HomeMy WebLinkAboutARB202100108 Checklist 2021-09-15 (2)Completeness Check for Signs
Project #/Name: ARB2021-108 Ivy Rehab
Date Received at County: 9/2/21
Date Received in Design Planning:
Date of Checklist Check: 9/14/21 Assigned to/Date: NIM114
9/14/21: Fee not paid; fee paid
9/14PM
FEES
3.
ARB Review — Will the permanent sign(s) be constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
es (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a
$129.00
Comprehensive Sign Review. See ARB requirements next pages.)
❑
Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions ofa
Waive Fee
Comprehensive Sign Review. See ARB requirements next pages.)
❑
No (This sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3):
$
WALL SIGNS
�rawmg, to scale, showing dimensions of the sign (length, height, depth).
levation drawing(s) or modified photograph of the entire building, to scale and in color, showing
eThe sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also
include these dimensions on the diagrams provided in Appendix B.)
01-�Sign lettering and/or graphics in their proposed location.
Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Indication of sign type (channel letters, cabinet, panel, etc.).
low Indicate on the drawings the proposed materials and colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
/attached.
^ems Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
o Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
r internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
Cl.-,'Ke location of proposed light fixtures identified on a plan and/or elevation
Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.