HomeMy WebLinkAboutSDP199500005 Checklist 1995-01-25 COUNTY OF ALBEMARLE
IV. FINAL SITE DEVELOPMENT PLAN
CHECKLIST
PROJECT NAME: I—/ 7
TAX MAP(S) AND PARCEL NUMBER(S):
PLAN TITLE:
FIRM AND INDIVIDUAL PREPARING THE SUBMITTAL:
In representing the above referenced firm submitting this final plan for approval, I hereby certify that I have reviewed
the attached plan and find it complete as to submittal criteria.
I also certify that I have met with and/or discussed the attached plan with all the following agencies and have their
tentative approvals at the time of this submittal:
❑ Department of Planning and Community Development
❑ Department of Engineering
❑ Department of Zoning
❑ Department of Inspections- Fire Official Approval
❑ Albemarle County Service Authority
Signature of Submittal Agent Date:
The following information shall be provided by the applicant.
A. PROFESSIONAL REQUIREMENTS:
❑ 1. Except as otherwise expressly provided by law under Title 54, Chapter 3 of the Code of Virginia, all
final plans submitted for approval shall be prepared by an Architect, Land Surveyor, or Certified
Landscape Architect, duly licensed in the State of Virginia. The professional seal and signature of the
individual assuming responsibility for the design shall be affixed to the final plan.
B. FILING REQUIREMENTS:
❑ 1. Minimum accuracy standards: Boundary, setback, zoning - 1 foot:10,000 feet; Existing contours-
1/2 of required contour interval; Proposed contours- 1 foot horizontally&vertically; Spot elevations -
0.1 foot; Existing structures and features-2 feet, critical structure-0.1 foot; Proposed improvements
-0.1 foot.
❑ 2. Fourteen (14) cleariy legible blueline or blackline copies.
❑ 3. Six (6) copies of landscape plan.
37
❑ 4. Plan scale of 1 inch equals 20 feet or as app.oved by agent. No sheet to be larger than 42 inches
by 36 inches,with a sheet size of 24 inches being the preferred size. If more than 1 sheet, match lines
must be indicated.
❑ 5. All off-site easements have been acquired.
C. TITLE BLOCK IDENTIFICATION:
ti 1.Signature panels for Department of Planning and Community Development,Department of Engineer-
ing, Department of Zoning, Fire Officer, Albema.le County Service Authority, Virginia Department of
Health, Virginia Department of Transportation.
f
2. Name of development.
2811,3. •‹---❑ 3. Name of owner/developer.
l 4. Name of individual or firm who prepared the plan.
r ❑ 5.Tax Map and Parcel Number.
'‘ ❑ 6. Zoning. '
2rcQ% 4' ❑ 7. Description of variances, zoning proffers and bonus factors which are applicable to the site.
F ❑ 8. Magisterial District.
E❑ 9. County and State.
E/ 10. North Point.
�ti
t.J 11. Scale.
E" ❑ 12. Datum used and a benchmark reference.
< ❑ 13. Source of topography.
‘ 14. Source of survey. — nv}r_ - 1 'c.onit .r, £leva °''l-' ' ry,c,rpec� as 28 apP�a µ°'f '1" sl +E1 79d
El
15. Sheet number and total number of sheets.
Z 16. Date of drawing.
< ❑ 17. Date and description of latest revision.
18. Owner, zoning, tax map, parcel number, departing lot lines and present use of adjacent parcels.
F-❑ 19. Minimum setback lines, yard and building separation requirements.
❑ 20. Vicinity map at scale of 1 inch equals 2,000 feet.
o'
❑ 21. Boundary dimensions (metes and bounds).
,ry - Pro"ck ,h.ens.0". fn bouvd
D. PROJECT DESCRIPTION:
E 1. Written schedule or notes. (See Section 32.6.6.a.)
E 2. Indicate if sale or rental units.
E 3. Number bedrooms per unit.
rE 4. Number units per building.
lC 5. Recreation facilities specifications.
'IQ
E. EXISTING CONDITIONS/PROPOSED IMPROVEMENTS:
pane, (comet❑ 1. Proposed grading (maximum 2 foot contours) up to 20%; (maximum 5 foot contours) over 20%.
k ❑ 2. Detailed water and sewer plans required by the Albemarle County Service Authority.
❑ 3. Detailed construction of drainage and grading plans:
❑ a. For all proposed ditches and channels show existing and proposed grades, invert of ditches,
cross pipes or utilities; typical channel cross section for new construction; and actual cross
sections for existing channels intendea to remain.
❑ b. Profiles of all storm sewer systems showing existing and proposed grades.
❑ c. Plan view of all drainage systems with all structures, pipes and channels numbered or lettered
,��y on the plan and profile views. Show sufficient dimensions and benchmarks to allow field stake
\ out of all proposed work from the boundary lines.
❑ d. A drainage summary table for culverts, storm, sewer and channels [see 32.6.6.d(4)].
/ ❑ e. A legend showing all symbols and abbreviations used on the plan.
❑ f. General notes, typical sections, and details of all items not covered by Virginia Department of
Transportation standard drawings.
El g. Flood plain limits for the 100 year storm for all watercourses that have a drainage area of 100
acres or more.
❑ 4. Typical street section; centerline curve data, radius of curb)returns or edge of pavement; location,
t type, and size of proposed ingress/egress to/from the site; together with culvert size; symmetrical
s< Ve. �yQ" transition of pavement at intersection with existing street;the edge of street surface or face of curb for
t 1N'` full length of proposed street; when proposed streets intersect with or adjoin existing streets or
o travelway together with curb and gutter indicated for a minimum of (100) feet or the length of
connection, whichever is the greater distance.
Pay ❑ 5. For all parking and loading areas indicate: size; angle of stalls; width of aisles and specific number
Nor vo of spaces required and provided and method of computation. Indicate type of surfacing for all paved
Ni4or gravel areas.
a
39