Loading...
HomeMy WebLinkAboutARB202200009 Checklist 2022-05-05Completeness Check for Signs Project #/Name: ARB2022-09 Spero Health Sign Cleaners Fee paid 2/21/22 Date Received at County: 1/24/22 Date Received in Design Planning: Date of Checklist Check: 2/2/22 Assigned to/Date: FEES 3. ARB Review— Will the permanent sign(s) he constructed in an Entrance Corridor? (Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB. $147.68 ❑ Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff. $135.20 ❑ Yes This is a resubmittal of a sign application. $ 67.60 ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $ FREE ANDING SIGNS A. Submitt Requirements ❑ Site plan or late approved plat showing, to scale, the proposed location of the gn(s) with dimensions. ❑ Distance from the s to the property lines and/or edge of the VDOT right- -way. ❑ If the sign will be locate in an easement, a letter of approval from the a meat holder will be required ❑ A to -scale color illustration of roposed sign showing ❑ Dimensions of the sign, includin verall height from ground; cabinet size, length, width and depth; base size, eta (Be sure to also include these ensions on the agrams provided in the Sign Permit Application packet) ❑ Proposed lettering and/or graphics in th prop d location. ❑ Entrance Corridor Requirements: If the sign i be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of a si showing: o If internally illuminated, indicate whic eas of the ' are opaque and which are illuminated. Internally illuminated cabinet signs must have aque backgroan (Opaque materials don't allow light to pass through. When lit only from behind, the co r of an opaque materi arm be detected nor can objects be seen through it.) o Identification of proposed ma ials and colors. Include stan d color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materi , text, graphics, base, faces, trim ca returns, etc. o Provide accurate physic samples of all colors proposed, preferably the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) o Provide a site plan showing proposed landscaping around the sign, includin otanical names and planting sizes. o Additional submittal materials may be required if review by the Architectural R iew Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS `0,-X drawing, to scale, showing dimensions of the sign (length, height, depth). evation drawing(s) or modified photograph of the entire building, to scale and in color, showing ./0 The sigmagLion on the building, sill - tight above grade, and the length of bui g frontage. (Be sure to also include these dimensions on the dia rg ams provided in Appendix B.) NPT&gn leftcring and/or graphics in their proposed location. Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: Vindication of sign type (channel letters, abi �ee17, etc.). %e,' Indicate on the drawings the proposed niftrfa& and colpt< Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all 15aerials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the race color shall match the color of the wall to which the raceway is attached. vt/ Provide accurate physical san s of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) Location of proposed fight fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. „o- For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it. ILLUMINATION REQUIREMENTS The location of proposed light fixtures identified on a plan and/or elevation Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: Sign drawings state no illumination, aluminum face insert (into existing frame); thus the sign has an opaque background.