The URL can be used to link to this page

Home My WebLink AboutARB201400099 Checklist 2014-07-31RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 201400099, Pella Windows Sign 09 -18 -2014 ARB COMMENT NOTES X Reduce the logo size so that the ivory background color shows on all four sides of the logo, framing it. Suggestion: Make the top of the logo equal with the top of the "I" in "WINDOWS" and the bottom of the logo equal with the bottom of the lower row of text. The distance to the edge of the sign and to the "W" should equal the distance to the top of the sign. OK - Done X Add a note to the drawing indicating that illumination is not proposed. OK — Done X Material finish colors on the sign drawing include PMS White C. Please indicate where that color is proposed. OK — PMS White C reference removed from drawing SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business ARB 201400099, Pella Window Sign 08/20/2014 REF CHECKLIST ITEM NOTES TYPE • 9.b For internally illuminated signs, channel lettering (mounted on a raceway or individual letters) is preferred to cabinet signs. N/A — wall panel • 5.b When channel letters cannot be adequately accommodated, internally illuminated cabinet signs may be considered. N/A • 6 Reader boards are discouraged. None proposed MATERIALS • 4.c Materials used in the sign should complement the building being served by the sign. OK — MDO board and vinyl COLOR • 4.e Color for raceway- mounted channel letters, the raceway shall match the wall color. N/A Sign colors must be harmonious with each other. OK — meets approved CSC Sign colors must not clash with the site, when viewed in daylight and at night. OK Overly intense color, (such as dayglo or fluorescent colors), are prohibited. OK Use of three colors or less (black and white considered as colors) Additional colors may be approved if they contribute to the sign balance /unity. OK — 4 colors SIZE, SCALE, PROPORTION, AND LOCATION • 4.b Signs may not exceed the size, height and setback requirements as outlined in Section 4.15 of the Albemarle County Zoning Ordinance (unless sign has a variance). OK — per S. Wright 11.5 sq ft proposed - 72 sq ft max allowed • Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall OK REF CHECKLIST ITEM NOTES A.A area is a good working proportioning system for placing a sign. X Appendix Color, form, surface pattern, shape, and disposition of OK A.A.4 elements and openings in an architectural design can affect our perception of scale and can impact the appearance of a sign on a building. X 9.d The wall sign's size must coordinate with the architectural OK — meets approved CSC element's size. The sign should not over -crowd the architectural element, OK the wall, or the sign area. Buildings and building elements should not be used as OK billboards. X 9.a Wall signs must integrate with the building's architecture. OK The sign placement should not obscure architectural OK features or details, (such as cornices, windows, columns, pilasters and paneling). X 9.d An appropriate height for channel letters in a 30" high sign N/A band is 18 ". This allows 6" of unoccupied space above and below the letters. 4" of clear space above, below, and to the sides of a channel letter sign is considered a minimum, with larger clearances required for larger sign bands. Degree of visibility, the distance from the Entrance Corridor, and the architectural design of the building /area will determine sign size, placement, and proportions. X 4.d Lettering should be in proportion (font size and typeface OK REF CHECKLIST ITEM NOTES style) to the sign and the building. Use of three typefaces or less. OK-2 Additional typefaces may be approved if they contribute to N/A a balanced /legible /unified sign design. • 9. e. iv The width of the outline must be in proportion to the width None proposed of the letter. An outline width of 1/8" has been found to be an appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS AND GRAPHICS • 4.f The ARB may require that the color and scale of standard OK templates for trademarks, service marks, corporate logos and graphics be modified. When used, trademarks, service marks, corporate logos Issue: and /or graphics should be incorporated as an integral part Logo not integrated with sign of the overall sign. Suggestion: reduce height of to match top of smaller text on top row and bottom of text on the bottom row. • 5.a External (or no) illumination is preferred for approved Issue: note on drawing needed indicating no graphics /logos; illumination proposed • 5.b internal illumination may be considered for approval on a N/A case -by -case basis. LIGHTING • 9.e.i External (or no) illumination is preferred for wall signs. Issue: note on drawing needed indicating no illumination proposed • 5.f Any internal illumination is considered to contribute to N/A visual clutter and will be limited. REF CHECKLIST ITEM NOTES X 5.c Internal illumination design approval will be evaluated on N/A size, balance, complexity, and distance from the Entrance Corridor. X 9. e. iv The backgrounds of such cabinet signs must be made None proposed opaque (zero light transmission). X 5.e External illumination should be shielded and not create N/A glare. All external light sources shall be white. N/A X 9. ii Sign lighting (external) should be shielded so that it N/A illuminates only face of the sign and does not shine beyond the edge of the sign. X 9. iii Channel letters with translucent faces must have no light None proposed spilling outward from the top, bottom, sides or back. Faces and returns of channel letters shall be opaque when None proposed back -lit (halo -lit). X 9. iv Cabinet signs shall have a non - illuminated background, or None proposed an opaque (zero light transmission) background. Cabinet signs shall be constructed such that no light spills N/A outward from the top, bottom, sides or back. X 5.g All illumination shall be non - blinking. None proposed X 5.h An exposed light source that forms the body of a sign, None proposed (such as exposed neon signs), shall not be used in the Entrance Corridors. ARB ACTIONS X If LED lighting is proposed the sign drawing must state None proposed The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. X Red acrylic #2283 has been determined to be an No red color proposed REF CHECKLIST ITEM NOTES inappropriate color for signs. Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. X ARB Visual clutter resulting from adjacency, for example at the N/A Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. 5/7/12 COMPREHENSIVE SIGN CRITERIA — VILLAGE GREEN SHOPPING CENTER ARB 2013 -98, Tax Map 61W, Section 3, Parcel 21A ARB2014000099, Pella Window Sign SIGN FEATURE Approved Criteria SIGN TYPE Wall panel or hanging panel Wall Pane Channel letter LETTER FACE Panel: Forest Green OK COLOR Channel Letter: White TRIM CAP COLOR/ Panel: N/A RETURN COLOR Channel letter: Bronze RACEWAY COLOR Panel: N/A Channel letter: To match color of wall to which it is attached PANEL /CABINET Ivory Issue: Ivory background not behind the Pella graphic. White FACE COLORS listed as a color but not indicated where it is used. SIZE LIMITATIONS Hanging panel: Front & Rear: 21" — 24" (t) x 8' (w) Wall panel: Front: 21' — 24" (t) x 8' (w) OK 24" (t) x 7' 6" (w) Rear: as per general sign guidelines without overlapping brick detailing LOCATION(S) Wall Panel: Centered on the wall above the business entrance in both the front and rear elevations - not permitted on the wall under the colonnade. OK — centered horizontally in pediment over windows Hanging Panel: Centered between the colonnade columns in both the front and rear elevations. Channel letter: In the approved sign bands as shown on the photo - rendering below LOGO /GRAPHICS Panel: Forest green border OK DETAILS Channel letter: No limit to graphic colors as long as total number per sign is limited to three and they contribute to a coordinated appearance. ILLUMINATION Panel: No internal illumination; existing wall fixtures may be reused OK DETAILS Channel letter: may be internally illuminated TEXT No limits other than standard guidelines LETTER No limits other than standard guidelines TYPE/FONT MATERIALS No limits other than standard guidelines This form outlines the specific design criteria established for signs at this location. All standard ARB Sign Guidelines also apply. VILLAGE GREEN SIGN BAND 14' -6" An, WIIClgigdiiPbYldP�'P.1PII 01ST DRAFT 0710312013 WSTOMER X VILLAGE GREEN A NOTES FOR CHANGES LOCATION X SALESMAN X RP DESIGNER X CSE A DATE X 07/03/2013 A This dome t is the property of Talley Anchor Sgn C NI d g a same manafactarng p d cG s tl sales rights re gab ng th are expresslyforbdd It is .bmiu,d nd,r a confidential relationship f special pm-pose, and the recipientisy accepting the doomment asamnes custody and agrees that this doou ..Lt II act be copied or r.prcd.c.d in whole or in part, nor its contents revealed in any manner arts anypers- cept for the purpose for which it was tendered, nor any special feature. peculiar to this design be incorporated in omer projects, SIGNS MAY 6E LOCATED IN THESE WALL AREAS, SUDJECTTO ZONING ORDINANCE REGULATIONS AND ENTRANCE CORRIDOR SIGN DESIGN GUIDELINES FOR SIZE, . DESIGN AND PROPORTION. SIGNS MAY 6E LOCATED IN THESE WALL AREAS, SUPJECT TO ZONING ORDINANCE REGULATIONS AND ENTRANCE CORRIDOR SIGN DESIGN GUIDELINES FOR SIZE, . DESIGN AND PROPORTION. (LEFT & RIGHT SIGN SANDS ARE THE SAME 51ZE AND SHAPE AS THE CENTER SIGN f5AND) Tal ley - Anchor SIGN CO M PAN Y 10-04 Ruriton Blvd Chesapeake, 1123324 Ph. 757 -545 -8802• F- 757- 543 -9132 Completeness Check for Signs Project # /Name: _ARB201400099, Pella Windows Sign_ Date Received at County: _07/30/2014 Date Received in Design Planning: _07/31/2014 Date of Checklist Check: _07/31/2014_ Assigned to/Date: _07/31/2014 FEES 3. ARB Review —Will the permanent sign(s) be constructed in an Entrance Corridor? (Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00 Comprehensive Sign Review. See ARB requirements next pages. Fee Paid — should not have been ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages) ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $ FREESTANDING SIGNS N/A A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right -of -way. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: • If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) • Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. • Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) • Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. • Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS ❑ A drawing, to scale, showing dimensions of the sign (length, height, depth). OK ❑ Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ❑ The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B) OK ❑ Sign lettering and /or graphics in their proposed location. OK ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: • Indication of sign type (channel letters, cabinet, panel, etc.). OK • Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. OK • Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) Not Required • Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. Not addressed o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: