Loading...
HomeMy WebLinkAboutARB201400089 Checklist 2014-07-07RESUBMITTAL REVIEW CHECKLIST PROJECT 9/NAME: ARB 201400089, KiraKira Sign 08 -01 -2014 Original ARB Comment 07 -31 -2014 Review 08 -01 -2014 Review X The photo- rendering provided of the sign OK - done OK on the building is too dark and illegible. Provide a photo- rendering, showing the sign on the building, that is legible. X Revise the photo- rendering of the sign on Revise the photo- rendering of the sign on the Revise the photo- rendering of the sign the building as follows: building as follows: on the building as follows: a. To indicate the sign text is "direct- a. To indicate the sign text is "direct- a. To indicate the sign text is mount reverse channel letters ". mount reverse channel letters ". Oh "direct -mount reverse channel b. To indicate the distance from the done letters ". OK - done top of the sign to the top of the sign b. To indicate the distance from the top b. To indicate the distance from the band and from the bottom of the of the sign to the top of the sign band top of the sign to the top of the sign to the bottom of the sign band. and from the bottom of the sign to the sign band and from the bottom Approved sign criteria for bottom of the sign band. Approved of the sign to the bottom of the Stonefield require a minimum of sign criteria for Stonefield require a sign band. Approved sign 10" for both. minimum of 10" for both. OK - done, criteria for Stonefield require a c. To indicate the paint color and 20.25" clearance above and below minimum of 10" for both. OK - manufacturer proposed for the c. To indicate the paint color and done, 20.25" clearance above channel letter faces, trim caps and manufacturer proposed for the channel and below returns. letter faces, trim caps and returns. c. To indicate the paint color and d. To include a note indicating the Issue: drawing does indicate if paint manufacturer proposed for the faces and returns of the reverse color is for letter faces, trim caps and channel letter faces, trim caps channel letters shall be opaque returns and returns. (non - illuminated) at night. d. To include a note indicating the faces Issue: drawing does indicate if e. To include the following note and returns of the reverse channel paint color is for letter faces, regarding the intensity of LED letters shall be opaque (non- trim caps and returns illumination: illuminated) at night. OK - done OK - drawing indicates: "The level of illumination provided e. To include the following note Faces: Warm Gray PMS 11 C by the LED lights will not exceed regarding the intensity of LED Trim caps /returns: Black the illumination produced by a illumination: d. To include a note indicating the single stroke of 30 milliamp (ma) "The level of illumination provided by the faces and returns of the reverse Original ARB Comment 07 -31 -2014 Review 08 -01 -2014 Review neon. " LED lights will not exceed the illumination channel letters shall be opaque produced by a single stroke of 30 milliamp (non- illuminated) at night. OK — (ma) neon. " done Issue: note missing e. To include the following note regarding the intensity of LED illumination: "The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. " Issue: note missing OK — note on drawing RESUBMITTAL REVIEW CHECKLIST PROJECT 9/NAME: ARB 201400089, KiraKira Sign 07 -31 -2014 Original ARB Comment 07 -31 -2014 Review • The photo- rendering provided of the sign on the OK - done building is too dark and illegible. Provide a photo - rendering, showing the sign on the building, that is legible. • Revise the photo- rendering of the sign on the building Revise the photo- rendering of the sign on the building as as follows: follows: a. To indicate the sign text is "direct -mount a. To indicate the sign text is "direct -mount reverse reverse channel letters ". channel letters ". OK - done b. To indicate the distance from the top of the sign b. To indicate the distance from the top of the sign to to the top of the sign band and from the bottom the top of the sign band and from the bottom of the of the sign to the bottom of the sign band. sign to the bottom of the sign band. Approved sign Approved sign criteria for Stonefield require a criteria for Stonefield require a minimum of 10" for minimum of 10" for both. both. OK - done, 20.25" clearance above and below c. To indicate the paint color and manufacturer c. To indicate the paint color and manufacturer proposed for the channel letter faces, trim caps proposed for the channel letter faces, trim caps and and returns. returns. d. To include a note indicating the faces and Issue: drawing does indicate if paint color is for letter returns of the reverse channel letters shall be faces, trim caps and returns opaque (non - illuminated) at night. d. To include a note indicating the faces and returns of e. To include the following note regarding the the reverse channel letters shall be opaque (non- intensity of LED illumination: illuminated) at night. OK - done "The level of illumination provided by the LED e. To include the following note regarding the intensity lights will not exceed the illumination produced of LED illumination: by a single stroke of 30 milliamp (ma) neon. " "The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. " Issue: note missing SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business ARB201400089, KiraKira Sign 07 -14 -2014 REF CHECKLIST ITEM NOTES TYPE • 9.b For internally illuminated signs, channel lettering OK -meets approved CSC (mounted on a raceway or individual letters) is preferred to cabinet signs. • 5.b When channel letters cannot be adequately accommodated, N/A internally illuminated cabinet signs may be considered. • 6 Reader boards are discouraged. None proposed MATERIALS • 4.c Materials used in the sign should complement the building OK being served by the sign. COLOR • 4.e Color for raceway- mounted channel letters, the raceway OK — direct -mount shall match the wall color. Sign colors must be harmonious with each other. Issue — sign color not indicated — must meet approved CSC Sign colors must not clash with the site, when viewed in OK daylight and at night. Overly intense color, (such as dayglo or fluorescent OK colors), are prohibited. Use of three colors or less (black and white considered as OK — appears to be 1 color colors) Additional colors may be approved if they contribute to the sign balance /unity. SIZE, SCALE, PROPORTION, AND LOCATION • 4.b Signs may not exceed the size, height and setback OK —per S. Wright 07 -08 -2014 requirements as outlined in Section 4.15 of the Albemarle 1 17.25 sq ft proposed - 25.8 sq ft max allowed REF CHECKLIST ITEM NOTES County Zoning Ordinance (unless sign has a variance). New tenant - needs to apply for a Zoning Clearance begore the sign permit can be issued X Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall Issue — see CSC review A.A area is a good working proportioning system for placing a sign. X Appendix Color, form, surface pattern, shape, and disposition of Issue — see CSC review A.A.4 elements and openings in an architectural design can affect our perception of scale and can impact the appearance of a sign on a building. X 9.d The wall sign's size must coordinate with the architectural Issue — see CSC review element's size. The sign should not over -crowd the architectural element, Issue — see CSC review the wall, or the sign area. Buildings and building elements should not be used as OK billboards. X 9.a Wall signs must integrate with the building's architecture. OK The sign placement should not obscure architectural OK features or details, (such as cornices, windows, columns, pilasters and paneling). X 9.d An appropriate height for channel letters in a 30" high sign N/A — CSC band is 18 ". This allows 6" of unoccupied space above and below the letters. 4" of clear space above, below, and to the sides of a channel letter sign is considered a minimum, with larger clearances required for larger sign bands. REF CHECKLIST ITEM NOTES Degree of visibility, the distance from the Entrance Corridor, and the architectural design of the building /area will determine sign size, placement, and proportions. X 4.d Lettering should be in proportion (font size and typeface style) to the sign and the building. OK Use of three typefaces or less. OK— 1 Additional typefaces may be approved if they contribute to a balanced /legible /unified sign design. N/A X 9. e. iv The width of the outline must be in proportion to the width of the letter. None proposed An outline width of 1/8" has been found to be an appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS AND GRAPHICS X 4.f The ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and graphics be modified. None proposed When used, trademarks, service marks, corporate logos and /or graphics should be incorporated as an integral part of the overall sign. X 5.a External (or no) illumination is preferred for approved graphics /logos; N/A X 5.b internal illumination may be considered for approval on a case -by -case basis. N/A LIGHTING X 9.e.i External (or no) illumination is preferred for wall signs. OK — halo - lighting meets CSC X 5f Any internal illumination is considered to contribute to visual clutter and will be limited. OK REF CHECKLIST ITEM NOTES X 5.c Internal illumination design approval will be evaluated on OK size, balance, complexity, and distance from the Entrance Corridor. X 9. e. iv The backgrounds of such cabinet signs must be made None proposed opaque (zero light transmission). X 5.e External illumination should be shielded and not create N/A glare. All external light sources shall be white. N/A X 9. ii Sign lighting (external) should be shielded so that it N/A illuminates only face of the sign and does not shine beyond the edge of the sign. X 9. iii Channel letters with translucent faces must have no light N/A spilling outward from the top, bottom, sides or back. Faces and returns of channel letters shall be opaque when Issue — not noted on sign drawing back -lit (halo -lit). X 9. iv Cabinet signs shall have a non - illuminated background, or None proposed an opaque (zero light transmission) background. Cabinet signs shall be constructed such that no light spills outward from the top, bottom, sides or back. X 5.g All illumination shall be non - blinking. None proposed X 5.h An exposed light source that forms the body of a sign, None proposed (such as exposed neon signs), shall not be used in the Entrance Corridors. ARB ACTIONS X If LED lighting is proposed the sign drawing must state Issue — required note missing from drawing The level of illumination provided by the LED lights will not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. X Red acrylic #2283 has been determined to be an No red color proposed REF CHECKLIST ITEM NOTES inappropriate color for signs. Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. X ARB Visual clutter resulting from adjacency, for example at the N/A Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. 5/7/12 STONEFIELD TOWN CENTER SIGN CRITERIA —This table outlines the approved design criteria for the north elevations of B2 and 133; the south elevations of A3, A4, C1 -2 and C1 -3; the east elevations of A3 (adjacent to the EC) and C1 -2; and the west elevations of A4 and C1 -3 in the Stonefield Town Center. SIGN TYPE Facade Signs ( *numbers correspond to Projecting Signs Canopy Signs Awning Signs Blade Signs illumination details) Panel with push- through 1. Channel letters letters /graphics 2. Reverse channel letters 3. Panel with push- through letters /graphics SIGN LOCATION As noted on elevations. Minimum 8" As noted on elevations On any canopy On valance of type 1 awnings only In close proximity to storefront entry clearance to architectural features; 10" doors; aligned with architectural clearance to top /bottom of mounting features of storefront and fagade. area. Panel signs only allowed on May be outside area designated on Building Al, AS and 131 facades that do elevation drawings. not have frontage on the Entrance Corridors. SIZE LIMITATIONS Letter height max 30 ". Signs must be in Signs must be in proportion with other Letter height max 10 ". Logo and Located on valance only 3' x 1'6" proportion with other signs and the signs and the overall building. graphic signs max 10 ". Signs must be overall building. in proportion with canopy face, other signs, and the overall building. PROJECTION LIMITATIONS N/A 36" Max projection from face of wall N/A N/A 9' minimum clearance from grade. 9' -0" min clearance from grade level LETTER COLOR Black, White, Warm Grays (Pantone Black, White, Warm Grays (Pantone Black, White, Warm Gray. Unlimited Black, White, Warm Gray Warm Gray 1 -11) Warm Gray 1 -11) Match /harmonize with canopy color /material TRIM CAP /RETURN COLOR Trim cap color to match return color. N/A N/A N/A N/A Return colors are Black, White, Warm Grays. BACKGROUND /PANEL /BODY Black, White, Warm Grays (Pantone Black, White, Warm Grays (Pantone N/A Awning colors: Sunbrella Black 08, Unlimited COLOR Warm Gray 1 -11) Warm Gray 1 -11) Natural 04, Charcoal Gray 44, Navy Blue 26, Alpine Green 55, Panorama Taupe 48 MOUNTING DETAILS Mounted to exterior wall Mounted to exterior wall Mounted to canopy face. Sign Printed on awning valance - elements cannot extend above or below canopy edges. GRAPHICS Colors and illumination are subject to Colors and illumination are subject to Unlimited Unlimited Colors and illumination are subject to review review review. ILLUMINATION DETAILS *Numbers correspond to sign type Halo- Illuminated push- through Non - illuminated Non - illuminated Non - illuminated 1. External Illumination 2. Halo Illumination 3. Halo- Illuminated push- through LETTER TYPE /FONT Unlimited Unlimited Unlimited Unlimited - MATERIALS Unlimited Unlimited Unlimited Fabric - NOTES: 1. Logo /graphics colors are subject to EC review. 2. Illumination of logos /graphics is subject to EC review. 3. Sign size is subject to EC review for appropriate scale and proportion. 4. Sign colors are subject to review for compatibility. STONEFIELD TOWN CENTER SIGN CRITERIA —This table outlines the approved design criteria for the north elevations of B2 and 133; the south elevations of A3, A4, C1 -2 and C1 -3; the east elevations of A3 (adjacent to the EC) and C1 -2; and the west elevations of A4 and C1 -3 in the Stonefield Town Center. ARB 201400089, Kira Kira Sign SIGN TYPE Facade Signs ( *numbers correspond to Projecting Signs Canopy Signs Awning Signs Blade Signs illumination details) Panel with push- through 1. Channel letters letters /graphics 2. Reverse channel letters OK 3. Panel with push- through letters /graphics SIGN LOCATION As noted on elevations. OK Minimum 8" As noted on elevations On any canopy On valance of type 1 awnings only In close proximity to storefront entry clearance to architectural features; 10" doors; aligned with architectural clearance to top /bottom of mounting features of storefront and fagade. area. Needs to be dimensioned on May be outside area designated on rendering Panel signs only allowed on elevation drawings. Building Al, AS and 131 facades that do not have frontage on the Entrance Corridors. N/A SIZE LIMITATIONS Letter height max 30 ". Signs must be in Signs must be in proportion with other Letter height max 10 ". Logo and Located on valance only 3' x 1'6" proportion with other signs and the signs and the overall building. graphic signs max 10 ". Signs must be overall building. OK in proportion with canopy face, other signs, and the overall building. PROJECTION LIMITATIONS N/A 36" Max projection from face of wall N/A N/A 9' minimum clearance from grade. 9' -0" min clearance from grade level LETTER COLOR Black, White, Warm Grays (Pantone Black, White, Warm Grays (Pantone Black, White, Warm Gray. Unlimited Black, White, Warm Gray Warm Gray 1 -11) Color not noted on Warm Gray 1 -11) Match /harmonize with canopy drawing color /material TRIM CAP /RETURN COLOR Trim cap color to match return color. N/A N/A N/A N/A Return colors are Black, White, Warm Grays. Not noted on drawing BACKGROUND /PANEL /BODY Black, White, Warm Grays (Pantone Black, White, Warm Grays (Pantone N/A Awning colors: Sunbrella Black 08, Unlimited COLOR Warm Gray 1 -11) N/A Warm Gray 1 -11) Natural 04, Charcoal Gray 44, Navy Blue 26, Alpine Green 55, Panorama Taupe 48 MOUNTING DETAILS Mounted to exterior wall Mounted to exterior wall Mounted to canopy face. Sign Printed on awning valance - elements cannot extend above or below canopy edges. GRAPHICS Colors and illumination are subject to Colors and illumination are subject to Unlimited Unlimited Colors and illumination are subject to review None proposed review review. ILLUMINATION DETAILS *Numbers correspond to sign type Halo- Illuminated push- through Non - illuminated Non - illuminated Non - illuminated 1. External Illumination 2. Halo Illumination Halo illumination noted but opaque faces /returns not noted on drawing 3. Halo- Illuminated push- through LETTER TYPE /FONT Unlimited Unlimited Unlimited Unlimited - MATERIALS Unlimited Unlimited Unlimited Fabric - Completeness Check for Signs Project # /Name: ARB201400089, KiraKira Sign Date Received at County: _07/03/2014 Date Received in Design Planning: _07/07/2014 Date of Checklist Check: _07/11/2014 Assigned to /Date: _07/07/2014 FEES 3. ARB Review —Will the permanent sign(s) be constructed in an Entrance Corridor? (Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00 Comprehensive Sign Review. See ARB requirements next pages.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages) OK ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $ FREESTANDING SIGNS N/A A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right -of -way. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: • If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) • Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. • Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) • Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. • Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS ❑ A drawing, to scale, showing dimensions of the sign (length, height, depth). ❑ Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ❑ The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B)OK ❑ Sign lettering and /or graphics in their proposed location. OK ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: • Indication of sign type (channel letters, cabinet, panel, etc.). OK • Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. Missing • Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) Missing • Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. OK o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) Opaque note missing ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation OK ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. OK NOTES: