HomeMy WebLinkAboutARB202100141 Checklist 2022-02-09Completeness Check for Signs
ARB2021-141: Albemarle Countertop freestanding sign
Date Received at County: 12/7/21
Date Received in Design Planning:
Date of Checklist Check: 12/14/21
Assigned to/Date: MM
Complete 12/14/21
FEES
3. ARB Review — Kill the permanent sign(s) be constructed in an Entrance Corridor?
(See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $see new fees
Comprehensive Sign Review. See ARB requirements next pages.)
❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a $see new fees
Comprehensive Sign Review. See ARB requirements next pages.)
❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3): $
I FREESTANDING SIGNS I
A. Submittal Requirements I
plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
from the sign to the property lines and/or edge of the VDOT right-of-way.
sign will be located in an easement, a letter of approval from the easement holder will be required.
❑ A to -scale color illustration of the proposed sign show' g
❑ DimePsiioof the sign, including overall h ' from the ground, cab' size, length, width and depth, base
size, P (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
❑ Proposed letterin� graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color
illustration of the front and side elevations of the sign showing:
o If inter' illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through.
When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of proposed maqSWand o ❑clude standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc.
o Provide accurate physical saof all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptabl
o Provide a site plan showing proposed la scapmg around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
❑ A awing, to scale, showing dimensions of the sign (length, height, depth).
❑ Eleva drawing(s) or modified photograph of the entire building, to scale and in color, showing
❑ The si location on the building, sign height above grade, and the length of building frontage. (Be sure to also
include th dimensions on the dia ams provided in Appendix B.)
❑ Sign letterin d/or graphics in their proposed location.
❑ Entrance Corridor Re uirements: If the sign is to be constructed in an Entr a Corridor also provide a color
illustration of the front an ide elevations of the sign showing:
o Indication of sign type (c el letters, cabinet, panel, etc.).
o Indicate on the drawings the p used materials and colo . nclude standard color identification numbers
(Pantone, Benjamin Moore, Ac 'c, etc.) for all mater' s, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that raceway co shall match the color of the wall to which the raceway is
attached.
o Provide accurate physical samples of al rs proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the pro d col o are acceptable.)
o Location of proposed Gght fi res and manufic r cut sheets describing illumination type, intensity, style,
shielding, color, and hei 11 lighting must meet or ' ce requirements as outlined in Section 4.17.
o For internally illuminated signs, indicate which areas of the ' n are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from hind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
e location of proposed light fixtures identified on a plan and/or elevation
❑ urer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: