HomeMy WebLinkAboutARB202200059 Checklist 2022-06-30 (2)Completeness Check for Signs
Project #/Name: ARB-2022-59 Kenny Ball Sign
Date Received at County:
Date Received in Design Planning:
COMPLETE
Date of Checklist Check: 6/29/22 Assigned to/Date: MM
FEES
❑
Yes
This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
$147.68
Yes
This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
$135.20
❑
Yes
This is a resubmittal of a sign application.
$ 67.60
❑
No
(This sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL
(Please add all the amounts checked in sections I — 3):
$
I FREESTANDING SIGNS I
I A. Submittal Requirements I
Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ stance from the sign to the property lines and/or edge of the VDOT right-of-way. d(//
❑ If thign will be located in an easement, a letter of approval from the easement holder ' be required.
❑ A to -scale color ' ustration of the proposed sign showing
❑ Dimensions of ign, including overall height from the ground; met size, length, width and depth, base
size, eta (Be sure to a 'nclude these dimensions on the diagrams vided in the Sign Permit Application packet.)
❑ Proposed lettering and/or hics in their proposed to on.
❑ Entrance Corridor Requirements: a sign is to be stmcted in an Entrance Corridor, also provide a color
illustration of the front and side elevatio f the showing:
o If internally illuminated, indicate which of the sign are opaque and which are illuminated. Internally
illuminated cabinet signs must have ue b ounds. (Opaque materials don't allow light to pass through.
When lit only from behind, the c r of an opaque aterial cannot be detected nor can objects be seen through it.)
o Identification of proposed erials and colors. Inclu standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc.) for all mat als, text, graphics, base, faces, ' caps, returns, etc.
o Provide accurate ph cal samples of all colors proposed, on
bly in the material proposed. (Paint chips that
accurately reflec a proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, inclu otanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
R A drawing, to scale, showing dimensions of the sign (length, height, depth).
Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing
❑ The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also
include these dimensions on the dia rg ams provided in Appendix B.)
Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
La--ftVc-ation of sign type (channel letters, cabinet, gj iel, et
L,QIndicate on the drawings the proposed materials and colors. Include standard color identification numbers
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
o Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint
chips that accurately reflect the proposed colors are acceptable.)
L mcation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
ointernally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
%Er'Tlre location of proposed light fixtures identified on a plan and/or elevation
C 16 anuf icturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES:
Complete