HomeMy WebLinkAboutARB202200010 Checklist 2022-05-05 (2)Completeness Check for Signs
Project #/Name: ARB2022-10 Rio Hill Cleaners
Date Received at County: 1/25/22
Date Received in Design Planning:
Date of Checklist Check: 2/2/22 Assigned to/Date:
FEES
INCOMPLETE — FEE NEEDED
3. ARB Review — PF[l the permanent sign(s) be constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑
Yes
This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
❑
Yes
This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
❑
Yes
This is a resubmittal of a sign application.
❑
No
(This sign will not be constructed in an Entrance Corridor)
FEE
TOTAL
(Please add all the amounts checked in sections I — 3):
FREESTANDING SIGNS
Submittal Requirements
❑ ' e plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
$147.68
$135.20
$ 67.60
$ 0.00
❑ Dist ce from the sign to the property lines and/or edge of the VDOT right -of --way.
❑ If the sig ill be located in an easement, a letter of approval from the easement holder will be required.
❑ A to -scale color illus tion of the proposed sign showing
❑ Dimensions of the si , 'ncluding overall height from the ground; cabinet size ength width and depth; base
size, etc. (Be sure to also inc these dimensions on the diagrams provided in th ign Permit Application packet.)
❑ Proposed lettering and/or graphic �s Ln their proposed location.
❑ Entrance Corridor Requirements: If the s is to be constructed i Entrance Corridor, also provide a color
illustration of the front and side elevations of thshowing:
o If internally illuminated, indicate which areas of i are opaque and which are illuminated. Internally
illuminated cabinet signs must have opaque back (Opaque materials don't allow light to pass through.
When lit only from behind, the color of an op a materi of be detected nor can objects be seen through it.)
o Identification of proZtex�
erials and c ors. Include standaz or id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all text, gra ics, base, faces, trim caps, re etc.
o Provide accurate phyles all colors proposed, preferably in the material proposed. (Paint chips that
accurately reflect thec rs are acceptable.)
o Provide a site plan sposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittalmay be required if review by the Architectural Review Board is necessary. (The
applicant will be notrequirement applies.)
WALL SIGNS
,'A drawing, to scale, showing d' sions of the sign (length, height, depth).
udElevation drawing(s) or modified photograph of the entire building, to scale and in color, showing
The sign lochf4n on the building, sign height above grade, and the length of kv4ing frontage. (Be sure to also
include these dimensions on the dia rgrams provided in Appendix B.)
Sign lettcAneaand/or g m their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Indication of sign type (c el le s, cabinet, panel, etc.)
,go," Indicate on the drawings the proposed ma&Xals and colvs. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all m rials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceww4or shall match the color of the wall to which the raceway is
attached.
oo/Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
\a -`location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
*Q/For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
The location of proposed light fixtures identified on a plan and/or elevation
E?*54anufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: