HomeMy WebLinkAboutARB201300110 Checklist 2013-08-26SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business
ARE 13 -110, Scott's Ivy Exxon
August 29, 2013
REF
CHECKLIST ITEM
NOTES
TYPE
X
9. b
For internally illuminated signs, channel lettering
OK — reface existing panel wall sign
(mounted on a raceway or individual letters) is preferred to
cabinet signs.
X
5. b
When channel letters cannot be adequately accommodated,
N/A
internally illuminated cabinet signs may be considered.
X
6
Reader boards are discouraged.
None proposed
MATERIALS
X
4.c
Materials used in the sign should complement the building
OK — aluminum panel
being served by the sign.
COLOR
X
4.e
Color for raceway- mounted channel letters, the raceway
N/A
shall match the wall color.
Sign colors must be harmonious with each other.
OK
1" border and text: white
Background: red PMS 187
Sign colors must not clash with the site, when viewed in
OK
daylight and at night.
Overly intense color, (such as dayglo or fluorescent
None proposed
colors), are prohibited.
Use of three colors or less (black and white considered as
OK-2
colors)
Additional colors may be approved if they contribute to the
sign balance /unity.
SIZE, SCALE, PROPORTION, AND LOCATION
REF
CHECKLIST ITEM
NOTES
X
4. b
Signs may not exceed the size, height and setback
OK — reface
requirements as outlined in Section 4.15 of the Albemarle
County Zoning Ordinance (unless sign has a variance).
X
Appendix
A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall
OK — reface
A.A
area is a good working proportioning system for placing a
sign.
X
Appendix
Color, form, surface pattern, shape, and disposition of
OK
A.A.4
elements and openings in an architectural design can affect
our perception of scale and can impact the appearance of a
sign on a building.
X
9.d
The wall sign's size must coordinate with the architectural
OK — reface
element's size.
The sign should not over -crowd the architectural element,
OK
the wall, or the sign area.
Buildings and building elements should not be used as
OK
billboards.
X
9.a
Wall signs must integrate with the building's architecture.
OK — reface
The sign placement should not obscure architectural
OK
features or details, (such as cornices, windows, columns,
pilasters and paneling).
X
9.d
An appropriate height for channel letters in a 30" high sign
N/A
band is 18 ".
This allows 6" of unoccupied space above and below the
letters.
4" of clear space above, below, and to the sides of a
channel letter sign is considered a minimum, with larger
clearances required for larger sign bands.
REF
CHECKLIST ITEM
NOTES
Degree of visibility, the distance from the Entrance
Corridor, and the architectural design of the building /area
will determine sign size, placement, and proportions.
X
4.d
Lettering should be in proportion (font size and typeface
style) to the sign and the building.
OK
Use of three typefaces or less.
OK— 1
Additional typefaces may be approved if they contribute to
a balanced /legible /unified sign design.
N/A
X
9. e. iv
The width of the outline must be in proportion to the width
of the letter.
None proposed
An outline width of 1/8" has been found to be an
appropriate sign dimension.
TRADEMARKS, CORPORATE LOGOS AND GRAPHICS
X
4.f
The ARB may require that the color and scale of standard
templates for trademarks, service marks, corporate logos
and graphics be modified.
None proposed
When used, trademarks, service marks, corporate logos
and /or graphics should be incorporated as an integral part
of the overall sign.
X
5.a
External (or no) illumination is preferred for approved
graphics /logos;
X
5.b
internal illumination may be considered for approval on a
case -by -case basis.
LIGHTING
X
9. e. i
External (or no) illumination is preferred for wall signs.
Non - illuminated
X
5.f
Any internal illumination is considered to contribute to
visual clutter and will be limited.
REF
CHECKLIST ITEM
NOTES
X
5.c
Internal illumination design approval will be evaluated on
size, balance, complexity, and distance from the Entrance
Corridor.
X
9. e. iv
The backgrounds of such cabinet signs must be made
N/A
opaque (zero light transmission).
X
5.e
External illumination should be shielded and not create
N/A
glare.
All external light sources shall be white.
None proposed
X
9. ii
Sign lighting (external) should be shielded so that it
N/A
illuminates only face of the sign and does not shine beyond
the edge of the sign.
X
9. iii
Channel letters with translucent faces must have no light
None proposed
spilling outward from the top, bottom, sides or back.
Faces and returns of channel letters shall be opaque when
N/A
back -lit (halo -lit).
X
9. iv
Cabinet signs shall have a non - illuminated background, or
N/A
an opaque (zero light transmission) background.
Cabinet signs shall be constructed such that no light spills
outward from the top, bottom, sides or back.
X
5.g
All illumination shall be non - blinking.
None proposed
X
5.h
An exposed light source that forms the body of a sign,
None proposed
(such as exposed neon signs), shall not be used in the
Entrance Corridors.
ARB ACTIONS
X
If LED lighting is proposed the sign drawing must state
None proposed
The level of illumination provided by the LED lights will
not exceed the illumination produced by a single stroke of
30 milliamp (ma) neon.
X
Red acrylic #2283 has been determined to be an
OK — Red PMS 187 proposed
REF
CHECKLIST ITEM
NOTES
inappropriate color for signs.
Pantone color match for 2283 is 485C.
Red #2793 has been approved as an acceptable substitute.
Pantone color match for 2793 is 187C.
X
ARB
Visual clutter resulting from adjacency, for example at the
N/A
Action
Hardee's locations, is a reasonable basis for not allowing
Memo:
illumination of the graphic.
5/7/12