HomeMy WebLinkAboutARB202100017 Checklist 2021-02-04 Completeness Check for-,signs
Project#/Name: ARB-2021-17:Aldi Sign
Date Received at County: 1/27/21
Date Received in Design Planning: 2/2/21
Date of Checklist Check:2/4/21 Assigned to/Date:MM 2/4/21
FEES
3. ARB Review—Will the permanent sign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for'a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00
Comprehensive Sign Review. See ARB requirements next pages.)
® Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked:in sections 1—3): $
FREESTANDING SIGNS
A. Submittal Requirements
® Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions.Sign structure
already exists.
® Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
® If the sign will be located in an easement,a letter of approval from the easement holder will be required.
® A to-scale color illustration of the proposed sign showing
® Dimensions of the sign,including overall height from the ground;cabinet size,length,width and depth;base
size,etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
® Proposed lettering and/or graphics in their proposed location.
❑ Entrance Corridor.Requirements:If the sign is to be constructed in an Entrance Corridor,also provide a color
illustration of the front and side elevations of the sign showing:
\ /If internally illuminated,indicate which areas of the sign are opaque and which are illuminated:Internally
v illuminated cabinet signs must have opaque backgrounds.(Opaque materials don't allow light to pass through.
When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.)
19 Identification of proposed materials and colors.Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for all materials,text,graphics,base,faces,trim caps,returns,etc.
vi Provide accurate physical samples of all colors proposed,preferably in the material:proposed.(Paint chips that
accurately reflect the proposed colors are acceptable.)Pantone and SW colors ID'd
ty Provide a site plan showing proposed landscaping around the sign,including,botanical names and planting sizes.
sign structure already exists.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary.(The
applicant will be notified if this requirement applies.)
WALL SIGNS
VA drawing,to scale,showing dimensions of the sign(length,height,depth).
Elevation drawing(s)or modified photograph of the entire building,to scale and in color,showing
fs/The sign 1ieAion on the building,sign hcigl�t above grade,and the length of building frontage.(Be sure to also
include these dimensions on the diagrams provided in Appendix B.)
Illi Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
VIndication of sign type(chan416ters,cabinet,panel,etc.).
o dicate on the drawings the proposed materials and colds.Include standard color identification numbers
(P)he,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps,etc.For channel letter
signs,indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
iProvide accurate physical samples of all colors proposed in the sign,preferably in the material proposed.(Paint
chips that accurately reflect the proposed colors are acceptable.)
Location of proposed light fixtures and manufacturer cut sheets describing illumination type,intensity,style,
shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
LIFor internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated.(Opaque
materials don't allow light to pass through.When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
lEr The location of proposed light fixtures identified on a plan and/or elevation
Manufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height.All lighting must
" meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
application is complete