HomeMy WebLinkAboutARB201900068 Checklist 2019-06-14 SIGN REVIEW CHECKLIST with REFERENCES—Wall Sign, Single Business
AR13 19-68,Attic Artifacts
June 14, 2019
REF - CHECKLIST ITEM NOTES .
TYPE
- X 9.b For internally illuminated signs, channel lettering OK.—Reface of existing roof sign
(mounted on a raceway or individual letters) is preferred to
cabinet signs.
X 5.b When channel letters cannot be adequately accommodated,. N/A
internally illuminated cabinet signs may be considered.
X 6 Reader boards are discouraged. None proposed
MATERIALS
X 4.c Materials used in the sign should complement the building OK
being served by the sign..
COLOR
X 4.e Color for raceway-mounted channel letters, the raceway N/A
shall match the wall color.
Sign colors must be harmonious with each other. Issue: Does not meet existing CSC for sign background
color.
Sign colors must not clash with the site,when viewed in OK
daylight and at night.
Overly intense color, (such as dayglo or fluorescent OK
colors), are prohibited.
Use of three colors or less (black and white considered as OK—meets approved CSC allowing 5 colors.
colors)
Additional colors may be approved if they contribute to the
sign balance/unity.
• SIZE, SCALE,PROPORTION,AND LOCATION
X 4.b Signs may not exceed the size, height and setback OK—reface
requirements as outlined in Section 4.15 of the Albemarle
1
5
REF CHECKLIST ITEM NOTES
County Zoning Ordinance (unless sign has a variance).
X Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall. OK—reface
A.A area is a good working proportioning system for placing a
sign.
X Appendix Color,.form, surface pattern, shape, and disposition of OK reface
A.A.4 elements and openings in an architectural design can affect
our perception of scale and can impact the appearance of a
sign on a building.
X 9.d The wall sign's size must coordinate with the architectural OK-reface
element's size.
The sign should not over-crowd the architectural element, OK
the wall, or the sign area.
Buildings and building elements should not be used as OK
billboards.
X 9.a . Wall signs must integrate with the building's architecture. OK—reface
The sign placement should not obscure architectural OK
features or details, (such as cornices, windows, columns,
pilasters and paneling). -
X 9.d An appropriate height for channel letters in a 30" high sign N/A
band is 18".
This allows 6" of unoccupied space above and below the
letters.
4 of clear space above, below, and to the sides of a
channel letter sign is considered a minimum, with larger
clearances required for larger sign.bands.
Degree of visibility, the distance from the Entrance
Corridor, .and the architectural design of the building/area
2
REF CHECKLIST ITEM NOTES
will determine sign size, placement, and proportions.
X 4.d Lettering should be in proportion (font size and typeface OK
style)to the sign and the building.
Use of three typefaces or less. OK—2
Additional typefaces may be approved if they contribute to
a balanced/legible/unified sign design.
X 9.e.iv The width of the outline.must be in proportion to the width None proposed
of the letter.
An outline width of 1/8" has been found to be an
appropriate sign dimension.
TRADEMARKS, CORPORATE LOGOS AND GRAPHICS
X 4.f The ARB may require that the color and scale of standard None proposed
templates for trademarks, service marks, corporate logos
and graphics be modified.
When used,trademarks,.service marks, corporate logos
and/or graphics should be incorporated as an integral part
of the overall sign.
• o • 5.a External (or no).illumination is preferred for approved
graphics/logos; .
o 5.b • internal illumination may be considered for approval on a
case-by-case basis.
LIGHTING
o • 9.e.i External (or no) illumination is preferred for wall signs.
o • .5.f Any internal illumination is considered to contribute to
Visual clutter and will be limited..
3
REF CHECKLIST ITEM NOTES
El - 5.c Internal illumination design approval will be evaluated On
size, balance, complexity, and distance from the Entrance
Corridor.
o. 9.e.iv The backgrounds of such cabinet signs must be made
opaque (zero light transmission). . .
❑ 5.e External illumination should be shielded and not create
glare.
All external light sources shall be white.
Sign lighting (external) should- be shielded so that it
illuminates only face of the sign and does not shine beyond
the edge of the sign.
o 9.iii Channel letters with translucent faces must have no light
spilling outward from the top; bottom, sides or back.
Faces and returns of channel letters shall be opaque when
back-lit(halo-lit).
o 9.iv Cabinet signs shall have a non-illuminated background, or
an opaque (zero light transmission)background.
Cabinet signs shall be constructed such that no light spills
outward from the top, bottom, sides or back.
❑ 5.g All illumination shall be non-blinking.
❑ 5.h. An exposed light source that forms the body of.a sign,
(such as exposed neon signs),.shall not be used in the
Entrance CorridOrs.
ARB ACTIONS
❑ If LED lighting is proposed the sign drawing must state
The level of illumination provided by the LED lights will
not exceed the illumination produced by a single stroke of
30 milliamp (ma) neon.
❑ Action on ARB-P Red acrylic#2283 has been determined to be an
4
REF CHECKLIST ITEM NOTES
S
(BP)200.1.-12 inappropriate color for signs. Pantone color match
Wood Grill for.2283 is 485C. Red#2793 has been approved
as an acceptable substitute. Pantone color match
for 2793 is 187C. (See below.)
12/21/15 action on Generally, for signs in the Entrance Corridors,red 485
ARB 2015-114& - may be acceptable on a case-by-case basis as a
1.15 Shell Signs secondary color.
ARB Visual clutter resulting from adjacency, for example at the
Action Hardee's locations, is a reasonable basis for not allowing
Memo: illumination of the.graphic.
5/7/12
ARB Accent color letters can be used in a sign when portrayed
Action as a-graphic,up to 33%of the length of the sign.
Memo:
8/3/2015
5