Loading...
HomeMy WebLinkAboutARB202300002 Checklist 2023-01-18 (2)Completeness Check for Signs Project #/Name: ARB 2023-02 Praha Bakery signs Date Received at County: 1/3/23 Date Received in Design Planning: - Date of Checklist Check: 1/11/23 Assigned to/Date: MM FEES Fees Paid 3. ARB Review — Will the permanent sign(s) be constructed in an Entrance Corridor? (See the Entrance Corridor map in the Sign Permit Application packet for a list of Entrance Corridors.) ❑ Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by the ARB. ❑ Yes This sign will be constructed in an Entrance Corridor and it will be reviewed by staff. ❑ Yes This is a resubmittal of a sign application. ❑ No (This sign will not be constructed in an Entrance Corridor) FEE TOTAL (Please add all the amounts checked in sections I — 3): $147.68 $135.20 $ 67.60 $ 0.00 I FREESTANDING SIGNS I I A. Submittal Requirements I plan or latest approved plat showing, to scale, the proposed location of the sign(s) with dimensions. Distance from the sign to the property lines and/or edge of the VDOT right-of-way. ❑ If the sign will be located in an easement, a letter of approval from the easement holder will be required. ❑ o-scale cwlo tstration of the proposed sign showing Dimensions of the sign, including er hei t m the ground; cabinet size, length, width and depth, base size, etc. (Be sure to also include these rr�s on the diagrams provided in the Sign Permit Application packet.) Proposed lettering and/or graphics in their proposed location. ❑ Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor, also provide a color illus ration of the front and side elevations of the sign showing: If internally illuminated, indicate which areas of the sign are opaque and which are illuminated. Internally illuminated cabinet signs must have opaque backgrounds. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it.) Identification of proposed materials and colors. Include standard color id numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, base, faces, trim caps, returns, etc. W000"ide accurate physical samples of all colors proposed, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) Provide a site plan showing proposed landscaping around the sign, including botanical names and planting sizes. %#0 Additional submittal materials may be required if review by the Architectural Review Board is necessary. (The applicant will be notified if this requirement applies.) I �j WALL SIGNS A drawing, to scale, showing dimensions of the sign (length, height, depth). Elevation drawing(s) or modified photograph of the entire building, to scale and in color, showing 0 V The sigvcation on the building, sign height above grade, and the length of build' frontage. (Be sure to also include these dimensions on the dia rg ams provided in Appendix B.) Sign lettering and/or graphics in their proposed location. Entrance Corridor Requirements: If the sign is to be constructed in an Entrance Corridor also provide a color illustration of the front and side elevations of the sign showing: dlndication of sign type (channel letters, cabinet, panel, etc.). *0001 rcate on the drawings the proposed materials and colors. Include standard color identification numbers (Pantone, Benjamin Moore, Acrylic, etc.) for all materials, text, graphics, faces, trim caps, etc. For channel letter signs, indicate on the drawing that the raceway color shall match the color of the wall to which the raceway is attached. q600slQvide accurate physical samples of all colors proposed in the sign, preferably in the material proposed. (Paint chips that accurately reflect the proposed colors are acceptable.) q,00lcortion of proposed light fixtures and manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17. v4 1 internally illuminated signs, indicate which areas of the sign are opaque and which are illuminated. (Opaque materials don't allow light to pass through. When lit only from behind, the color of an opaque material cannot be detected nor can objects be seen through it. ILLUMINATION REQUIREMENTS PV location of proposed light fixtures identified on a plan and/or elevation Manufacturer cut sheets describing illumination type, intensity, style, shielding, color, and height. All lighting must meet ordinance requirements as outlined in Section 4.17 of the Zoning Ordinance. NOTES: Overall height of freestanding sign not provided, but posts and frame are existing and sign is less than 12' tall. This is a refacing — not a new sign. The existing freestanding sign was installed some time between 2005 and 2009. There is no ARB application in the system for the original freestanding sign.