HomeMy WebLinkAboutARB202200034 Application 2022-03-30n+ov,vyGJ
Application and Checklist fnr Cioln Permit aiS
Part A: Applicant and Parcel Information ��ppyy��
Project Name: L'S Uri.\kCY�7yt. Address: AW Rlp
Tax inap and reels • m�( Zoning: /) ��
Contact (Who should we call w/ questiio/m?) Name: M �y -A `U—AMA Business Name: (;rqt StVA
Address Sev-"44e (r City C6w6-#e-,rYY! Re- state_Zip_�8[
Daytime Phone ( _� ! gg g� Fax # L) E_ataij %u ic6u
Contractor Name: _ 6-410 d 74'�`N��&V B'usinests Na'me: �YCQLA610U-� yk IA (M
Address � rj �t{ j�.(Up� ix City G NcS iA (4—> state V4— Zip
Daytime Phone U "9{3) v W Fax # Email
Business Owner Name: Business Name:
Address City State Zip
Daytime Phone (—� Fax # (_) E-mail
Part B: Determining application requirements and fees (includes 4% Technology Surcharge)
NOTE: Fees are calculated PER SIGN. .Ifyou have 2 or more signs, fin out separate applications for each sign.
1.
Sign Permit - Please indicate which sign type you are applying for:
❑
Freestanding or Monument Sign:
$123.30
❑
If a footing is required, an additional fee is required:
$54.06
eWall
Sign (Including property, awning, fuel pump canopy signs) Up to three wall signs per establishment may
$123.30
be included on one permit meeting applicable size requirements. Only onefee for all three wall signs will be assessed.
❑
Sign Refacing:
$85.60
Electrical Permit - Will the sign be illuminated?
,2,..
�l
Yes (Illuminated signs require an electrical permit and an electrical schematic.)
$73.14
❑
No
$ 0.00
3.
ARB Review- Will the permanent sign(s) be constructed in an Entrance Corridor?
(Go to hnos-//www.albemarl org/government/cominwity-develoomengadvisory bouds/arebitectural review board for more information)
❑
Yes (ReviewbyArchitecturalReview Board. See ARB requirements nertpages.)
$147.68
❑
Yes (Review by ARB Staff: See ARB requirements nestpages.
$135.20
❑
Yes Resubmittal of a sign application
$ 67.60
❑.
No (n7 sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL (Please add all the amounts checked in sections 1- 3):
$
FOR OFFICE USE ONLY BP# ARB#
Fee Amount $ Date Paid By who? Receipt # Check # By
County of Albemarle Community Development Department
401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 9724126
www.albemarie.ore 08/2021 Page 1 of
It
Part C: Submittal Items Required
Note: Submittal packages must contain 4 collated copies of all information unless otherwise indicated. Additional submittal
materials may be required if review by the Architectural Review Board is necessary. Applicants will be notified if additional
materials or ARB review are required.
SECTION 1, FREESTANDING, SUBDIVISION OR DIRECTORY SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ Provide written authorization from the Albemarle County Service Authority (ACSA) for an approved location.
❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required.
❑ A footing/foundation diagram showing bow the base or pole will be anchored in the ground.
❑ A to -scale color illustration of the proposed sign showing
❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base
size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet)
❑ Proposed lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: Signs in the Entrance Corridors must conform to the Entrance Corridor Sign
Guidelines and approved Comprehensive Sign Plans. Go to )ems'//www abemarle org/Povemment/community-
development/advisory-boards/architectuml-review-board for more information. Provide a color illustration of the
front and side elevations of the sign showing:
o If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through.
When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc.
o If colors other than Pantone equivalents are identified, provide accurate physical samples of all colors proposed,
preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this reguirement a lies.
B. Inspection Requirements for Freestanding, Subdivision or Directory Signs
❑ Applicant must mark the location of the property lines and the location of the sign with stakes in preparation for a
preliminary zoning inspection. (All four corners of the sign must be marked with stakes that are easily visible to all
inspectors)
❑ A preliminary zoning inspection must be completed to verify the location of the sign before the permit can be
issued.
❑ Freestanding signs are required to have footing inspections. (scheduled by applicant)
❑ Freestanding signs are required to have electrical inspections if illuminated. (scheduled by applicant)
❑ Freestanding signs are required to have final building and zoning inspections. (scheduled by applicant)
County of Albemarle Community Development Department
401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 972-4126
www.albemarle.org 08/2021 Page 2 of
I SECTION 2: WALL SIGNS I
A. Submittal Requirements
n'' �A drawing, to scale, showing dimensions of the sign (length, height, depth).
9 Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing
Bl"Ibe sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also
11 include these dimensions on the diagrams provided in Appendix B.)
Eign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: Signs in the Entrance Corridors must conform to the Entrance Corridor Sign
Guidelines and approved Comprehensive Sign Plans. Go to hgps://www.albemarle.org/government/community-
develooment/advisorv-boards/architectural-review-board for more information. Provide a color illustration of the front
and side elevations of the sign showing:
o Indication of sign type (channel letters, cabinet, panel, etc.).
o Indicate on the drawings the proposed materials and colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
o If colors other than Pantone equivalents are identified, provide accurate physical samples of all colors proposed
in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are
acceptable.)
o If externally illuminated, indicate the location of proposed fight fixtures and provide manufacturer's cut sheets
describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance
requirements as outlined in Section 4.17.
o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
_ detected nor can objects be seen through it. Internally illuminated cabinets must have opaque backgrounds.)
B. Inspection Keguirements for Wall or Projecting Signs
Ej� Wall and projecting signs are required to have electrical inspections if illuminated. (Scheduled by applicant)
Ef-Walt and Projecting signs are required to have final building and zoning inspections. (Scheduled by applicant)
SECTION 3: ILLUMINATION REQUIREMENTS
A. If the proposed sign is to be illuminated, the applicant must provide the following:
❑ Electrical permit
Electrical schematic
❑ The location of proposed light fixtures identified on a plan and/or elevation
❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting
must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
❑ Manufacturer cut sheets describing illumination type, intensity, sile, shielding, color, and height. All lighting
must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
County of Albemarle Community Development Department
401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 9724126
www.albemarle.ors 0812021 Page 3 of
SECTION 4: WORK VALUATION
A. Work Valuation
4t
Part D: Applicant Agreement
Applicant must read and sign
• Each application package must contain 4 folded copies of all plans and documents being
submitted Only 1 set of
material/color samples is required. All submittal items become the property of Albemarle
County. Applicants are
encouraged to maintain duplicate copies in their own files.
• The application package is not complete without this checklist, completed, sigue
d, and included with the required
submittal materials indicated on the checklist.
I hereby certify that the information provided on this application and accompanyir
correct to the best of my kn ledge and be 'ef and contains all information requin
g information is accurate, true and
d by these checklists
O
Signature of per c pleting checklist Date
U..yco�
number of Signatory
Printed Name / Title Daytime photie
I
County of Albemarle Community Development Department
401 McIntire Road Charlottesville, VA 22902 Voice: (434) 296-5832 Fax: (434) 972-4126
www.albemarle.org 082021 Page 4 of 4