HomeMy WebLinkAboutARB202300003 Checklist 2023-01-13 (2)Completeness Check for Signs
Project #/Name: ARB 2023-03 Sticks Sign COMPLETE
Date Received at County: 1/3/23
Date Received in Design Planning: -
Date of Checklist Check: 1/11/23 Assigned to/Date: MM
FEES
Fee paid
3.
ARB Review— Will the permanent sign(s) he constructed in an Entrance Corridor?
(Seethe Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.)
❑
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB.
$147.68
❑
Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff.
$135.20
❑
Yes This is a resubmittal of a sign application.
$ 67.60
❑
No (This sign will not be constructed in an Entrance Corridor)
$ 0.00
FEE TOTAL (Please add all the amounts checked in sections I — 3): $
FREESTANDING SIGNS
A. Submittal Requirements
❑ Site plank latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions.
❑ DistanceNn the sign to the property lines and/or edge of the VDOT right-of-wati
El If the sign wriNe located in an easement, a letter of approval from the easem older will be required.
❑ A to -scale color illu Na
of the proposed sign showing
❑ Dimensions of the ,including overall height fro ground, cabinet size, length, width and depth, base
size, etc. (Be sure to als 'chide these dimensions a diagrams provided in the Sign Permit Application packet)
❑ Proposed lettering and/or phics in the' oposed location.
❑ Entrance Corridor Requirement . f gn is to be constructed man Entrance Corridor, also provide a color
illustration of the front and side ele �as
the sign showing:
o If internally illuminated, i ate wof the sign are opaque and which are illuminated. Internally
illuminated cabinet si ust havckgrounds. (Opaque materials don't allow light to pass through.
When lit only fro ind, the color of an op material cannot be detected nor can objects be seen through it.)
o Identification o oposed materials and colors. Inc standard color id numbers (Pantone, Benjamin Moore,
Acrylic, etc. r all materials, text, graphics, base, faces, ' caps, returns, etc.
o Provide a ate physical samples of all colors proposed, pre ly in the material proposed. (Paint chips that
accurat reflect the proposed colors are acceptable.)
o Provide a site plan showing proposed landscaping around the sign, inc uding botanical names and planting sizes.
o Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The
applicant will be notified if this requirement applies.)
WALL SIGNS
vQoMeawring, to scale, showing dimensions of the sign (length, height, depth).
U*Arvation drawing(s) or modified photograph of the entire building, to scale and in color, showing
%i lie sign location on the building, sign height above grade, and the length of building frontage. (Be sure to also
include these dimensions on the diagramsprovided in Appendix B.)
Sign lettering and/or graphics in their proposed location.
❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color
illustration of the front and side elevations of the sign showing:
Indication of sign type (channel letters, cabinet, panel, etc.).
dicate on the drawings the proposed materials and colors. Include standard color identification numbers
�n
(Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter
signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is
attached.
rovide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint 000
chips that accurately reflect the proposed colors are acceptable.)
%�ocation of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style,
, shieldin color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17.
0007
or internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque
materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be
detected nor can objects be seen through it.
ILLUMINATION REQUIREMENTS
TheJocation of proposed light fixtures identified on a plan and/or elevation
�IvI/anufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must
meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance.
NOTES: