The URL can be used to link to this page

Home My WebLink AboutARB202100087 Checklist 2021-07-30 Completeness Check for Signs� Project#/Name: 4a ZXJ I 7 (t0t1 ,)C Date Received at County: 2( / ( Date Received in Design Planning: Date of Checklist Check: "7C 3 '/ / Assigned to/Date: /1M FEES 4g/e7( seK ,/J'j %) 3. ARB Review— Will the permanent sign(s)be constructed in an E ' -ce Corridor? (See the Entrance Corridor map in the Sign Permit Application .- •t for a list of Entrance Corridors) ❑ Yes (This sign will be constructed in an ntrance Co 'or and it does not meet the conditions of a $129.00 Comprehensive Sign Review. See A : requi-•ments next pages) ❑ Yes (This sign will be constructed in an t tr. ce Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review See A' equirements next pages) ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL(Please add all the amounts checked in sections 1—3): $ FREESTANDING SIGNS A. Submittal Requirements Site plan or latest approved plat showing,to scale,the proposed location of the sign(s)with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way. ❑ If the sign will be located in an easement,a letter of approval from the easement holder will be required. ❑ A to-sc le color illustration of the proposed sign showing Dimensions of the sign,including overall height from the ground;cabinet size,length,width and depth;base size, tc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet) oposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor,also provide a color illustration of the front and side elevations of the sign showing: internally illuminated,indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds.(Opaque materials don't allow light to pass through. When lit only from behind,the color of an o..•.e material cannot be detected nor can objects be seen through it.) o Identification of proposed rials an. olor nclude standard color id numbers(Pantone,Benjamin Moore, Acrylic,etc.)for all mate is t , aph , •ase,faces,trim caps,returns,etc. o Provide accurate physic sam I f all colors proposed,preferably in the material proposed.(Paint chips that accurately reflect the pro e co rs are acceptable.) �ovide a site plan showing prop ed landscaping around the sign, including botanical names and planting sizes. o Additional submittal materials ay be required if review by the Architectural Review Board is necessary.(The applicant will be notified if t s requirement applies.) WALL SIGNS v1A drawing,to scale,showing dimensions of the sign(length,height,depth). Elevation drawi�ng(s)�or modified photograph of the entire building,to scale and in color,showing El The sign to t�ion on the building,sign hei t above grade,and the length of building frontage.(Be sure to also include these dimensions on the diagrams provided in Appendix B) frSign lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: Vindication of sign type(channel letters,cabinet,panel,etc.). o Indicate on the drawings the proposed material's and col s. Include standard color identification numbers (Pantone,Benjamin Moore,Acrylic,etc.)for all materials,text,graphics,faces,trim caps,etc.For channel letter signs,indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. o Provide accurate physi 1 sampl of all colors proposed in the sign,preferably in the material proposed.(Paint chips that accurately r e propo ed colors are acceptable.) o Location of proposed light fi res and manufacturer cut sheets describing illumination type,intensity,style, shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17. o For internally illuminated signs,indicate which areas of the sign are opaque and which are illuminated.(Opaque materials don't allow light to pass through. When lit only from behind,the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS CAI The ation of proposed light fixtures identified on a plan and/or elevation Manufacturer cut sheets describing illumination type, intensity,style,shielding,color,and height.All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: TEAS: p� 's _ '0 /�J 7 t -,2 1 , .�{6 "�dC�►�� r/)�K.l�t/ /i t' fd'Y-