HomeMy WebLinkAboutARB202200052 Checklist 2022-06-14Completeness Check for Signs
Project #/Name: ARB2022-46: Republic Finance Sign COMPLETE
Date Received at County: 5/16/22
Date Received in Design Planning:
Date of Checklist Check: 5/24/22 Assigned to/Date: MM
FEES
3. ARB Review — Will the permanent sign(s) he constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑ Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
$147.68
9__�Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
$135.20
❑ Yes This is a resubmittal of a sign application.
$ 67.60
❑ No (This sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3):
$
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ If the sign will beelpcated in an easement, a letter of approval from the easement holder will be required.
❑ A to -scale color illustr 'on of the proposed sign showing
❑ Dimensions of the si , including overall height from the ground, cabinet size, length, width and depth, base
size, etc. (Be sure to als 'chide these dimensions on the diagrams provided in the Sign Permit Application packet.)
❑ Proposed lettering and/o raphics in their proposed locatiyc"
❑ Entrance Corridor Requiremen : If the sign is to be c cted man Entrance Corridor, also provide a color
illustration of the front and side ele lions of the si owing:
o If internally illuminated, indicate 'ch of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must hat ue backgrounds. (Opaque materials don't allow light to pass through.
When lit only from behind, or of an ague material cannot be detected nor can objects be seen through it.)
o Identification of pro materials and color . nclude standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for aterials, text, graphics, base, s, trim caps, returns, etc.
o Provide accurate physical samples of all colors proposed, erably in the material proposed. (Paint chips that
accurately reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
A drawing, to scale, showing dimensions of the sign (length, height, depth).
�E*Vgt on drawing(s) or modified photograph of the entire building, to scale and in color, showing
t_'Fhe sign 1 on on the building, sign he t above grade, and the length o L piWiing frontage. (Be sure to also
include these dimensions on the dia rg ams provided in Appendix B.)
LE3�ign lettering and/or graphics in their proposed location.
Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Indication of sign type el le rs, cabinet, panel, etc.).
cate on the drawings the proposed �ials and colorw'Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that thdz4mfw�ay color shall match the color of the wall to which the raceway is
attached.
0rovide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips t accurately reflect the proposed colors are acceptable.)
t ocation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
O �F4r internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
,L;--P11e location of proposed light fixtures identified on a plan and/or elevation
ufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
3M vinyl colors and Pantone equivalents, sign location has very limited visibility