HomeMy WebLinkAboutSDP201900009 Letter of Revision 2021-04-22® COLLINS ENGINEERING 200 GARRETT ST, SUITE K CHARLOTTESVILLE VA 22902
434.293.3719 PH 434.293.2813 FX
ww w. co I l i n s-e n g i n e e r i n g. co m
TRANSMITTAL
❑ FAX ❑ MAIL X DELIVERY
TO: MEGAN NEDOSTUP FROM: SCOTTCOLLINS
COMPANY: ALBEMARLE COUNTY DATE: 4/22/2021
COMMUNITY DEVELOPMENT- PLANNING
FAX: TOTAL NO. OF PAGES INCLUDING COVER:
PHONE NUMBER: SENDER'S PHONE NUMBER: 434-293-3719
PROJECT/SUBJECT: PLEASANT GREEN - PHASE I
FINAL SITE PLAN (SDP2019-00009)
LETTER OF REVISION #1
PLEASE FIND ENCLOSED:
NO COPIES DATE DESCRIPTION
1 LETTER
2 LIGHTING CUT SHEETS
4 PLAN
NOTES/ COMMENTS:
RECEIVED BY:
SIGNATURE DATE
® COLLINS ENGINEERING
April 22, 2021
Megan Nedostup
Planning Department
Department of Community Development
401 McIntire Road
Charlottesville, VA 22902
200 GARRETT ST, SUITE K CHARLOTTESVILLE VA 22902
434.293.3719 PH 434.293.2813 FX
ww w. co I l i n s-e n g i n e e r i n g. co m
RE., LETTER OF REVISION #1— Pleasant Green Phase 1 Final Site Plan (SDP 2019-0009)
Thank you for your comments dated July 29, 2020 on the above referenced project. Below are our responses to
the remaining comments on the letter of revision plan.
Planning:
1. Cut sheets for the proposed lighting fixtures are included with this submittal.
2. The photometric plan has been labeled with the footcandle counts.
3. The pole lights shall not exceed 20' in height. This has been noted on the lighting plan sheet as well.
4. All proposed light fixtures are labeled and the chart has been updated.
5. The approved landscape plan is shown to ensure there are no conflicts with the proposed lighting. The
proposed pole lights shown in the landscape island have been shifted over to allow enough space to plant
the proposed tree.
Inspections:
1. The applicant acknowledges this comment. This note has been added to the site plan sheet.
Please contact us if you have any questions or require any further information.
Thank you.
Sincerely,
Scott Collins, PE
®TRACELITE®
commercial & industrial lighting
DESCRIPTION
The RxA Series LED area luminaire features a sleek low -profile housing
design in lumen packages ranging from 9600 lumens to 41,000 lumens.
Its high -efficiency light engine is designed for optimal light control and
illumination with its three distribution types in three physical sizes. The
RxA family provides substantial energy savings through efficient delivery
of light with minimal to no uplight and efficacies up to 139 LPW. The
RxA ships standard with a 7" upswept arm, and is designed for ease of
installation on poles, slipfitters, trunnion or wall mount applications. This
product is ideal for large areas such as parking lots, walkways, roadways,
building walls, etc.
SPECIFICATIONS
Construction:
• Sleek die-cast aluminum housing with stainless steel hardware and
powder coated bronze (standard) finish for durability
• UV -stabilized polycarbonate optical lens
• Integral heat sink fins maximize heat dissipation
• Hinged driver access for ease of maintenance
• Standard with 7" straight arm (for pole or wall mount) and round
pole adaptor
• Slotted bolt pattern suitable for retrofit to most existing drill
hole patterns
• Includes a 12" whip (5 conductors provided for convenience, dimming
leads not connected)
Optics/LEDs:
• Designed with minimal uplight to eliminate light pollution
• 70 to 300 Watts replace up to 750 Watts HID for up to 70% energy savings
• Efficacies up to 139 LPW maximize energy savings and utility rebates
•Type 111, IV and V distributions optimize light distribution
-Available in 3000K, 4000K and 5000K CCT
• L70 of 130,000 hours
•CRI a70
Electrical:
• Class 2 power supply, 120-277VAC, 50/60Hz
• 1-10V Dimming driver for models 150W+ (120-277VAC only), dimming
leads require connection in field
• Power supply with high -power factor of 90% typical
• 347/480VAC Dedicated driver option for 70W, 150W, 20OW and 30OW
• Standard 10kVA surge protection for models z150W
Testing & Compliance:
•cULus Listed for Wet Locations
•Tested to meet IP66 requirements
• DesignLights Consortium® (DLC) PREMIUM Qualified
(consult QPL for qualified models)
-Operating temperature: -40°C to 45°C (40°F to 113°F)
Installation:
• Hinged driver door for ease of access
• Standard with pole mount arm (7") suitable for 4" or 5" square poles.
Includes round pole adaptor. Arm features access door for easy wiring
on site and includes knockouts for motion and photocontrol sensors
-Additional easy mount accessories such as slipfitter, trunnion, swivel
and wall bracket
Specifications am subject to change wthout notice.
Installation must be performed in accordance Nth
Barron Lighting Group installation instructions.
108103T1 Rev 10 08/20
Model:
Accessones:
Job Name:
RxA Series
LED Area Light
Gate:
Type:
,LWf'l wan®
PREMIUM
Specs at a Glance
Model
RXA-70
RXA-100
RXA-150
Rw4200
RXA-300
Wattage•
70
100
150
200
300
Lumens (Im)
9600
13,800
20,800
25,700
41,000
Elficacy(LPYy)
136
137
139
139
137
Equivalency (HID)
150/175W
25OW
40OW
40OW
750W+
Distribution
Type III, IV, V
CCT (K)
3000K 4000K, 5000K
CRI
>70
Input Voltage
120-277VAC, 50/60Hz, 347/480VAC
Operating Temp
40°C to 45°C (40•F to 113°F)
Certifications
UL Listed for Wet Locations, DLC PREMIUM
Warranty
5 Years
Weight
8.91b5 1 9.41b5 1 12.41bs 1 12.91bS
18.71bS
Nominal Wattage. Tested at 5000K CCT, 120-277VAC, Type III distribution.
See performance table for more detailed lumen information.
Note: Environment and application will affect actual performance.
Typical values and 25"C used for testing.
Options:
• Integral 120-277VAC dimming sensor (SC) for models 150W+
• 120-277VAC Twist Lock receptacle installed on arm (Twist Lock
photocontrol included)
Accessories:
-Twist Lock universal photocontrol (120-277VAC) for dusk to
dawn lighting control
• Dimming sensor for additional energy savings
• Button photocontrol (120-277VAC) for 70W and 100W models
• Multiple mounting accessories available, see ordering information
Warranty:
• Five Year Warranty (Terms and Conditions Apply)
• 10 Year Warranty available upon request, consult factory
5ARRON'
lighting group
Page 1 of 5 800.5M19,18 • wnw.barronllg.com
Ordering Information (Example: RxA-100-5-VS-4K-BR-A)
Seder Wattage, Sae
Distribution
Input Voltage
CCT Finishs Mount
RxA 70 = 70W, Small
3 = Type III
HVS1'z = 347/480VAC
3K = 3000K BL = Black A= T' Am1
100 = 100W, Small
4 = Type N
VS = 120-277VAC
4K = 4000K SR = Bronze
150 =150W, Medium
5 = Type V
SK = 5000K SV = Silver
200 = 200W, Medium
WH = White
300 = 300W, Large
Options
SC4- Integral 120-277VAC Dimming Sensor (installed)
TLPCr-120-277VAC Twist Look Photocontrd and Receptacle (installed on
Accessories- (Field Installed)
PCU = 120-277VAC Button Photocenhol for 70W and 10OW models
TL-MSSW = Dimming Sensor (120-277VAC)
TL-MSSW-REMOTE = Remote for Sensor
TLPRs = 120-277VAC Twist Lock Photocentrol and Receptacle
Notes
TLPRHr = 347-480VAC Twist Lock Pholocontrol and Receptacle
NOT available for 100W model
RxA-SF = Slip fitter Mount Bronze Finish
' 20OW Model with HVS is DLC standard qualified
RxA-TR = Trunnion Mount Bmnze Finish
s Consult factory for other finishes, longer lead times apply
RxA-WM = Wall Mount Bronze Finish
Sensor mounted to the fixture, 70W and 100W models mounted to pole mount arm only
RxASW-BR = Swivel Mount Bronze Finish
0 Photocontol mounts to receptacle installed on am1(am and photocontrol installed in field)
RxASF-XX = Slip fitter Mount (XX = BL; Black, SV; Silver, VMi; While)
0 Order as separate line item - Shipped in separate box for final installation in the field
RxA-TR-XX' = Trunnion Mount Bronze Finish (XX = BL; Black, SV; Silver, VMi; White)
z Consult factory for RxA-TR-BL and RxA-WM-BL, longer lead times apply
RxXVIJWXX7 =Wall Mot" Bronze Finish (XX = BL; Black, SV; Silver, VMi; White)
ADDITIONAL POLE MOUNTS AVAILABLE - SEE LAST PAGE FOR DETAILS
Mountinq (non-standard mounts sold separately for field installation)
Allows Fixture to Swivel and Tilt
Sample Photometry
R 450S-VS4K
IES: TYPE III MEDIUM
Specifications am subject to change without notice.
Installation must be pedomied in accordance with
Barton Lighting Group installation instructions.
108103T1 Rev 10 08/20
Slipfdter - RxA-SF (Sold Separately) Wall Mount - RxA-WM (Sold Separately)
For 2-3/8" O.D. Pipe. with Angle Markers Allows for Direct Wall Mount
R 450-0vV
IES: TYPE N MEDIUM
MOUNTING HEIGHT. 30'
Trunnion - RxA-TR (Sold Separately)
IhrA-1503VS41(
IES: TYPE V MEDIUM
10'
b'
0Y ro' . 1D' 0 M W EP ., a0' W' .. .. 0 A' . Ed 0Y
Page 2 of 5
5ARRON'
lighting group
800.533.3948 • vaNvIt arraag.am
Dimensions
Drilling Template (Standard Mount)
A
B
F
O
D
c
Wattage
70/100W
150/25OW
30OW
Light Bars
3
3
6
A
8.5"
12.3"
12.3"
B
19.6"
21.6"
30.3"
C
12.7"
15.2"
23.3"
D
7.0"
7.0"
7.0"
E
7.0"
7.0"
7.0"
F
3.6"
3.6"
3.6"
0
Sensor Details (Option SC and Accessories TL-MSSW and TL-MSSW-REMOTE)
y+t,..
tf•�.f1.>.,4�>a..
. .
so
I rrtl :rYMY�IY Yr
�
SC Option (Factory Installed)
Sensor Dip Switch Settings
TL-MSSW-REMOTE Accessory
TL-MSSW Accessory (Sold Separately)
(Dip Switches on Sensor)
(Sold Separately)
Sensor Settings (Remote)
DETECTION RADIUS/ANGLE
MAX 60'/360°
MOUNTING HEIGHT
MAX 40'
REMOTE RANGE
MAX 33'
FREQUENCY
5.8 gHz
HIGH MODE
70%, 80%, 90%, 100% (DEFAULT 100%)
SENSITIVITY
20%, 50%, 75%, 100% (DEFAULT 100%)
HOLD TIME
10sec, 1 min, 5min, 10min, 15min, 20min, 30min,
60min (DEFAULT 5min)
DAYLIGHT HARVESTING
®, (disabled), 101-ux, 301-ux, 501-ux, 1001-ux,
1501-ux, 2001-ux, 3001-ux (DEFAULT disabled)
STANDBY DIM SETTING
0, 10%, 20%, 30%, OFF (-), (DEFAULT 30%)
STANDBY TIME SETTING (TO OFF)
ON (disabled), 1 min, 30min, 50min (DEFAULT
60min)
Sensor Coverage
Coverage Side View
0' ________________
27'
40'
30' 20' 12' 6' 0' F 12' 20' 30'
360' Coverage
Specifications am subject to change wthout notice.
Installation must be performed in accordance with
Barran Lighting Group installation instructions.
108103T1 Rev 10 08/20
Coverage Top View
EEO1010
r
r
Page 33 ff5
5ARRON'
lighting group
800.533.3948"w w.banonrg.corn
EPA Values
I
*^**
M-M
*%+
Model
1
2 @ 90°
2 @ 120°
2 @ 180°
3 @ 90°
3 @ 120°
4 @ 90°
70W110OW
0.3413
0.5929
0.7983
0.6826
1.0239
1.0499
1.0239
15OW/20OW
0.423
0.735
0.873
0.846
1.158
1.185
1.158
30OW
0.4759
0.7889
1.0581
0.9518
1.2648
1.3711
1.2648
Pole Top Anna
RT2-90-2-BR
Round pole 90° tenon - 2 arms
RT2-120-3-BR
Round pole, 120° tenon - 3 arms
Vertical steel tenon adaptor to mount over
ES
Vertical steel tenon adaptor to mount over
a 2-3/8" O.D. round pole, two arms, 90°.
a 2-3/8" O.D. round pole, three arms, 120°.
Bronze finish.
Bronze finish.
RT2-180-2-BR
RT2-904-BR
Round pole 180' tenon - 2 arms
Vertical steel tenon adaptor to mount over
Round pole, 90° tenon - 4 arms
Vertical steel tenon adaptor to mount over a
a 2-3/8" O.D. round pole, two arms, 180°.
2-3/8" round pole, four arms, 90°. Bronze finish.
Bronze finish.
RT2-90-3-BR
Round pole 90° tenon - 3 arms
Vertical steel tenon adaptor to mount over
a 2-3/8" O.D. round pole, three arms, 90°.
Bronze finish.
Tenon Adaptors
ST4-BR
Square tenon 4"
2-3/8" O.D. steel tenon adaptor to fit into
4" square pole. Includes 4x 5/16" hex
stainless steel bolts. Bronze finish.
RT4-BR
Round tenon 4"
2-3/8" O.D. steel tenon adaptor to fit over 4"
round pole. Not suitable for tapered poles.
Includes 3x 3/8" hex stainless steel bolts.
Bronze finish.
ST5-BR
RT5-BR
Square tenon 5"
Round tenon 5"
2-3/8" O.D. steel tenon adaptor to fit into
2-3/8" O.D. steel tenon adaptor to fit over 5"
a 5" square pole. Includes 4x 5116" hex
round pole. Not suitable for tapered poles.
stainless steel bolts. Bronze finish.
Includes 3x 3/8" hex stainless steel bolts.
Bronze finish.
YM-T-BR
Yoke mount tenon adaptor
O.D. steel tenon adaptor for use with
1
yoke mount accessory. Bronze finish.
yoke
specifications am subject to change wthout notice.
Installation must be perfonnetl in accordance with
Barron Lighting Group installation instructions.
108103T1 Rev 10 08/20
5ARRON'
lighting group
Page 4 of 5
800.533.3948 • wnw.banonlfg.com
Wall Mount Adaptors
WM-T-90-BR
WM-T-S-BR
W3mount tenon
W3mount straight tenon
2-3/ steel O.D. steel tenon adaptor with 90°
2-3/8"O.D. steel tenon adaptor arm for wall
arm for wall mount applications, for use
FU
mount applications, for use with slipfitter
with slipfitter accessory. Bronze finish.
3-1/4 Spacing beween mounting holes.
accessory. Bronze finish.
Specifications am subject to change wthout notice.
Installation must be perfonnetl in accordance Nth
Barron Lighting Group installation instructions.
108103T1 Rev 10 08/20
5ARRON'
lighting group
Page 5 of 5 800.533.3948• vrvv.Dano".com
®TRACELITE®
commercial & industrial lighting
DESCRIPTION
The WLZ Series features an architecturally relevant low -profile LED design in
lumen packages ranging from 1500 lumens to over 12,000 lumens. Its high -
efficiency light engine is designed for optimal light control and distribution
with zero uplight. This family of product is offered in several size housings to
complement any building exterior and accommodates mounting heights up to
35'. Integral emergency battery backup available for path of egress with Cold
Location operation down to -20°C.
SPECIFICATIONS
Construction
• Sleek die-cast aluminum housing with stainless steel hardware and powder
coated black, bronze, silver or white finish
• UV -stabilized polycarbonate optical lens
• Integral heat sink for maximized heat dissipation
• Back box houses drivers away from LEDs and includes three 'a%" hubs
(WLZ1 and WLZ2 - two 3/4" hubs)
Optics/LEDs
• Zero uplight design to minimize light pollution
• 15 to 100 Waft models replace up to 400 Waft HID for up to 70% energy
savings
• Efficacies up to 123 LPW at 5000K to maximize utility rebates
• Type III and Type IV distributions for optimal light distribution
(WLZ1 - Type III only)
• Available in 3000K, 3500K, 4000K and 5000K CCT
• L70 of 50,000 hours at 40°C
• CRI of >_70
Electrical
• Class 2 power supply, 120-277VAC, 50/6OHz
• 3471480VAC Dedicated driver option for WLZ4, WLZ7 and WLZ10
• 0-10V Dimming driver (120-277VAC only)
• Power supply rated Class A EMI rating
Installation
• Housing hinges to back box and is secured with set screws
• Back box is complete with three 'a%" hubs and internal bubble level for
easy installation (WLZ1 and WLZ2 - two 'a%" hubs)
• Mounts to a standard 3-1/2" or 4" square electrical J-box
• Suitable for downlight installation only
Options
•Battery Backup
• Integral battery backup (BB) provides over 700 lumens and 90 minutes of
runtime for path of egress. Rated for ambient temperatures of 0°C to 40°C
(32°F to 104°F). Not available on WLZ1
• Integral Battery Backup with Internal Heater (BB-IH) provides over 700
lumens and 90 minutes of runtime for path of egress in Cold Locations
down to -20°C. Not available on WLZ1 or WLZ2.
• Factory installed dual driver options for WLZ4 and WLZ10
(WLZ7 is standard with two drivers)
• Factory installed 120/277VAC button type photocontrol option (PC)
• Factory installed 10kVA surge protection options (SP or SPH)
Accessories (Field Installed)
• 1201277VAC Button type universal pholocontrol options accessory (PCU)
• Dimming occupancy sensor programmable, Wattstopper FSP221 available in
multiple finishes (TL-SCES-L2)
• Remote control for occupancy sensor. Optional (TL-FSIR100)
Testing & Compliance
• cULus Listed for Wet Locations
• DesignLights Consortium® (DLC) Qualified (verity QPL for
specific models)
• International Dark Sky friendly approved product. (IDA) 3000K only
• Operating temperatures: -40°C to 40°C (-40°F to 104°F)
Warranty
• Five year warranty (terms and conditions apply)
WLZ Series
Zero Uplight LED Wallpack
Model: Data:
Accessories:
Job Name: Type:
I
ida m
-� Wf% WAAAANTV
Specs At A Glance*
Model
WLZ1
WLZ2 I WLZ4
I WLZ7
WLZ10
Wattage (nominal)
15W
25W 40W
70W
1001111
Lumens (Im)
1745
3198 5021
8729
12,393
Efficacy (LPW)
115
118 123
120
116
Equivalency (HID)
50W
10OW 150W
2501-1
40011 IM I
DISMbutlon
Type III, IV (WLZ1 Type III only)
CCT
3000K,3500K,4000K,5000K
CRI
270
Input Voltage
120-277VAC, 50/60Hz, 347/480V option
Operating Temp
-40•C to 40•C (♦0•F to 104°F)
Certifications
UL Listed for Wet Locations, DLC, IDA
Warranty
5 Yeats
Weight
2.61bs 3.3 lbs 6.0 Ibs 1 9.91bs 1 12.11bs
Nominal Wattage, tested at 5000K CCT, Type III distribution. Values at 120/277VAC.
See performance table for more detailed lumen information.
Note: Environment and application will aRect actual performance. Typical values and
25°C (77°c) used for testing. Specifications subject to change without notice.
Specifications m am subject to change accordance
without notice. 5A R R O N'
Installation must be performed to in accordance with ic ��//
Barton Lighting Group installation instructions. lighting group
10810369 Rev 20 Page 1 of 3 800.533. W • w.wv N.Mg.com
Ordering Information (Example: WLZ2-3-4K-BR)
Serles/Contiguratlon
Distribution
Input Voltage
CCT
Finish
Options
WLZ1=15W, Extra -Small
3=Type III
BLANK = 120-277VAC
3K=3000K
BL=Black
BBS=Battery backup
WLZ2=25W, Small
4S=Type IV
HVS3=34714BOVAC
35K'=3500K
BR=Bronze
BB-HO= Cdtl Location Battery badnq(operadon epon to -WC)
WLZ4=40W, Medium
4K=4000K
SV=Silver
DID" =Dual driver
WLZ71 = 70W, Large
5K = 5000K
WH = White
PC = 120/277VAC Button phot=n(rol
WLZ10 = 100W, Extra -Large
SP = 120277VAC Surge protection
SPH = 347/480VAC Sums protection
Notes
1 Standard wiM two divers,
S Not available for WLZ7 oonfguration
a WLZ4, WIZ7 and WLZ70 ony compatible wiM SPH option only
' Consult factory for lead firrles Accessories1s (Field Installed)
a WLZ2, WLZ4, WLZ7 and VULZ10 only. 120277VAC Only Not Compatible with DID and SPH options PCU = 120277VAC Button photocontrol accessory
' WLZ4, WLZ7 and WLZ70 only. 120277VAC Only. Not compatible with DID and SPH options TL-FSIR-100 = Remote Control for TL-SCES sensor (optional)
r Dual driver option available for WLZ4 and WLZ70 only. Not compatible wiM photoconbol option, consul factory TL-SCES-1-2a$ = Motion sensor, white finish
0 Compatible with WLZ4, WLZ7 and VN.Z10 only. Contact factory for compatibility with other options TL-SCES-L2-BLS•'= Motion sensor, black finish
0 Dimming occupancy sensor, programmable, Watfstopper FSP221, L2 Lens TL-SCES-L2-BRa9 = Motion sensor, bronze finish
10 Order as a separate line item. Shipped in separate box for final installation in the field TL-SCES-L2-GRa9 = Motion sensor, gray finish
Performance Data
model
WLZ1-3-3K-XX
15
3000K
Distribution
Type III
Lumen Output (Im)
1531
eacy (LPW)
101
DLC
DLC
WLZ1-3-4K-XX
15
4000K
Type III
1534
101
WA
WLZ1-3-5K-XX
15
5000K
Type III
1745
115
DLC
WLZ2-3-3K-XX
25
3000K
Type III
2795
103
DLC
VAZ23-4K-XX
25
4000K
Type III
2997
111
DLC
VAZ23-5K-XX
25
5000K
Type III
3198
118
DLC
VAZ2-4-3K-XX
25
3000K
Type IV
2609
98
N/A
VAZ2-4-4K-XX
25
4000K
Type IV
2797
105
DLC
VAZ2-4-5K-XX
25
5000K
Type IV
2985
112
DLC
WLZ4-3.3K-XX
40
3000K
Type III
4389
107
DLC
WLZ4-3-4K-XX
40
4000K
Type III
4705
115
DLC
WLZ4-35K-XX
40
5000K
Type III
5021
123
DLC
WLZ4-4-3K-XX
40
3000K
Type IV
4021
98
N/A
WLZ44-4K-XX
40
4000K
Type IV
4310
105
DLC
WLZ445K-XX
40
5000K
Type IV
4599
112
DLC
WLZ7-33K-XX
70
3000K
Type III
7657
105
DLC
WLZ7-3-4K-XX
70
4000K
Type III
8193
113
DLC
WLZ7-35K-XX
70
5000K
Type III
8729
120
DLC
WLZ7-4-3K-XX
70
3000K
Type IV
6837
94
DLC"
WLZ7-4-4K-XX
70
4000K
Type IV
7316
101
DLC"
WLZ7-4-5K-XX
70
5000K
Type IV
7794
107
DLC
WLZ10-3-3K-XX
100
3000K
Type III
10,871
102
DLC
WLZ1034K-XX
100
4000K
Type III
11,632
109
DLC
WLZ103-5K-XX
100
5000K
Type III
12,393
116
DLC
WLZ10-4-3K-XX
100
3000K
Type IV
9706
91
N/A
WLZ10-44K-XX
100
4000K
Type IV
10,385
98
DLC
WLZ10-4-5K-XX
100
5000K
Type IV
11,065
104
DLC
Nominal Wattage. Values at 120/2 AC
"HVS wnfiguration not DLC qualified
Specificationstiam subject to change ordanc wfth 5A R R O Ne
Installation must be perfotreed to c in change
wt out notice.
��//Barron Lighting Group installation instructions. lighting group
10810369 Rev 20 Page 2 of 3 800.533.3958 • w.vHWrrorag.oxn
Dimensions
Sample Photometrics
E�
D
Model
A
B
C
D
E
WLZ1
6.7"
5.0..
5.6"
3.2"
1.4"
WLZ2
8.0..
57"
6.0"
3.2"
1.4"
WLZ4
102"
68"
7.8"
5.0..
1.9"
WLZ7
11.6"
8.3"
9.4"
5.0"
1.9"
WLZ10
11.6"
10.3"
11.5"
5.0"
1.9"
Sensor Details (Accessory: TL-SCES-1-2)
Settings for TL-SCES-1-2
W LZ43-5K
ES : TYPE III VERY SHORT
MOUNTING HEIGHT: 10'
TILT: ZERO
40'
30'
20'
10'
0
10'
20'
30'
40'
40' 30' 20' 10' 0 10, 20' 30, 40'
Side and Top Sensor Coverage Pattern:
With FSP-1-7 lens (included) 360" lens
0'
Settings
Default
High Mode:
0-10V
10V
Low Mode:
Off, 0-9.8V
1 V
Time Delay:
30 seconds; 5-30 minutes
5 Minutes
Cut Off Delay:
None, 1-60 Minutes, 1-5 hours
1 Hour
Sensitivity:
None, Low, Medium, Max
Max
Setpoint:
None, 1-2501c, Auto
Disabled
Ramp Up Time:
None, 1-60 Seconds
Disabled
Fade Down Time:
None, 1-60 Seconds
Disabled
Specifications am subject to change without notice.
Installation must be performed in accordance Nth
Barron Lighting Group installation instructions.
10810369 Rev 20
Page 3 of 3
NOTE:
To change settings in
the field, please order
TL-FSIR-100 controller.
5ARRON'
lighting group
800.533.39e8 • w. Imrmnrg.mm
®TRACELITE®
commercial & industrial lighting
DESCRIPTION
The sleek and compact, energy -efficient AXB Series LED round bollard
provides over 70% energy savings compared to HID technology. The AXB's
applications include lighting pedestrian walkways, retail entryways, as well
as lighting sidewalks around schools, medical complexes, retail entrances,
park/ recreational paths, office buildings, and multi -family properties. The AXB
delivers up to 3,000 lumens with a polycarbonate diffused lens.
SPECIFICATIONS
Construction:
• Die-cast aluminum head and base in a powder coat finish
• Extruded round aluminum body in a powder coat finish
• 42" Height with clean simple aesthetics that fit almost any environment
Optics/LEDs:
• UV stabilized polycarbonate diffused lens providing uniform soft light
• LEDs are pointing down to provide maximum lighting to the ground and
minimize glare
• Vacuum metalized polycarbonate reflector to help diffuse light
•360' Symmetrical distribution
• 26W Unit providing 3000 lumens
• Efficacies of 115 LPW maximize energy savings and utility rebates
-Available in 3000K and 4000K CCT
• L70 >100,000 hours
• Reported L90 of 43,000 hours
•CRI >_80
Electrical:
• Class 2 power supply, 120 to 277VAC, 50/60Hz
• 1-10V Dimming driver
Installation:
• Housing slips over the bollard base and is secured with four set screws
• Bollard base easily slips over anchor bolts and can be leveled using leveling
screws supplied by others
• Four (4) 5/16" x 12.4" anchor bolts, nuts, and washers (included),
2.84" bolt circle
Testing & Compliance:
•cULus Listed for Wet Locations
• Operating temperatures: -40°C to 40°C (-40°F to 104°F)
• DesignLights Consortium® (DLC) Qualified (verify QPL for specific models)
Warranty:
• Five Year Warranty (Terms and Conditions Apply)
Ordering Information (Fxample:AXB-VS-4K-BL)
Model Input Voltage CCT Finish
AXB VS = 120-277VAC 3M = 3000K BL = Black
4K=4000K BR=Bronze
Notes: SV = Silver
' Not a DLC Qualified model
Model:
Accessories:
Job Name:
AXB Series
Round LED Bollard
Date:
Type:
e4L0i(
•,�a a NAA AANTY
Specs at a Glance
Configuration
—imm� *Nominal Wattage (Tested at 000
AXB
YVatiage (W)`
26W
Lumens Om)
3000
Efficacy (LPVV)
115 LPyV
CCT(K)
3000K,4000K
CRI
>_60
Input Voltage
120-277VAC, 50160Hz, 1-10V Dimmable
Operating Tamp
♦0°C to 40•C (-40°F to 104-F)
Certifications
cULus Listed for VY4l Location, DLC
warranty
5 Yeats
Weight
12lbs
Note: Environment and application Will affect performance. Typical values and 25-C
used for testing. Specifications subject to change vdthout notice.
Speafition m am subject to change wthout notice. 5A R R O N'
Installation must be performed in accordance notice.
��//Barton Lighting Group installation instructions. lighting group
10800389 Rev 7 Page 1 of 2 800.533.3W • w.wibar".com
Dimensions
Sample Photometry
42.0°
Base Details
AXB-VS-4K
IES Type VS Short
5fc
20'
3fc
5fc
10fc
10'
0
10'
20'
0 10' 20'
Round
Bollard
Spring
M8x16
Washer
\� m-
Set Screws
M8 SS
Round -
Nuts
Screw
Leveling
Washer
Screws
(by others)
Anchor Bolts
Bollard
Raen
e
specifications m am subject to change mdan t notice. 5A R R O N'
Installation must be periopeed to c in change
wt out oNh ��//
Barron Lighting Group installation instructions. lighting group
10800389 Rev 7 Page 2 of 2 800.53&39e8 • waw.ban".com
NOTE: ACCESSIBLE PARKING SPACES, ACCESS ISLES, AND ACCESSIBLE
S ROAD ROUTE SHALL BE INSTALLED IN ACCORDANCE WITH ICC ANSI A-117.1-09
EEN PHASE I AND THE 2025 VA CONSTRUCTION CODE.
PLEASANT GREEN COMMUNITY BUILDING - LETTER OF REVISION #1 - SITE PLAN
a COLLINSRESENGINEERING
VILL'w1 E VIRGI I N E EOFFICE: 37 R II NG DATE: 7/1/20
22902
2 STREET SUITE c 29 UPDATED: 4/22/21
SCALE: "' = 40'
NOTE: A SHIELD WILL BE PROVIDED FOR Pi TO PREVENT SPILLOVER OF LIGHT k
ONTO THE ADJACENT PROPERTY. THE SHIELD WILL ENSURE THAT THE
LIGHTING DOES NOT EXCEED o.5 FOOTCANDLES AT THE PROPERTY LINE.
1.0 FOOTCANDLES y
r
o.S FOOTCANDLESy
ROPOSED POLE LIGHT (i). , , , , . ,
5 FOOTCANDLES
Luminaire Schedule
Project: Pleasant Green
Symbol
arty.
Label
Description
Arrangement
Lumens/Lamp
LLF
2
P1
BARRON -RXA-zoo-3-VS-3K-BL
POLE LIGHT - SINGLE
25,7001m
2.000
2
P2
BARRON -RXA-zoo-3-VS-3K-BL-A
POLE LIGHT - DOUBLE
25,7001m
2.000
®
2
W
BARRON - WLZ2-3-3K-BL
WALLPACK- SINGLE
2,7951m
2.000
6
B
BARRON- AXB-VS-3K-BL
BOLLARD -SINGLE
3,000 lm
2.000
NOTES:
i. EACH OUTDOOR LUMINAIRE EQUIPPED WITH A LAMP THAT EMITS 3,000 OR MORE INITIAL LUMENS SHALL BEA FULL CUTOFF
LUMINAIRE AND SHALL BE ARRANGED OR SHIELDED TO REFLECT LIGHT AWAY FROM ADJOINING RESIDENTIAL DISTRICTS AND AWAY
P FROM ADJACENT ROADS. THE SPILLOVER OF LIGHTING FROM LUMINARIES ONTO PUBLIC ROADS AND PROPERTY IN RESIDENTIAL OR
`.' RURAL AREAS ZONING DISTRICTS SHALL NOT EXCEED ONE-HALF FOOTCANDLE.
1 2. ALL LIGHTING SHALL COMPLY WITH DARK SKY REQUIREMENTS.
O3. THE SITE LIGHTING SHALL BE WARM WHITE(3000K).
x 4. THE COLOR OF THE LIGHT FIXTURES AND POLES SHALL BE BLACK.
S THE MAXIMUM POLE LIGHT HEIGHT, INCLUDING ANY BASES, SHALL BE 20' IN HEIGHT,
PROPOSED POLE LIGHT(2)
®PLEASANT GREEN COMMUNITY BUILDING - LETTER OF REVISION #1 - LIGHTING PLAN
COLLINS ENGINEERING DATE: 7/2/20
200 GARRETT STREET SUITE K CHARLOTTESVILLE, VIRGINA 22902 OFFICE: 434-293-3729 UPDATED: 4/22/22
SCALE: 2" = yo'