HomeMy WebLinkAboutARB202200034 Checklist 2022-05-04Completeness Check for Signs complete 4/8/22
Project #/Name: ARB2022-32: Burlington Sign
Date Received at County: 3/30/22
Date Received in Design Planning: 4/5/22
Date of Checklist Check: 4/8/22 Assigned to/Date: MM
FEES
3.
ARB Review — PF[l the permanent sign(s) be constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
$147.68
�❑
yJ
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
$135.20
❑
Yes This is a resubmittal of a sign application.
$ 67.60
❑
No (This sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3):
$
I FREESTANDING SIGNS I
I A. Submittal Requirements I
❑ Site plan or st approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ Distance from the,,sign to the property lines and/or edge of the VDOT right-of-way.
❑ If the sign will be to ted in an easement, a letter of approval from the easement holder will be required.
❑ A to -scale color illustration the proposed sign showing
❑ Dimensions of the sign, inclu ' g overall height from the ound, cabinet size, length, width and depth; base
size, etc. (Be sure to also include the dimensions on the ih ams provided in the Sign Permit Application packet.)
❑ Proposed lettering and/or graphics in it propo location.
❑ Entrance Corridor Requirements: If the sign i e constructed in an Entrance Corridor, also provide a color
illustration of the front and side elevations of sign owing:
o If internally illuminated, indicate whic eas of the si opaque and which are illuminated. Internally
illuminated cabinet signs must hav ague backgrounds. (Op materials don't allow light to pass through.
When lit only from behind, the or of an opaque material cannot be detected nor can objects be seen through it.)
o Identification of proposed aterials and colors. Include standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc.
o Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
A drawing, to scale, showing dimensions of the sign (length, height, depth).
Ellcva�tion drawing(s) or modified photograph of the
entire building, to scale and in color, owing
� r ne sign lefation on the building, sign heigki above grade, and the length of b ding frontage. (Be sure to also
elude these dimensions on the dia •ams provided in Appendix B.)
Sign lettering and/or graphics in their proposed location.
Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Le'/Indication of sign type (channel letters, cabinet, panel, etc.).
o icate on the drawings the proposed materials and colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
VI -Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
%0,ocation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
relding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
❑ The location of proposed light fixtures ' ❑tified on a plan and/or elevation
❑ Manufacturer cut sh is des g illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: