HomeMy WebLinkAboutARB202200052 Checklist 2022-06-14 (2)Completeness Check for Signs
Project #/Name: ARB-2022-52: Storage Sense
Date Received at County: 5/23/22
INCOMPLETE
6/9/22 resubmittal: red id'd = Pantone 202C;
raceway color = "to match color of wall"
Date of Checklist Check: 6/9/22 Assigned to/Date: MM 6/8/22
FEES
3. ARB Review— Will the permanent sign(s) he constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑
Yes
This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
Yes
This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
❑
Yes
This is a resubmittal of a sign application.
❑
No
(This sign will not be constructed in an Entrance Corridor)
FEE TOTAL
(Please add all the amounts checked in sections I — 3):
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ Distance from the sign to the property lines and/or edge of the VDOT right-of-way.
❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required.
❑ A to -scale color iBuIVation of the proposed sign sl
❑ Dimensions of the 1kn, including overall heig
size, etc. (Be sure to aJs ' chide these dimensions
❑ Proposed lettering and/or aphics in their prj
$147.68
$135.20
$ 67.60
$ 0.00
tom the ground; cabinet size, length, width and depth; base
the diagrams provided in the Sign Perm#Apphcadon packet.)
location.
❑ Entrance Corridor Requiremen f the sign i o be constructed in an Entrance Corridor, also provide a color
illustration of the front and side eleva s of a sign showing:
o If internally illuminated, indicate/ou
Seasof the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must hkgrounds. (Opaque materials don't allow light to pass through.
When lit only from behind, the cmaterial cannot be detected nor can objects be seen through it.)
o Identification of proposed materlors. Inc a standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all materials, tos, base, faces, caps, returns, etc.
o Provide accurate physical sarn es of all colors proposed, preNably in the material proposed. (Paint chips that
the accurately reflect propose colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
A drawing, to scale, showing di ns of the sign (length, height, depth).
ElcV411 drawing(s) or modified photograph of the entire building, to scale and in color, showing
The sign to non the building, sign height above grade, and the length of bull ' frontage. (Be sure to also
include these dimensions on the dia •ams provided in Appendix B.)
Sign letie g and/or gr res in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
%a/)ndication of sign type (channel letters, cabinet, panel, etc.).
o Indicate on the drawings the proposed materials colors. Incl a standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all mater , phics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached. Red color not identified. Raceway color not identified.
o Provide accurate physicalamp e I colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect e d colors are acceptable.)
tamcation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
o internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
OIWmaterials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
1UooAe location of proposed light fixtures identified on a plan and/or elevation
Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
Red color not identified. Raceway color not identified. Information provided 6/9/22