HomeMy WebLinkAboutARB202200013 Checklist 2022-05-05 (2)Completeness Check for Signs
Project #/Name: ARB-2022-13: Reines & Rogers Jewelers Sign
Date Received at County: 2/3/2022
Date Received in Design Planning: 2/4/22
Date of Checklist Check: 2/4/22 Assigned to/Date:
COMPLETE
FEES
3.
ARB Review — PF[l the permanent sign(s) be constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
$147.68
C7
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
$135.20
❑
Yes This is a resubmittal of a sign application.
$ 67.60
❑
No (This sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3):
$
FREE§TANDING SIGNS
A. Subr al Requirements
❑ Site plan or la t approved plat showing, to scale, the propose location of the sign(s) with dimensions.
❑ Distance from the ' to the property lines and/or edge ofVDOT right-of-way.
El If the sign will be loca in an easement, a letter of appro al from the easement holder will be required
❑ A to -scale color illustration o e prX
d sign sho ing
❑ Dimensions of the sign, inclu 'over hei from the ground; cabinet size, length, width and depth; base
size, eta (Be sure to also include thension on the diagrams provided in the Sign Permit Application packet)
❑ Proposed lettering and/or grapheir roposed location.
❑ Entrance Corridor Requirements: i to be constructed in an Entrance Corridor, also provide a color
illustration of the front and side elevo the showing:
o If internally illuminated, indicateareas of sign are opaque and which are illuminated. Internally
illuminated cabinet signs must haque backgro s. (Opaque materials don't allow light to pass through.
When lit only from behind, the can opaque mater cannot be detected nor can objects be seen through it.)
o Identification of proposed mat/te�
d colors. Include stan color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materialsphics, base, faces, trim cap , etums, etc.
o Provide accurate physical samf all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
A drawing, to scale, showing dimensions of the sign (length, height, depth).
ICVation drawing(s) or modified photograph of the entire building, to scale and in color, showing
The si cation on the building, sign Geight above grade, and the length of mg frontage. (Be sure to also
include these dimensions on the dia •ams provided in Appendix B.)
Sign IettrihIg and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
`-6 Indication of sign type ( 1�� cabinet, panel, etc.).
�dicate on the drawings the proposed matFfials and c ors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc. for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the race color shall match the color of the wall to which the raceway is
attached.
o tde accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
o cation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
`__Fpt-Internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
Tlh location of proposed light fixtures identified on a plan and/or elevation
Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: