA-e ahS Gi
features or details, (such as cornices, windows, columns, /,"v)
pilasters and paneling). / _,
❑ Q
An appropriate height for channel letters in a 30" high sign /
ti.:37: �G�r fv�` w� .
bands 8 1 Z.eyw
This allows 6" of unoccupied space above and below the
letters. d&a,t /.€1'° )6
4" of clear space above, below, and to the sides of a )°
channel letter sign is considered a minimum, with larger (1 (()
clearances required for larger sign bands.
Degree of visibility, the distance from the Entrance i �� G,�� ,‘Ari it--(3)4 —
Corridor, and the architectural design of the building/area .
will determine sign size,placement,and proportions.
2
REF CHECKLIST ITEM NOTES
J
4.d Lettering should be in proportion (font size and typeface `��� / �r� C-�`/
style)to the sign and the building. �%
Use of three typefaces or less. 0
Additional typefaces may be approved if they contribute to NM-
a balanced/legible/unified sign design.
❑ 9.e ' The width of the outline must be in proportion to the width /7i,
of the letter.
An outline width of 1/8" has been found to be an AM
v /In
appropriate sign dimension.
TRADEMARKS, CORPORATE LOGOS AND GRAPHICS /� � �
❑ 4.f The ARB may require that the color and scale of standard ��'`i —•,...yLL,`-'J
templates for trademarks, service marks, corporate logos
and graphics be modified.
Z .( L.,24/1,2..,t.)1"--
When used,trademarks, service marks, corporate logos
and/or graphics should be incorporated as an integral part
of the overall sign.
[ 5.a External (or no) illumination is preferred for approved v7,
graphics/logos;
CE 5.b internal illumination may be considered for approval on a
r ,
case-by-case basis. CS,'
1[
LIGHTING l 1, ,,,i___.„4.
9.e.i External (or no) illumination is preferred for wall signs.
S.f Any internal illumination is considered to contribute to
visual clutter and will be limited.
❑ S.c Internal illumination design approval will be evaluated on
J size, balance, complexity, and distance from the Entrance
Corridor.
t ❑/. 9.e.iv The backgrounds of such cabinet signs must be made
V opaque (zero light transmission). ,/to) 6'
''rC��
�-f/
3
.
REF CHECKLIST ITEM NO ES
n 5.e External illumination should be shielded and not create
V glare.
All external light sources shall be white. N
)/9.ii
Sign lighting (external) should be shielded so that it
illuminates only face of the sign and does not shine beyond
the edge of the sign.
❑ 9.iii Channel letters with translucent faces must have no light
/ spilling outward from the top, bottom, sides or back.
` Faces and returns of channel letters shall be opaque when
back-lit(halo-lit).
/❑ 9.iv Cabinet signs shall have a non-illuminated background, or - j ��SC_
an opaque(zero light transmission) background. / t/v)/L14
Cabinet signs shall be constructed such that no light spills i ¢.
outward from the top,bottom, sides or back. e....
"'� �-
�5.g All illumination shall be non-blinking.
❑ 5.h An exposed light source that forms the bodyof a sign, t^�
(such as exposed neon signs), shall not be used in the 4/l ,
V Entrance Corridors.
ARB ACTIONS
❑ Deleted rr r ED lighting is proposed the sign drawin,. ..,ust state
following The level of illumination provided by the LED lights will
V6/3/19ARB
action
o Action on ARB-P Red acrylic #2283 has been determined to be an
ti (BP)2001-12 inappropriate color for signs. Pantone color match Pi
k,
Wood Grill for 2283 is 485C. Red#2793 has been approved
as an acceptable substitute. Pantone color match
for 2793 is 187C. (See below.)
t../
12/21/15 action on Generally, for signs in the Entrance Corridors, red 485 l4 /'r
4
REF CHECKLIST ITEM NOTES
ARB 2015-114& - may be acceptable on a case-by-case basis as a
115 Shell Signs secondary color.
ARB Visual clutter resulting from adjacency, for example at the
Action Hardee's locations, is a reasonable basis for not allowing
Memo: illumination of the graphic. /0(4--
5/7/12
ARB Accent color letters can be used in a sign when portrayed C 3
Action as a graphic, up to 33%of the length of the sign.
Memo:
8/3/2015
5
STONEFIELD TOWN CENTER BLOCK:: .3N CRITERIA(ARB-2014-140)
SIGN TYPE Fa ad- s(*numbers correspond to illumination details) Projecting Signs Canopy Signs Awning Signs
1.Channel letters Panel with push-through letters/graphics -
. 'everse channel letters
3. Panel with push-through letters/graphics
LOCATION GENERALLY • Signs shall not overlap architectural features.
• Where possible,sign shall align with neighboring tenant signs for visual consistency.
,b Minimum 10" clearance to top/bottom of mounting area, and 8" around architectural features. -
Signs must be in proportion with other signs and the overall building.
SIGN LOCATION As noted on elevations. Panel signs (facade sign type 3) As noted on elevations. No sign to project above or On any canopy On valance of type 1 awnings only.
limited to west elevation of each building which does not below sign area limits as shown on building elevations.
front the Rt. 29 EC. Sign placement to be considered part of Sign placement to be considered part of the overall
the overall storefront design.Sign placement shall align storefront design. Sign placement shall align with or
with or center on architectural features where possible. center on architectural features where possible. '
SIZE LIMITATIONS Letter height max 30". Size is subject to ARB review for Signs must be in proportion with canopy face, Signs may not extend beyond the limits of
appropriate scale and proportion. other signs, and the overall building. Sign elements the vertical valance.
cannot extend above or below canopy edges.Sign
size must be appropriate to canopy size. _
PROJECTION LIMITATIONS /A 36" Max projection from face of wall.9'-0" min Sign elements cannot extend above or below Signs may not extend beyond the limits of
clearance from grade level canopy edges. the vertical valance.
COLORS GENERALLY (/• Sign colors must not clash with architectural materials or neighboring tenant signs.
v/• Letterform color to contrast background.
Use of corporate colors to be tasteful and constrained to a limited color palette; color palette to respond to and work with the architectural materials and colors of the tenant's storefront,the overall building, and
neighboring tenant signs.
L/-• Subject to ARB review for compatibility.
LETTER COLOR 1....„,„„..-Black,White,Warm Grays(Pantone Warm Gray 1—11) Black,White,Warm Grays(Pantone Warm Gray 1— Black,White,Warm Gray. Match/harmonize with Sign color to contrast awning color. Sign
11) canopy color/material. color to be harmonious with awning color.
TRIM CAP/RETURN COLOR / Trim cap color to match return color. N/A N/A N/A
✓ Return colors are Black,White, Warm Grays. _
BACKGROUND/PANEL/BODY Black,White,Warm Grays(Pantone Warm Gray 1-11) Black,White,Warm Grays(Pantone Warm Gray 1— N/A Awning colors:Sunbrella Black 08, Natural
COLOR 1 -
11) Projecting sign bodies limited to black,white and 04, Charcoal Gray 44, Navy Blue 26,Alpine
warm gray colors. Green 55, Panorama Taupe 48
MOUNTING DETAILS T ,-K/lounted to exterior wall Mounted to exterior wall Mounted to canopy face.Sign elements cannot Printed on awning valance
V extend above or below canopy edges.
GRAPHICS GENERALLY • Colors and illumination are subject to A -eview.p '` -J`�
• May be in tenant's corpor a co rs provided sign, materials and colors of storefront and building,and neighboring signs a e harmonious " "-�'
ILLUMINATION GENERALLYI_ZExternal illumination shall be well integrated into the storefront design.
ILLUMINATION DETAILS *Numbers correspond to sign type Internal LED halo-Illuminated push-through.The level Non-illuminated Non-illuminated
1. External building-mounted lights. External illumination of illumination provided by the LED lights will not
shall be well integrated into storefront design. exceed the illumination produced by a single stroke of
Internal LED halo Illumination 30 milliamp neon.
3. Internal LED halo-Illuminated push-through text with
opaque faces
Lamps used for external illumination shall not emit more
than 3000 lumens each.The level of illumination provided
by the LED lights will not exceed the illumination produced
by a single stroke of 30 milliamp neon. _
LETTER TYPE/FONT Unlimited Unlimited Unlimited Unlimited
MATERIALS Unlimited Unlimited Unlimited Fabric