HomeMy WebLinkAboutSDP200800159 Review Comments Minor Amendment 2009-02-20ALg�,��
�'IRGINZ�`
COUNTY OF ALBEMARLE
Department of Community Development
401 McIntire Road, Room 227
Charlottesville, Virginia 22902 -4596
Phone (434) 296 -5832 Fax (434) 972 -4126
MEMORANDUM
TO: Megan Yanigloss, Senior Planner
FROM: Brent Nelson
RE: Blue Ridge Shopping Center, Minor Amendment, SDP 08 -159
DATE: February 20, 2009
I have reviewed the Site Plan Minor Amendment for the above referenced proposal consisting of the following
drawings:
Sheet AO Cover Sheet, latest revision date 1/29/09
Sheet SP1 Site Plan, latest revision date 1/29/09
Sheet SP 2 Site Plan, latest revision date 1/29/09
Sheet L1 Illumination Plan, latest revision date 1/29/09
Sheet L2 Light Fixtures, latest revision date 4/15/02
Sheet C -1 Pump Station, latest revision date 11/18/08
Sheet C -2 Storm Profiles, latest revision date 11/18/08
Outstanding issues that will need to be further addressed are listed below:
Issue: Building A/ Wall- Mounted Light Fixture
Comments: Sheet L 1 Illumination Plan shows the location of 2 wall- mounted light fixtures on the north (EC)
elevation of Building A with the note: The wall mountedfixtures are the same as the pole mountedfixtures.
The pole- mounted fixtures are identified as a Citation brand shoe box design; the lighting cutsheet is illegible.
A drawing of the north (EC) elevation, showing the fixture on the building at its intended height, was not
included with this submission. The shoebox design of the proposed fixture is not appropriate for the
architectural style of this building and elevation. A fixture design reflective of the building's architectural style,
with a black or bronze finish, at a height not to exceed 16' above finished grade would be appropriate.
Recommendations: Revise the application to show the use of a different wall- mounted fixture, with a style that
is reflective of the building architecture, in a black or bronze finish and at a height above grade not to exceed
16'. Provide a drawing of the north (EC) elevation with the fixture shown at its intended height. Make sure the
lighting cutsheet, included in the set of drawings, is legible.