HomeMy WebLinkAboutARB202200025 Checklist 2022-04-11 (2)Completeness Check for Signs
Project #/Name: ARB 2022-25 Pantops Tarot Sign
Date Received at County:
Date Received in Design Planning:
Date of Checklist Check: 3/28/22 Assigned to/Date: MM
FEES
3. ARB Review — PF[l the permanent sign(s) be constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB. $147.68
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff. $135.20
❑ Yes This is a resubmittal of a sign application. $ 67.60
❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3): $
I FREESTANDING SIGNS I
I A. Submittal Requirements I
❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. Sign is
existing.
Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
ZJ,4f the sign will be located in an easement, a letter of approval from the easement holder will be required.
❑ A to-s ale color illustration of the proposed sign showing
Dimensions of the sign, including overall height from the ground, cabinet size, length, width and depth, base
s , etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.)
Proposed lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color
illustration of the front and side elevations of the sign showing:
�-s If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through.
When lit only from behind, color of an opaque material cannot be detected nor can objects be seen through it.)
v4 Identification of propo d aterials co o s. I clude standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materials, text, grap tcs, a e, faces, trim caps, returns, etc.
o Provide accurate phys a samples all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect the propose colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.) Sign is existing. Proposal is to replace a tenant panel.
WALL SIGNS
❑ A drawing, to scale, showing dimensions of the sign (length, height, depth).
❑ Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing
❑ Th ign location on the building, sign height above grade, and the ngth of building frontage. (Be sure to also
inclu rese dimensions on the dia ams provided in Appendix B.)
❑ Sign letters and/or graphics in their proposed location.
❑ Entrance Corridor Req cuts: If the sign is to be co trncted in an Entrance Corridor also provide a color
illustration of the front and side vations of the signs wing:
o Indication of sign type (channel lette abi , panel, etc.).
o Indicate on the drawings the proposed teria d colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic tc.) for all mate ' text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing th the raceway color shall the color of the wall to which the raceway is
attached.
o Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
o Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures identified on a plan and/or elevation
❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: