HomeMy WebLinkAboutARB202100086 Checklist 2021-07-30 Completeness Check for Signs r�
Project#/Name: l/Z6 d Ft v w T) /
Date Received at County: - 7(7-6/Z(
Date Received in Design Planning:
Date of Checklist Check: —743 0 C Assigned to/Date: /
FEES
3. ARB Review— Will the permanent sign(s)be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $129.00
Comprehensive Sign Review. See ARB requirements next pages)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee
Comprehensive Sign Review See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $0.00
FEE TOTAL(Please add all the amounts checked in sections 1—3): $
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ If the sign will be located in an easement,a letter of appr.val from the easement holder will be required.
❑ A to-scale color illustration of the proposed sign : owing
❑ Dimensions of the sign,including overall eight from the ground;cabinet size,length,width and depth;base
size,etc. (Be sure to also include these di nsions on the diagrams provided in the Sign Permit Application packet)
❑ Proposed lettering and/or graphics their proposed location.
❑ Entrance Corridor Requirements: the sign is to be constructed in an Entrance Corridor,also provide a color
illustration of the front and side e vations of the sign showing:
o If internally illuminated,i •icate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet sign ust have opaque backgrounds.(Opaque materials don't allow light to pass through.
When lit only from b- md,the color of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of pr.I osed materials and colors.Include standard color id numbers(Pantone,Benjamin Moore,
Acrylic,etc.)for 1 materials,text,graphics,base,faces,trim caps,returns,etc.
o Provide occur. physical samples of all colors proposed,preferably in the material proposed.(Paint chips that
accurately re'ect the proposed colors are acceptable.)
o Provide a s' e plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additiona ubmittal materials may be required if review by the Architectural Review Board is necessary.(The
applicant will be notified if this requirement applies.)
WALL SIGNS
A dra ,to scale,showing dimensions of the sign(length,height,depth).
Elevation drawing(s)or modified photograph of the entire building,to scale and in color,showing
tzEThe sign location on the building,sign height above grade,and the length of building frontage.(Be sure to also
include these dimensions on the diagrams provided in Appendix B)
Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Indication of sign type(channel letters,cabinet,panel,etc.).
o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers
(Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps,etc.For channel letter
signs,indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
o Provide accurate physic. sample of all colors proposed in the sign,preferably in the material proposed.(Paint
chips that accurately re - - sroposed colors are acceptable.)
p/Location of proposed light fixtures and manufacturer cut sheets describing illumination type,intensity,style,
shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17.
o/ For internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated.(Opaque
J/ materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be
detected nor can objects be seen through it.)
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures identified on a plan and/or elevation
❑ Manufacturer cut sheets describing illumination type,intensity,style,shielding,color,and height.All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: