HomeMy WebLinkAboutARB202300009 Plan - Approved 2023-02-09NEW ATM Canopy
WFR-ATM-C-NI-GTTW
13'-0ii
1�
■Wells Fargo Red, Satin Finish
Option 1:
Matthews Paint MP65837
Option Sa:
(Field Paint Application Only)
Roll-on Additive: #47-444SP
Opton lb:
Ultra Low VOC LVS65837-3
Option 2:
AkzoNobel SIGN20361
Option 2a: (Field Paint Application Only)
Roll-on Additive: #390909
Option 3:
Sherwin Williams G4-5778847 or LV-1225874 (single stage)
Option 3a:
(Field Paint Application Only)
Acrylic Roll-on Paint: SHER-CRYL HPA B66T354
■P30
Kaffee 6104
Option 1
Matthews Paint MP 37282
Option 2
Sherwin Williams G4-1402632 or LV-5493300 (single stage)
Scale:3/8"=1'
Material
M2
Aluminum
M6
Alpolic ACM #WRY Wells Fargo Red
4mm PE core
Mil
Solution Dyed Acrylic Marine Cloth
Sunbrella Jockey Red, Spec No. 4603-0000 (Primary Option)
M43
Solution Dyed Acrylic Marine Cloth
Sunbrella Cocoa, Spec No. 4676-0000 (Secondary Option Only)
Light Source
L18
CREE-KR6 (KR6-13L-40K-120V with KR6T-SSGC)
AFTER
AWNING: Sunbrella solution dyed acrylic marine cloth, Sunbrella Jockey Red, with CREE light fixture.
1a. Sign contractor responsible for coordination of power requirements for under awning light fixture, as required.
lb. Not used.
1c. Alpolic ACM, custom color Wells Fargo Red, to be used on underside of awning. Single sheet to be used when possible and seams to be
minimized if required. Rout and return ACM to attach to adjacent material as shown.
le. Fasteners to be countersunk with any visible fasteners that are required painted to match the adjacent surface.
If. Awning width varies based on the retail store front.
1g. Canvas awning to be attached to tubular aluminum frame structure. Awning rests directly on top of the retail storefront.
1h. Cocoa Sunbrella awning & Kaffee paint for underside to be used as secondary option only. Wells Fargo approval required.
MOUNTING: Sign contractor responsible for field survey of existing
conditions prior to shop drawing submittal to include appropriate attachment method.
All mechanical fasteners to be concealed if possible. Visible fasteners to be painted out to match sign panel.
BEFORE
TL3-46675
Date: 09-09-2022
Sole: as noted
Sales: T. Bailey
Designer: M. Holman
Rev. #:
Date:
Revision Note:
Required:
Final dimensions subject to
site survey and/or technical
specifications.
❑f 120V 347V
Other
Signature
MM/DD/VYVy
It is the Customer's responsibility to
ensure that the structure of the
building is designed and constructed
to accept the installation of the signs
being ordered. please ask PSG
to provide further details if required.
All rights reserved. The artwork
depicted herein are copyright and
are the exclusive property of
Pattison Sign Group and as such
cannot be reproduced in whale or
in part without written permission
by Pattison Sign Group.
WF BE 142560
Wells Fargo
1625 Seminole Trail
arlottesville, VA 22901
Pattison Sign Group
Powering Your Brand
520 W Summit Hill, Suite 702, Knoxville TN, 37902
(Toll Free) 1.866.635.1110 (Fax) 1.888.694.1106
www. pattisonsign.com
This sign to be installed in accordance with the requirements of Article 600 of the ® Fluorescent, Neon and "ID lamps contain Mercury("G).
SA+ .L National Electrical Code and/or other applicable local codes. Disposem of lamps according ro ingLoral, provincial, Stale or Federal Laws.
C s C us This includes proper grounding and banding of the sign.
E07
NEW ATM Canopy
WFR-ATM-C-NI-GTTW
length of awning varies
Existing Wall
A Bottom Vlew I ATM Awning For Standard Wall l Light Layout Detail
v Scele:N.TS
ATM Awning (Over Standard ATM Wall — B6310)
0 IsomMric View I ATM Awning l Exterior Only
scale: NTs.
MOUNTING: Sign contractor responsible for field survey of existing
conditions prior to shop drawing submittal to include appropriate attachment method.
All mechanical fasteners to be concealed if possible. Visible fasteners to be painted out to match sign panel.
5'-0" Minimum to 15'-0" Maximum
ATM Awning Over Standard ATM Wall - B6310:
The awning should be used for exterior ATM's at retail locations when the building architecture does not
provide customers with protection from the elements. For the low profile B6310-Standard thru-the-wall
ATM (with no tone -on -tone) the Cree lighting fixtures (KR6) are required to be used for awning illumination.
The Wells Fargo signage (screen printed letters) should not be provided for use on these awnings.
m�
e
5' minimum to 15' maximum
A Elevation I ATM Awning I Exterior Only
rvrs
d-6--
' a - It
TL3-46675
Date: 09-09-2022
Sole: NITS
Sales: T. Bailey
Designer: M. Holman
Rev. R:
Date:
Revision Note:
Required:
Final dimensions subject to
site survey and/or technical
specifications.
W 120V 347V
Other
• tar
Signature
MM/DD/VYTy
It is the Customer's responsibility to
ensure that the structure of the
building is designed and constructed
to accept the installation of the signs
being ordered. Please ask PSG
to provide further details if required.
All rights reserved. The artwork
depicted herein are copyright and
are the exclusive property of
Pattison Sign Group and as such
cannot be reproduced in whale or
in part without written permission
by Paulson Sign Group.
WF BE 142560
Wells Fargo
1625 Seminole Trail
arlottesville, VA 22901
Pattison Sign Group
Powering Your Brand
520 W Summit Hill, Suite 702, Knoxville TN, 37902
(Toll Free) 1.866.635.1110 (Fax) 1.888.694.1106
www. pattisonsign.com
This sign to be installed in accordance with the requirements of Article 600 of the ® m
Fluorescent, Neon and "ID lamps contain Mercury("G).
SA+ .L National Electrical Code and/or other applicable local codes. Dispose of the lamps according to Loral, provincial, Stale or Federal Laws.
C s c us This includes proper grounding and banding of the sign.
E07
NEW ATM Canopy
WFR-ATM-C-NI-GTTW
length of awning varies
Existing Wall
II
II
I
II
II
I
v
II
II
II
II
II
II
CY
II
II
II
II
II
li
II
li
A Bottom View I ATM Awning For Standard Wall I Light Layout Detail
Style: N.T.S
42"
Manual
disconnect
switch
1.5"x 1.5"
aluminum
angle frame
ao
Existing
storefront
Paint Flange
Wells Fargo red Wall
A Side View I ATM Awning For Standard Wall I Exterior Only
Scale: N.T.S
MOUNTING: Sign contractor responsible for field survey of existing
conditions prior to shop drawing submittal to include appropriate attachment method.
All mechanical fasteners to be concealed if possible. Visible fasteners to be painted out to match sign panel.
3/4"x 1"x 1/16"
aluminum angle
Red Alpolic _
ACM material
#8 x 3/4" countersunk
sheet metal screws. -
Heads to be painted red
1 1/2" alum!
Sunbrella "Jockey Red"
canvas material
to
A ATMAvmIng l Tubular Frame Detail
Scale: N.T.S
1 1/2" aluminum
tube
3/4" x 1"x 1 /16" aluminum angle
pop riveted to 1 1/2" x 1 1/2"
aluminum frame
13/4"
. a . 0
TL3-46675
Date: 09-09-2022
Sole: NITS
Sales: T. Bailey
Designer: M. Holman
Rev. R:
Date:
Revision Note:
Required:
Final dimensions subject to
site survey and/or technical
specifications.
❑f 120V ❑ 347V
Other
Signature
MM/DD/VYVy
It is the Customer's responsibility to
ensure that the structure of the
building is designed and constructed
to accept the installation of the signs
being ordered. Please ask PSG
to provide further details if required.
All rights reserved. The artwork
depicted herein are copyright and
are the exclusive property of
Pattison Sign Group and as such
cannot be reproduced in whale or
in part without written permission
by Partisan Sign Group.
WF BE 142560
Wells Fargo
1625 Seminole Trail
arlottesville, VA 22901
Pattison Sign Group
Powering Your Brand
520 W Summit Hill, Suite 702, Knoxville TN, 37902
(Toll Free) 1.866.635.1110 (Fax) 1.888.694.1106
www. pattisonsign.com
This sign to be installed in accordance with the requirements of Article 600 of the ® m
Fluorescent, Neon and lamps contain Mercury("G).
SA+ .L National Electrical Code and/or other applicable local codes. Dispose of the lamps according to Loral, provincial, Stale or Federal Laws.
C s c us This includes proper grounding and banding of the sign.
E07