Loading...
HomeMy WebLinkAboutARB201300178 Checklist 2013-12-09RESUBMITTAL REVIEW CHECKLIST PROJECT #/NAME: ARB 13 -178, Stereo Types Sign 12 -02 -2014 ARB COMMENT NOTES • Sign Drawing_ OK - entire sheet provided Only part of the sign drawing was included in this application. It appears the drawing may be 8.5" x 14" in size; however, only 8.5" x 11" was provided. Please provide the entire drawing. • Channel Letter Colors: OK - bronze trim caps /returns indicated on the sign drawing Approved sign criteria for this building (attached) call for white or bronze trim caps and bronze returns for the white face channel letters. Black trim caps and returns are currently proposed. Please revise the drawing to meet the approved criteria. • Photo - Rendering/ xisting Adjacent Sign: Issues - see ; < The existing "Kid to Kid" wall sign located just to the south of the proposed sign is not shown on the photo - rendering provided. Approved sign criteria for this building (attached) require that the sign be spaced and aligned with existing signs to achieve a balanced appearance without overcrowding. Please revise the photo- rendering to: • Indicate the width of the Stereo Types glass storefront OK • Show the adjacent "Kid to Kid" sign to the south Not addressed And to include the following note: "The proposed sign shall be centered horizontally above the business storefront below and centered vertically with the adjacent "Kid to Kid" sign to the south." Not addressed SIGN REVIEW CHECKLIST with REFERENCES — Wall Sign, Single Business ARB 201300178, Stereo Types Sign 12/13/2013 REF CHECKLIST ITEM NOTES TYPE • 9.b For internally illuminated signs, channel lettering OK — channel letter (mounted on a raceway or individual letters) is preferred to cabinet signs. • 5.b When channel letters cannot be adequately accommodated, N/A internally illuminated cabinet signs may be considered. • 6 Reader boards are discouraged. None proposed MATERIALS • 4.c Materials used in the sign should complement the building OK being served by the sign. COLOR • 4.e Color for raceway- mounted channel letters, the raceway OK — note on drawing shall match the wall color. Sign colors must be harmonious with each other. Issue; Proposed black trim cap & returns — does not meet approved comp. criteria Sign colors must not clash with the site, when viewed in OK daylight and at night. Overly intense color, (such as dayglo or fluorescent None proposed colors), are prohibited. Use of three colors or less (black and white considered as OK— I colors) Additional colors may be approved if they contribute to the sign balance /unity. SIZE, SCALE, PROPORTION, AND LOCATION • 4.b Signs may not exceed the size, height and setback OK —per S. Wright requirements as outlined in Section 4.15 of the Albemarle 132.6 sq ft proposed - 39 sq ft max allowed REF CHECKLIST ITEM NOTES County Zoning Ordinance (unless sign has a variance). CLE2013 -157 X Appendix A ratio of 1/3 text to 2/3 wall area or 1/4 text to 3/4 wall Issue: only part of the sign drawing provided A.A area is a good working proportioning system for placing a sign. X Appendix Color, form, surface pattern, shape, and disposition of Issue: only part of the sign drawing provided A.A.4 elements and openings in an architectural design can affect our perception of scale and can impact the appearance of a sign on a building. X 9.d The wall sign's size must coordinate with the architectural Issue: only part of the sign drawing provided element's size. The sign should not over -crowd the architectural element, Issue: only part of the sign drawing provided the wall, or the sign area. Buildings and building elements should not be used as OK billboards. X 9.a Wall signs must integrate with the building's architecture. Issue: only part of the sign drawing provided The sign placement should not obscure architectural OK features or details, (such as cornices, windows, columns, pilasters and paneling). X 9.d An appropriate height for channel letters in a 30" high sign N/A band is 18 ". This allows 6" of unoccupied space above and below the letters. 4" of clear space above, below, and to the sides of a channel letter sign is considered a minimum, with larger clearances required for larger sign bands. Degree of visibility, the distance from the Entrance Corridor, and the architectural design of the building /area REF CHECKLIST ITEM NOTES will determine sign size, placement, and proportions. • 4.d Lettering should be in proportion (font size and typeface style) to the sign and the building. . Only part of the sign drawing provided • Add the width of the storefront to the drawing so proportion can be evaluated Use of three typefaces or less. OK- 1 Additional typefaces may be approved if they contribute to a balanced /legible /unified sign design. N/A • 9. e. iv The width of the outline must be in proportion to the width of the letter. None proposed An outline width of 1/8" has been found to be an appropriate sign dimension. TRADEMARKS, CORPORATE LOGOS AND GRAPHICS • 4.f The ARB may require that the color and scale of standard templates for trademarks, service marks, corporate logos and graphics be modified. None proposed When used, trademarks, service marks, corporate logos and /or graphics should be incorporated as an integral part of the overall sign. N/A • 5.a External (or no) illumination is preferred for approved graphics /logos; N/A • 5.b internal illumination may be considered for approval on a case -by -case basis. N/A LIGHTING • 9.e.i External (or no) illumination is preferred for wall signs. OK — internally lit channel letter • 5.f Any internal illumination is considered to contribute to visual clutter and will be limited. OK REF CHECKLIST ITEM NOTES X 5.c Internal illumination design approval will be evaluated on OK size, balance, complexity, and distance from the Entrance Corridor. X 9. e. iv The backgrounds of such cabinet signs must be made None proposed opaque (zero light transmission). X 5.e External illumination should be shielded and not create None proposed glare. All external light sources shall be white. N/A X 9. ii Sign lighting (external) should be shielded so that it N/A illuminates only face of the sign and does not shine beyond the edge of the sign. X 9. iii Channel letters with translucent faces must have no light OK spilling outward from the top, bottom, sides or back. Faces and returns of channel letters shall be opaque when None proposed back -lit (halo -lit). X 9. iv Cabinet signs shall have a non - illuminated background, or None proposed an opaque (zero light transmission) background. Cabinet signs shall be constructed such that no light spills OK outward from the top, bottom, sides or back. X 5.g All illumination shall be non - blinking. None proposed X 5.h An exposed light source that forms the body of a sign, None proposed (such as exposed neon signs), shall not be used in the Entrance Corridors. ARB ACTIONS X If LED lighting is proposed the sign drawing must state LED note on drawing but The level of illumination provided by the LED lights will Issue: only part of the sign drawing provided not exceed the illumination produced by a single stroke of 30 milliamp (ma) neon. X Red acrylic #2283 has been determined to be an None proposed REF CHECKLIST ITEM NOTES inappropriate color for signs. Pantone color match for 2283 is 485C. Red #2793 has been approved as an acceptable substitute. Pantone color match for 2793 is 187C. X ARB Visual clutter resulting from adjacency, for example at the N/A Action Hardee's locations, is a reasonable basis for not allowing Memo: illumination of the graphic. 5/7/12 RON MARTIN WAREHOUSE ADDITION SIGN APPROVAL ARB201300178, Stereo Types Sign Building 1 Building 1 Building 2 Building 3 Building 3 Elevation West South West West South Location & Size 1. Canopy: Centered 1. Located in the upper 1. Above the first story 1. Between the first and Blank wall area: In the second story windows: vertically in the sign band of corner at the west end of windows: Centered blank wall area to the Centered horizontally the canopy, with 3" of clear the elevation, no larger vertically between the first right of the entrance bay, space above and below the than 8' -4" (W) x 3' -7" (H), and second story windows, over the first story centered left -to- right. If *Criteria sign. If a single sign, the allowing 6" of clear space with a minimum of 10" of windows, vertically contained within the indicate possible sign must be centered left- below the cornice. clear space above and below between the 1St and 2 °d scored band, a minimum sign locations. to- right. If multiple signs, the sign. If a single sign, story windows; with a of 6" of clear space Sign proposal the signs must be spaced to 2. South side of canopy centered left -to -right above minimum 6" of clear above and below the sign above door: Centered must still meet all achieve a balanced the middle window bays. If space above and below is required. If sign is Sign Guidelines appearance. vertically and horizontally; multiple signs, the signs the sign. If multiple taller than the scored for scale and with a minimum of 6" of must be spaced to achieve a signs, signs shall align band, it must align with proportion. 2. Southern corner: Located clear space above and balanced appearance across the fagade, spaced signs on the west in the upper corner at the below. without over - crowding the to achieve a balanced elevation. south end of the elevation, elevation. appearance without over - no larger than 8' -4" (W) x crowding the elevation. Cabinetibox signs for 3' -7" (H), allowing 6" of Issue: these locations may not clear space below the . Adjacent Kid to Kid exceed 18" in height. cornice. sign to the south not on photo - rendering • Note needed that sign will be centered vertically with the adjacent Kid to Kid sign to the south and horizontally with the storefront • Add the width of the storefront to the drawing 2. Entrance bay: Centered horizontally and vertically in the band above the entrance, with 10" of clear space above and below the sign. Cabinet/box signs for these locations may not exceed 18" in height. Type Channel Letters Channel letters Channel letters Channel Letters; Tagline Channel Letters; Tagline cabinet with push cabinet with push through coy through copy Illumination Internal neon; LED Internal neon; LED Internal neon; LED Letters: Internal neon or Letters: Internal neon or LED; Cabinet: Internal LED; Cabinet: Internal fluorescent or LED with fluorescent or LED with opaque background opaque background Channel Letter Black daytime /white nighttime faces with black trim caps and returns; or White acrylic faces with white or bronze trim caps and bronze returns; or Colors Red PMS 200C faces with bronze trim caps and returns. Individual signs may use only one face color. Issue: Black trim caps /returns with white faces Mounting/ Raceway color to match Raceway color to match Raceway color to match Letters: Raceway color Letters: Raceway color Raceway wall wall wall to match wall; Cabinet: to match wall; Cabinet: Direct mounted Direct mounted Cabinet Colors n/a n/a n/a White acrylic letters on White acrylic letters on bronze or black bronze or black background background This form outlines the specific design criteria and the signs originally approved at this location. Future sign designs (new and /or replacement) must follow these criteria. They may not exceed the number of colors or fonts used, and must maintain coordination of signs throughout the property. All standard ARB Sign Guidelines also apply. Original Comp Sign Review Criteria — ARB2005 -13; Changes to the Criteria — ARB 2009 -84, Keller Williams Sign; Additional Changes to the Criteria, June 21, 2010, based on ARB2010 -56, Play It Again Wall Sign application "Building 1" refers to the southernmost part of the building. "Building 2" is the middle, connector building. "Building 3" is the northernmost part of the building. Issue: Sign drawing is cut off — only part of the drawing provided Completeness Check for Signs Project #/Name: _ARB201300178, Stereo Types Sign Date Received at County: _12/04/2013 Date Received in Design Planning: _12/09/2013 Date of Checklist Check: _12/10/2013 Assigned to/Date: _12/09/2013 FEES 3. ARB Review —Will the permanent sign(s) be constructed in an Entrance Corridor? (Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does not meet the conditions of a $120.00 Comprehensive Sign Review. See ARB requirements next pages.) ❑ Yes (This sign will be constructed in an Entrance Corridor and it does meet the conditions of a Waive Fee Comprehensive Sign Review. See ARB requirements next pages) OK ❑ No (This sign will not be constructed in an Entrance Corridor) $ 0.00 FEE TOTAL (Please add all the amounts checked in sections I — 3): $ FREESTANDING SIGNS None Proposed A. Submittal Requirements ❑ Site plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. ❑ Distance from the sign to the property lines and/or edge of the VDOT right -of -way. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ A to -scale color illustration of the proposed sign showing ❑ Dimensions of the sign, including overall height from the ground; cabinet size, length, width and depth; base size, etc. (Be sure to also include these dimensions on the diagrams provided in the Sign Permit Application packet.) ❑ Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illustration of the front and side elevations of the sign showing: • If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) • Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. • Provide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) • Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. • Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) WALL SIGNS ❑ A drawing, to scale, showing dimensions of the sign (length, height, depth). Only part of the drawing printed ❑ Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing ❑ The sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also include these dimensions on the diagrams provided in Appendix B) Only part of the drawing printed ❑ Sign lettering and /or graphics in their proposed location. Only part of the drawing printed ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: • Indication of sign type (channel letters, cabinet, panel, etc.). OK • Indicate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. OK • Provide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) N/A • Location of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. o For internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) Only part of the drawing printed ILLUMINATION REQUIREMENTS ❑ The location of proposed light fixtures identified on a plan and/or elevation Only part of the drawing printed ❑ Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. Only part of the drawing printed NOTES: